家用窗帘和悬挂织物检测

GB/T 5296.4-2012消费品使用说明.第4部分：纺织品和服装

GB 5296的本部分规定了纺织品和服装使用说明的基本原则、标注内容和标注要求。本部分适用于在国内销售的纺织品和服装。附录A所列产品不属于本部分的范围。本部分给出了使用说明缺陷的判别，见附录B.

GB/T 5465.2-2008电气设备用图形符号.第2部分:图形符号

GB/T 5464的本部分规定了电气设备用图形符号及其名称、含义和应用范围。本部分的图形符号适用于以下用途：——标识设备或其组成部分（如控制器或显示器）；——指示功能状态或功能（如开、关、告警）；——标示连接（如端子、接头）；——提供包装信息（如包装物的标识、装卸说明）；——提供设备的操作说明（如使用限制）。本部分的图形符号不适用于以下用途。——安全标记；——公共信息；——图样的简图；——产品技术文件。

GB/T 15732-1995汉字键盘输入用通用词语集

本标准规定了汉字键盘输入用通用词语。 本标准适用于汉字键盘输入、方案优化和评测。中文信息处理的其他领域也可参照执行。

GB 18401-2010纺织产品基本安全技术规范

本标准规定了纺织产品的基本安全技术要求、试验方法、检验规则及实施与监督。纺织产品的其他要求按有关的标准执行。本标准适用于在我国境内生产、销售的服用、装饰用和家用纺织产品。出口产品可依据合同的约定执行。

GB/T 19980-2005纺织品 服装及其他纺织终产品经家庭洗涤和干燥后外观的评价方法

本标准规定了一种评价服装和其他纺织终产品经过一次或几次家庭洗涤和干燥后，织物外观平整度、接缝平整度和熨烫褶皱保持性等外观的试验方法。 本标准适用于具有任意织物结构、可水洗的纺织终产品。由于评价的是纺织品终产品，它们已经由生产商供货或者正待穿用，所以，本标准不包括缝制和熨烫褶皱的加工技术。加工技术应根据织物性能选用。 本方法主要使用GB/T 8629中规定的B型家用洗衣机，但也可使用该标准中规定的A型洗衣机。 已经认识到印花和其他图案可能会掩盖纺织终产品的起皱外观，但本方法主要还是根据对包含了这种影响的试样的视觉外观进行评级。

GB 30533-2014学校安全与健康设计通用规范

本标准规定了学校健康安全的管理、计划和设计、教学工作环境、服务、教学区域设备、工具和加工有关健康安全的通用要求。本标准适用于普通中小学校、中等职业学校。大学和相关机构可参照执行。

GB/T 33995-2017电子商务交易产品信息描述 家居产品

本标准规定了电子商务交易中家居产品信息的描述属性、方法、模型、摘要描述以及扩展方法。本标准适用于电子商务中家居产品信息的描述、展示、交换和管理等。

UL 1574-2004道路照明系统

1.1 These requirements cover track lighting systems intended for permanent connection to sources of supply in commercial or residential ordinary locations in accordance with the National Electrical Code, NFPA 70. The track lighting systems covered by this standard are rated: a) 300 volts or less; b) 150 volts or less to ground; and c) 50 amperes or less. 1.2 Lighting track is intended to be permanently installed and permanently connected to a branch circuit not exceeding 277 volts, nominal to ground, and 50 amperes. 1.3 These requirements cover: a) Track networks consisting of track and connectors; b) Mono-, duo-, and multi-point canopies; c) Incandescent, fluorescent, and High Intensity Discharge (HID) luminaire assemblies intended to be electrically connected to and physically supported by the track in track networks and canopies; d) Mounting means for the track; and e) Accessories. 1.4 These requirements do not cover: a) Busways intended for lighting, receptacles, or other general-purpose adaptors covered by the Standard for Busways, UL 857, and intended for use in accordance with Article 364 of the National Electrical Code, NFPA 70; or b) Track lighting systems for marine use aboard a ship or boat. 1.5 Track lighting systems are not intended for use: a) In wet or damp locations; b) In installations where the track is concealed; c) In hazardous locations; d) Where subject to physical damage; e) Where the track is extended through walls or partitions of building structures; f) Where subject to corrosive vapors; or g) In storage battery rooms. 1.6 A track lighting luminaire assembly that uses a tungsten-halogen lamp, fluorescent lamp, or high-intensity-discharge lamp shall also comply with the applicable requirements from the Standard for Luminaires, UL 1598.

