玻璃纤维缝纫线检测

GB/T 2035-2008塑料术语及其定义

本标准定义了用于塑料工业中的术语。当术语有一个或多个同义词时，同义术语跟随在优选的术语之后。进而以正确的字母排序详细地列出同义词。不赞成的术语用“不赞成”指明。可能找不出定义或没有指明定义时，在其术语后面利用一个符号→。缩略符号“cf.”(参见)指明使用者可以参见其他术语（不是同义词）、定义或以下述的符号对该术语所含信息进行注解。

GB/T 7113.2-2014绝缘软管 第2部分:试验方法

GB/T 7113的本部分规定了包括热收缩管在内的绝缘软管的试验方法。这类软管主要被用于电气设备的导体部分和接头处的绝缘。本部分适用于绝缘软管。

GB/T 13773.1-2008纺织品.织物及其制品的接缝拉伸性能.第1部分:条样法接缝强力的测定

GB/T 13773的本部分规定了采用条样法对接缝的缝合处施加垂直方向的力，测定其接缝承受大力的方法。本部分适用于机织物及其制品，也适用于其他技术生产的织物。本部分不适用于弹性机织物、土工合成材料、非织造布、涂层织物、玻璃纤维织物以及碳纤维和聚烯烃扁丝生产的织物。接缝织物根据产品要求或有关各方面的同意，可以从缝合制品中获得，也可以用织物样品制备。本方法仅适用于直线接缝，不适用于较大弯曲的接缝。本方法规定采用等速伸长（CRE）试验仪。

GB/T 13773.2-2008纺织品.织物及其制品的接缝拉伸性能.第2部分:抓样法接缝强力的测定

GB/T 13773 的本部分规定了采用抓样法对接缝的缝合处施加垂直方向的力，测定其接缝承受大力的方法。本部分适用于机织物及其制品，也适用于其他技术生产的织物。本部分不适用于弹性机织织物、土工合成材料、非织造布、涂层织物、玻璃纤维织物以及碳纤维和聚烯烃扁丝生产的织物。接缝织物根据产品要求或有关各方的同意，可以从缝合制品中获得，也可以用织物样品制备。本方法仅用于直线接缝，不适用于较大弯曲的接缝。本方法规定采用等速伸长（CRE)试验仪。

GB/T 35611-2017绿色产品评价 纺织产品

本标准规定了绿色纺织产品的评价指标和评价方法。本标准适用于各类纺织产品，包括纤维、纱线、织物、制品及其附件。

BB/T 0037-2012双面涂覆聚氯乙烯阻燃防水布和篷布

本标准规定了双面涂覆聚氯乙烯阻燃防水布(以下简称涂覆布)和篷布的产品类型、代码、要求、试验方法、检验规则等。本标准适用于以维纶纤维、尼龙纤维、聚酯纤维、玻璃纤维等织物为基布,双面涂覆聚氯乙烯树脂的涂覆布和篷布。

HB 7756.12-2005基于CATIA建模要求 第12部分：绝缘件

本部分规定了应用CATIA软件实施绝缘件建模的专用要求。 本部分适用于型号研制中应用CATIA软件设计、修改和发放的绝缘件建模。也适用于民品开发项目中使用CATIA软件设计、修改和发放的绝缘件类零件建模。

JC/T 573-2007玻璃纤维缝纫线

本标准规定了玻璃纤维缝纫线（以下简称缝纫线）的分类与代号、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于由玻璃纤维原丝经退并、加捻并经浸涂处理而制成的光滑的合股纱线。主要用于缝制玻璃纤维过滤布、玻璃纤维毡和其它玻璃纤维制品。

JC/T 573-2023玻璃纤维缝纫线

本文件规定了玻璃纤维缝纫线的分类与代号、要求、试验方法、检验规则、标志、包装、运输和贮存。\r本文件适用于由玻璃纤维原丝经退并、加捻并经涂覆处理而制成的光滑的合股纱线。主要用于缝制玻璃纤维过滤布、玻璃纤维缝毡和其它玻璃纤维制品。

LY/T 2583-2016森林防火避火罩

本标准规定了森林防火避火罩(以下简称“避火罩”)的术语和定义、设计要求、性能要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。本标准适用于森林扑火人员应急自救时使用的避火罩。

NB/T 20358.10-2018核电厂建设工程预算定额 第10部分:核岛防腐、保温工程

本部分规定了核电厂建设工程预算定额中的核岛防腐、保温工程定额。本部分适用于压水堆核电机组新建、扩建工程的核岛工程，以及BOP工程中的核岛废液贮罐厂房、常规岛废液贮罐厂房、放射性固体废物处理辅助厂房、固体废物暂存库、放射性机修及去污车间等有核安全要求的子项。其他核电堆型和核工程可参考使用。

ASTM D4030-1999玻璃纤维绳和缝纫线规格

1.1 This specification covers the requirements for continuous glass filament sewing thread; and continuous filament cord, untreated and neoprene treated. 1.2 This specification is intended to assist ultimate users by designating the types of these products that are typical in the industry. 1.3 This specification shows the values in both inch-pound units and in SI units. \"Inch-pound units\" is the technically correct name for the customary units used in the United States. \"SI\" units is the technically correct name for the system of metric units known as the International System of Units. The values stated in inch-pound units are to be regarded as standard; the values in SI units are provided as information only. 1.4 The following precautionary caveat pertains only to the test methods portion, Sections 22 through 33, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1-This specification is one of a series to provide a substitute for Military Specifications: MIL-Y-1140H Yarn, Cord, Sleeving, Cloth, and Tape-Glass MIL-C-9084C Cloth, Glass Finished for Resin Laminates

