蓬盖用织物检测

GB/T 15557-2008服装术语

本标准规定了服装及服饰工业常用的术语、定义或说明。本标准适用于服装和服饰设计、生产、技术、教学、贸易及其相关领域。

HG/T 2714.1-1995气胀救生筏.A、D型筏

本标准规定了气胀救生筏的产品分类、技术要求、试验方法、检验规则、标志、包装、运输及贮存的内容。 本标准适用于航行船舶用的抛投式气胀救生筏和可吊式气胀救生筏。统称救生筏。

CJJ 90-2009生活垃圾焚烧处理工程技术规范

为规范生活垃圾（以下简称垃圾）焚烧处理工程建设的技术要求，做到焚烧工艺技术先进、运行可靠、控制污染、安全卫生、节约用地、维修方便、经济合理、管理科学、制定本规范。本规范适用于以焚烧方法处理垃圾的新建和改扩建工程的规划、设计、施工及验收。

JC/T 996-2006玻璃纤维壁布

本标准规定了玻璃纤维壁布(以下简称：壁布)的产品代号、要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于以定长玻璃纤维纱或玻璃纤维变形纱的机织物为基材，经表面涂覆处理而成的，用于建筑内墙装饰装修的玻璃纤维织物。

QB/T 4042-2010聚氯乙烯涂层膜材

本标准规定了聚氯乙烯涂层膜材的分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于以聚对苯二甲酸乙二醇酯纤维织物为底基，以聚氯乙烯增塑糊为涂覆料，采用直接涂刮工艺而成的蓬盖用聚氯乙烯涂层膜材。

SL/T 225-1998水利水电工程土工合成材料.应用技术规范

本规范适用于水利水电工程的以下分部工程：滤层、排水、防渗、防护以及土体加筋。以设计为主，兼述施工。

UL 1574-2004道路照明系统

1.1 These requirements cover track lighting systems intended for permanent connection to sources of supply in commercial or residential ordinary locations in accordance with the National Electrical Code, NFPA 70. The track lighting systems covered by this standard are rated: a) 300 volts or less; b) 150 volts or less to ground; and c) 50 amperes or less. 1.2 Lighting track is intended to be permanently installed and permanently connected to a branch circuit not exceeding 277 volts, nominal to ground, and 50 amperes. 1.3 These requirements cover: a) Track networks consisting of track and connectors; b) Mono-, duo-, and multi-point canopies; c) Incandescent, fluorescent, and High Intensity Discharge (HID) luminaire assemblies intended to be electrically connected to and physically supported by the track in track networks and canopies; d) Mounting means for the track; and e) Accessories. 1.4 These requirements do not cover: a) Busways intended for lighting, receptacles, or other general-purpose adaptors covered by the Standard for Busways, UL 857, and intended for use in accordance with Article 364 of the National Electrical Code, NFPA 70; or b) Track lighting systems for marine use aboard a ship or boat. 1.5 Track lighting systems are not intended for use: a) In wet or damp locations; b) In installations where the track is concealed; c) In hazardous locations; d) Where subject to physical damage; e) Where the track is extended through walls or partitions of building structures; f) Where subject to corrosive vapors; or g) In storage battery rooms. 1.6 A track lighting luminaire assembly that uses a tungsten-halogen lamp, fluorescent lamp, or high-intensity-discharge lamp shall also comply with the applicable requirements from the Standard for Luminaires, UL 1598.

DIN EN ISO 8936-2017休闲娱乐车辆的遮阳棚.要求和测试方法(ISO 8936-2016);德文版本EN ISO 8936-2017

This document specifies requirements, test methods and material performance characteristics for vehicle awnings. It applies to awnings intended to be pitched and struck. This document is not applicable to: a) sun awnings: structure detachable from the vehicle which is used to provide shelter from the sun, but is not designed or constructed to provide shelter from wind, rain or snow; NOTE 1 A sun awning can be used with additional front and side panels to form an enclosure, but this enclosure would not meet the requirements of an awning as defined in this document. b) external blinds: structure permanently fixed to a vehicle which is used to provide shelter from the sun, but is not designed or constructed to provide shelter from wind, rain or snow; NOTE 2 An external blind can be used with additional front and side panels to form an enclosure, but this enclosure would not meet the requirements of an awning as defined in this document. c) fixed awnings: permanent awning which is not designed for mobile use. EXAMPLE Awnings equipped with square aluminium frames or timber supporting structures and the possibility to install living compartment windows and doors.