悬索桥预制主缆丝股检测

GB/T 32963-2016锌铝合金镀层钢丝缆索

本标准规定了锌铝合金镀层钢丝缆索的术语和定义、符号、结构形式、规格与型号、技术要求、试验方法、检验规则、标志、包装、运输和储存。本标准适用于悬索桥主缆用预制平行锌铝合金镀层钢丝索股、斜拉桥用热挤聚乙烯锌铝合金镀层钢丝拉索，悬索桥锌铝合金镀层钢丝吊索可参照使用。

GB/T 50299-2018地下铁道工程施工质量验收标准

本标准适用于新建、扩建、改建地下铁道工程的施工质量验收。

GB 50460-2015油气输送管道跨越工程施工规范

本规范适用于新建或改、扩建的油气输送管道跨越人工或天然障碍物工程的施工。不适用于沿既有桥梁敷设管道。

GB/T 51310-2018地下铁道工程施工标准

本标准适用于新建、扩建、改建地下铁道工程的施工。

CJJ/T 275-2018市政工程施工安全检查标准

本标准适用于市政工程施工安全生产的检查评定。

JTG/T J23-2008公路桥梁加固施工技术规范

本规范适用于公路桥梁加固工程的施工。公路桥梁的改建与大、中修工程可参照执行。

BS EN 1993-1-11-2006欧洲法规3.钢结构的设计.带受拉构件结构的设计

prEN1993-1-11 gives design rules for structures with tension components made of steel, which, due to their connections with the structure, are adjustable and replaceable see Table 1.1.NOTE: Due to the requirement of adjustability and replaceability such tension components are generally prefabricated products delivered to site and installed into the structure. Tension components that are not adjustable or replaceable, e.g. air spun cables of suspension bridges, or for externally post-tensioned bridges, are outside the scope of this part. However, rules of this standard may be applicable. This standard also gives rules for determining the technical requirements for prefabricated tension components for assessing their safety, serviceability and durability.NOTE 1: Group A products in general have a single solid round cross section connected to end terminations by threads. They are mainly used as– bracings for roofs, walls, girders– stays for roof elements, pylons– tensioning systems for steel-wooden truss and steel structures, space framesNOTE 2: Group B products are composed of wires which are anchored in sockets or other end terminations and are fabricated primarily in the diameter range of 5 mm to 160 mm, see EN 12385-2.Spiral strand ropes are mainly used as– stay cables for aerials, smoke stacks, masts and bridges– carrying cables and edge cables for light weight structures– hangers or suspenders for suspension bridges– stabilizing cables for cable nets and wood and steel trusses– hand-rail cables for banisters, balconies, bridge rails and guardrailsFully locked coil ropes are fabricated in the diameter range of 20 mm to 180 mm and are mainly used as– stay cables, suspension cables and hangers for bridge construction– suspension cables and stabilizing cables in cable trusses– edge cables for cable nets– stay cables for pylons, masts, aerialsStructural strand ropes are mainly used as– stay cables for masts, aerials– hangers for suspension bridges– damper / spacer tie cables between stay cables– edge cables for fabric membranes– rail cables for banister, balcony, bridge and guide rails.NOTE 3: Group C products need individual or collective anchoring and appropriate protection.Bundles of parallel wires are mainly used as stay cables, main cables for suspension bridges and external tendons.Bundles of parallel strands are mainly used as stay cables for composite and steel bridges.(4) The types of termination dealt with in this part for Group B and C products are– metal and resin sockets, see EN 13411-4– sockets with cement grout– ferrules and ferrule securing, see EN 13411-3– swaged sockets and swaged fitting– U-bolt wire rope grips, see EN 13411-5– anchoring for bundles with wedges, cold formed button heads for wires and nuts for bars.NOTE: For terminology see Annex C.