NF P28-002-1-1-2008建筑施工工程.隔墙.第1-1部分:技术模型条款的合同单

Le présent document s'applique : aux façades rideaux, telles que définies et conformes à la norme NF EN 13830 ; aux façades semi-rideaux telles que définies à l'article 3 du présent document et qui font l'objet des dispositions constructives décrites en Annexe A ; aux façades constituées d'une association de différentes fenêtres, portes ou ensembles composés et dont leurs liaisons ne sont pas limitées à des bandes horizontales ou verticales, qui relèvent du NF DTU 36.5 ; aux façades verticales et celles dont l'inclinaison sur la verticale tant vers l'extérieur que vers l'intérieur n'excède pas 15o.Ces types d'ouvrages de façade sont désignés dans la suite du document par le mot façade.Le présent document vise les façades dont les ossatures, bâtis et cadres sont métalliques, avec ou sans coupure thermique et intégrant leurs remplissages.Le présent document couvre l'exécution de façades neuves, sur ossature primaire (béton, charpente métallique, bois) neuve ou existante, destinées à la réalisation de tous types de bâtiments.Toutes les prescriptions du présent document sont applicables aux façades dont les remplissages sont conçus avec la technique du vitrage extérieur collé. Cependant la partie proprement dite du collage dit aussi \"noeud de collage\" sur le cadre métallique rapporté, s'insérant dans l'ossature secondaire doit être évalué conformément à l'ETAG 002 (European Technical Approval Guideline) et au cahier CSTB 3488.Le présent document est applicable dans toutes les zones climatiques ou naturelles françaises. Le présent document ne s'applique pas : aux façades dont les ossatures sont en bois ou en matériaux de synthèse ; aux bardages ainsi qu'aux parties opaques de façade comportant des techniques non menuisées comme les bardages rapportés, les vêtages, les vêtures, et les remplissages en pierre ; aux ouvrages avec Vitrages Extérieurs Attachés (VEA).

DIN EN 13120-2014内用百页窗.包括安全性的性能要求.德文版本EN 13120-2009+A1-2014

This European Standard specifies the requirements which internal blinds shall fulfil when fitted to a building. It deals also with the significant machinery hazards relating to construction, transport, installation, operation and maintenance of internal blinds (see list of significant hazards in Annex B). It applies to internal blinds, whatever their design and the nature of the materials used, as listed below: - venetian blind: free hanging, guided, non-retractable; - roller blind: free hanging, side guided, with tensioned fabric; - vertical blind: free hanging, with top and bottom track, sloping headrail; - pleated and honeycomb blind: free hanging, guided, laterally moving, tensioned; - Roman Shades; - Austrian / Festoon blinds; - panel blinds; - plantation shutters; - roll-up blinds. These products may be operated manually, with or without compensating springs, or by means of electric motors (power operated products). This standard does not apply to draperies and insect screens. It does not apply to blinds in sealed glazed units with the exception of requirements related to protection from strangulation. NOTE Insect screens may be installed either internally or externally. However, because they are always exposed to external conditions in use ( windows/doors opened), insects screens are covered by EN 13561 applying to external blinds and awnings. Noise aspects are not treated in this standard because this is not considered a safety issue. This standard is not applicable to internal blinds which are manufactured before the date of publication of this standard.

DIN EN ISO 22610-2006医护人员和器械用手术单、手术衣和洁净服.测定防潮湿细菌渗透的试验方法(ISO 22610:2006)

This International Standard specifies a test method, with associated test apparatus (see Annex A), which is used to determine the resistance of a material to the penetration of bacteria, carried by a liquid, when subjected to mechanical rubbing.

BS 8511-2010小型船上固体燃料加热和烹饪设施的安装用实施规则

This code of practice covers the design, installation and operation of solidfuel heating and cooking appliances (hereafter referred to as appliances)which are suitable for fitting into small craft from 2.5 m to 24 m inlength. These appliances can burn either natural or manufactured solidmineral fuels, or natural or manufactured wood logs.This code of practice gives guidance on appliance selection, designconsiderations, installation requirements, inspection and testing, andpreparing instructions for the end user of the appliance. Guidance isalso provided on the necessary safety information to be provided to theend user concerning the maintenance and safe use of these appliances.This code of practice only applies to freestanding appliances withclosable doors, with and without legs.This code of practice does not apply to the installation of applianceswith a firebox volume of less than 0.01 m3 and a grate size smallerthan 0.05 m2, and where the dimensional recommendations of theinstallation cannot be met (e.g. in traditional narrowboat boatman’sback cabins).

BS PD CEN/TR 13833-2003施工企业的资格鉴定

This European Standard specifies the definitions, procedures, criteria and their assessment as well as therespective documentation related to a system of qualification of construction enterprises.