拉挤玻璃纤维增强塑料杆检测

拉挤玻璃纤维增强塑料杆检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 13096-2008拉挤玻璃纤维增强塑料杆力学性能试验方法

本标准规定了拉挤玻璃纤维增强塑料杆力学性能试验的拉伸性能、弯曲性能、面内剪切强度、表观水平剪切强度试验方法。本标准适用于测定直径为（3～25）mm的拉挤玻璃纤维增强塑料杆的拉伸性能、直径大于13mm的拉挤玻璃纤维增强塑料杆的弯曲性能、直径为（16～32）mm的拉挤玻璃纤维增强塑料杆的面内剪切强度和拉挤玻璃纤维增强塑料杆的表观水平剪切强度。

YY/T 0474-2004外科植入物用聚L-丙交酯树脂及制品.体外降解试验

本标准描述了聚L-丙交酯在体外降解试验条件下化学或机械性能变化的测定方法。 本标准的目的在于比较和(或)评价材料或加工条件。 本标准适用于生产外科植入物的各种形态的聚L丙交酯。包括： a)块材； b)加工材； c)终产品(经包装和灭菌的植入物)。 本标准中所规定的试验方法用于测定聚L-丙交酯体外降解速度和材料性能的变化。这些体外试验方法不能用来确切地预测材料在体内条件下的行为。

JC/T 2287-2014玻璃纤维增强塑料快装脚手架

本标准规定了玻璃纤维增强塑料快装脚手架(以下简称脚手架)的结构、分类和标记、材料和配件、要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于拉挤或拉挤缠绕工艺制作的玻璃纤维增强塑料型材为主构件的,用于电力登高作业、机械安装及维修登高作业等工业登高作业的脚手架。本标准不适用于建筑施工快装脚手架。

SY/T 5029-2013抽油杆

本标准规定了有杆抽油系统中的钢制抽油杆和短杆、光杆和光杆衬套、接箍和异径接箍、纤维增强塑料抽油杆、加重杆、光杆卡子、密封盒、抽油三通的设计要求和试验方法。附录A至附录H中规定了具体产品要求。附录I中包括了螺纹量规的一些要求。附录J用图解说明了有杆抽油系统的零部件。附录K至附录N中分别给出了抽油杆不连续性的具体实例、钢制抽油杆疲劳性能要求和试验方法、钢制抽油杆冲击韧性及抽油杆和附件的代号表示方法。本标准适用于抽油杆及其附件的设计开发、制造、检验和试验。本标准不涉及抽油杆导向器、抽油杆旋转器、剪切工具、脱接器、稳定杆、用在密封盒中的密封元件或密封盒和抽油三通的连接装置。同时,本标准中也不包括这些产品的安装、操作和维护方面的内容。

YD/T 1181.3-2011光缆用非金属加强件的特性.第3部分：芳纶增强塑料杆

本部分规定了光缆用非金属加强件——芳纶增强塑料杆（以下简称KERP）的型号、要求和试验方法。本部分适用于光缆用非金属加强件芳纶增强塑料杆。

JB/T 10943-2010电气绝缘用玻璃纤维 增强挤拉型材 干式变压器用撑条

本标准规定了电气绝缘用玻璃纤维增强挤拉型材-干式变压器用撑条的产品要求、试验方法、检验、标志、包装、运输和贮存。本标准适用于电气绝缘用玻璃纤维增强挤拉型材-干式变压器用撑条。

JB/T 11641-2013电除尘器用高分子绝缘轴

本标准规定了电除尘器用高分子绝缘轴(以下简称绝缘轴)的术语和定义、分类、要求、试验方法、检验规则、标志、使用说明书及包装、运输和贮存等。本标准适用于电除尘器高分子绝缘轴。

ASTM D3914-2002(2016)拉挤玻璃纤维增强型塑料杆材的平面内剪切强度的标准试验方法

5.1x00a0;Shear tests of various kinds are widely used in the reinforced plastics industry to assess the strength of the reinforcement-to-resin bond in polyester-, vinyl ester-, and epoxy-resin composites. In addition to their importance for the generation of data for research and development, quality control, and specification purposes, such tests are of fundamental value to the fibrous reinforcement industry, since they can be used to determine the potential of new sizing systems for the surface treatment of glass fibers. 5.2x00a0;The in-plane shear strength of pultruded cylindrical composites is an important property from an engineering standpoint, since pultruded rod, as such, is used in many structural applications. 1.1x00a0;This test method covers the determination of the in-plane shear strength of pultruded, glass-fiber reinforced, thermosetting plastic rod of diameters ranging from 19 to 32 mm (3/4x00a0;to 11/4x00a0;in.). 1.2x00a0;The values stated in SI units are to be regarded as the standard. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Note 2 and Note 3. Note 1:x00a0;There is no known ISO equivalent to this standard.

ASTM D3916-2008(2016)拉挤玻璃纤维增强塑料杆拉伸性能的标准试验方法

3.1x00a0;The high axial-tensile strength and the low transverse-compressive strength of pultruded rod combine to present some unique problems in determining the tensile strength of this material with conventional test grips. The high transverse-compressive forces generated in the conventional method of gripping tend to crush the rod, thereby causing premature failure. In this test method, aluminum-alloy tabs contoured to the shape of the rod reduce the compressive forces imparted to the rod, thus overcoming the deleterious influence of conventional test grips. 3.2x00a0;Tensile properties are influenced by specimen preparation, strain rate, thermal history, and the environmental conditions at the time of testing. Consequently, where precise comparative results are desired, these factors must be carefully controlled. 3.3x00a0;Tensile properties provide useful data for many engineering design purposes. However, due to the high sensitivity of these properties to strain rate, temperature, and other environmental conditions, data obtained by this test method should not, by themselves, be considered for applications involving load-time scales or environmental conditions that differ widely from the test conditions. In cases where such dissimilarities are apparent, the sensitivities to strain rate, including impact and creep, as well as to environment, should be determined over a wide range of conditions as dictated by the anticipated service requirements. 1.1x00a0;This test method describes a procedure for determining the tensile properties of pultruded, glass-fiber-reinforced thermosetting plastic rod of diameters ranging from 3.2 mm (1/8x00a0;in.) to 25.4 mm (1 in.). Little test specimen preparation is required; however, reusable aluminum tab grip adapters (Fig. 1) of appropriate size are required to prevent premature failure of the specimens at the grips. Note 1:x00a0;Sandblast Clamp Face with 100-mesh Carbide at 100 psi. 1.2x00a0;The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Note 3 and Note 4. Note 1:x00a0;There is no known ISO equivalent to this standard.