ASTM D4030-2004玻璃纤维绳和缝纫线的标准规范

1.1 This specification covers the requirements for continuous glass filament sewing thread; and continuous filament cord, untreated and neoprene treated.1.2 This specification is intended to assist ultimate users by designating the types of these products that are typical in the industry.1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D4030/D4030M-2009玻璃纤维绳和缝纫线的标准规范

1.1 This specification covers the requirements for continuous glass filament sewing thread; and continuous filament cord, untreated and neoprene treated. 1.2 This specification is intended to assist ultimate users by designating the types of these products that are typical in the industry. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D4030/D4030M-2009e1玻璃纤维绳和缝纫线的标准规范

1.1 This specification covers the requirements for continuous glass filament sewing thread; and continuous filament cord, untreated and neoprene treated. 1.2 This specification is intended to assist ultimate users by designating the types of these products that are typical in the industry. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D4030/D4030M-2015玻璃纤维绳和缝纫线的标准规格

1.1x00a0;This specification covers the requirements for continuous glass filament sewing thread; and continuous filament cord, untreated and neoprene treated. 1.2x00a0;This specification is intended to assist ultimate users by designating the types of these products that are typical in the industry. 1.3x00a0;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.4x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

NF G38-116-2008土工织物.用宽条法对接头/接缝处的拉伸试验

La présente Norme internationale spécifie une méthode d'essai de référence pour la détermination des propriétés mécaniques en traction des joints et coutures des géosynthétiques, à l'aide d'une bande de grande largeur. La méthode est applicable à la plupart des géosynthétiques. Elle s'applique également aux géogrilles, mais il peut s'avérer nécessaire de modifier les dimensions de l'éprouvette. Cet essai n'est pas applicable aux barrières géosynthétiques polymériques et bitumineuses.Cette méthode quantifie la résistance à la traction d'un joint ou d'une couture entre géosynthétiques. Elle peut fournir des données indiquant la résistance à la traction que peut atteindre un joint ou une couture. L'efficacité du joint ou de la couture peut être calculée en comparant la résistance à la traction du joint ou de la couture avec la résistance de matériaux d'un seul tenant, déterminée conformément à l'ISO 10319.Sont inclus des modes opératoires pour la mesure des propriétés mécaniques en traction d'éprouvettes conditionnées et d'éprouvettes humides.Il peut être nécessaire de modifier légèrement les techniques employées pour des géosynthétiques particuliers, par exemple des géotextiles de renforcement, des produits à mailles ou géotextiles en fibre de verre, afin d'empêcher tout glissement dans les mors ou tout endommagement après serrage dans les mors. L'essai de base des joints ou coutures de tous types de géosynthétiques utilise des éprouvettes de 200 mm de large, avec une réserve de 25 mm supplémentaires de chaque côté au niveau du joint ou de la couture pour assurer leur stabilité pendant l'essai (voir Figure 1).

DIN EN ISO 472-2013塑料.词汇表(ISO 472-2013).三种语言版本EN ISO 472-2013

This standard defines terms used in the plastics industry, including terms and definitions appearing in plastics standards (of ISO/TC 61), and general terms and definitions of polymer science used in all aspects of plastics technology.

DIN EN ISO 14362-1-2017纺织品.源于偶氮着色剂的某些芳香胺的测定方法.第1部分:通过或未经萃取纤维获得某些偶氮着色剂的使用检测(ISO 14362-1-2017);德文版本EN ISO 14362-1-2017

This document describes a method to detect the use of certain azo colorants that may not be used in the manufacture or treatment of certain commodities made of textile fibres and that are accessible to reducing agent with and without extraction. Azo colorants accessible to reducing agent without extraction are those used to colour with pigments or to dye - cellulosic fibres (e. g. cotton, viscose), - protein fibres (e. g. wool, silk), and - synthetic fibres (e. g. polyamide, acrylic). Azo colorants accessible with extraction are those used to dye man-made fibres with disperse dyes. The following man-made fibres can be dyed with disperse dyes: polyester, polyamide, acetate, triacetate, acrylic and chlorofibre. The method is relevant for all coloured textiles, e. g. dyed, printed and coated textiles.

BS 8509-2008+A1-2011家用儿童床.安全性要求和试验方法

This British Standard specifies requirements for the safety of children’sbeds for domestic use with a maximum internal width of 1 000 mm anda maximum height of bed base of 600 mm .The requirements apply to children’s beds that are fully assembled andready for use.This British Standard does not apply to beds for adults, foldawaybeds, bunk and high beds, cabin/mid-height beds, children’s cots,bedside cots and children’s cots that allow free access for the child bymeans of a hinged opening or removal of some vertical bars/slats.This standard does not cover products that have been incorporated intochildren’s beds, for example luminaires, tables or storage furniture.