马桶盖检测

发布时间：2024-06-21 作者：中析研究所浏览：

GB/T 24555-2009200m氦氧饱和潜水作业要求

本标准规定了氦氧饱和潜水作业前的准备、潜水作业设备和装具、氦氧饱和潜水、巡回潜水及饱和潜水减压的要求等。本标准适用于200 m及以浅的氦氧饱和潜水作业。

GB/T 32928-2016电子商务交易产品信息描述家用电器

本标准规定了电子商务交易中家用电器类产品信息的描述属性与方法、模型、摘要描述以及扩展方法。本标准适用于电子商务中家用电器类产品信息的发布、交换、存储和管理等。

GB/T 36154-2018民用飞机客舱公共信息标识

本标准规定了民用飞机客舱公共信息标识的分类、一般要求(设计、图形、文字、颜色及尺寸要求)、详细要求(旅客通告标识、盥洗室标识及厨房、衣帽间及乘务员标识)。本标准适用于民用飞机客舱公共信息的标识。

GB/T 36317-2018电子商务交易产品信息描述家装建材

本标准规定了电子商务交易中家装建材类产品信息的描述属性、描述方法、信息模型、通用信息摘要描述、专用信息摘要描述以及信息扩展方法。本标准适用于电子商务中家装建材类产品信息的描述、展示、交换和管理等。

SB/T 10595-2011清洁行业经营服务规范

本标准规定了清洁服务的分类、基本要求、服务准备、服务提供、服务管理以及服务评价与改进。本标准适用于建筑物、构筑物、设施及公共场所、交通工具（如汽车、船舶等）类泊、河流的水草和水质的清洁等卫生清洁。本标准不适用于家居保洁。

DIN 18040-1-2010可进入建筑物的构造.设计原理.第1部分:公共可进入建筑物

The standard describes the technical conditions that must be in place so that buildings and other works are accessible to persons with disabilities. The requirements stated in this standard aim to ensure that buildings and other works are designed in such a way that everyone is able to use them without assistance. This part of the series of standards deals with the disabled-accessible design and construction of buildings and their facilities that are intended for use by the public as well as of any outside areas belonging to those buildings. Buildings to which the public has access include, in particular, cultural and educational establishments, sports and leisure centres, hospitals and health centres (including doctor's and dentist's surgeries), office buildings, administrative and court buildings, shops and restaurants, car parks, garages and toilets (cf. section 50(2) of the Model Building Code). In contrast to DIN 18024-2, workplaces are no longer dealt with in this standard. Sensory requirements have been included. Furthermore, the content has been thoroughly revised and restructured. Generally speaking, individual clauses initially state the objectives that buildings and facilities have to meet to be considered disabled-accessible and then go on to show how those objectives can be achieved, differentiated according to the various needs of different groups of people, where appropriate.

DIN 19516-2004马桶座圈.要求和试验方法

The document specifies requirements and test methods for WC seats suitable for use with WC pans according to DIN EN 997.

DIN EN 16585-1-2017轨道交通.PRM使用设计.设备和组件板载车辆.第1部分:厕所;德文版本EN 16585-1-2017

This European Standard describes the specific Design for PRM use´ requirements applying to rolling stock and the assessment of those requirements. The following applies to this standard: - the definitions and requirements describe specific aspects of Design for PRM use´ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI; - this standard defines elements which are universally valid for obstacle free travelling including toilets, elements for sitting, standing and moving and clearways and internal doors. The definitions and requirements of this standard are to be used for rolling stock applications; - this standard only refers to aspects of accessibility for PRM passengers. It does not define general requirements and general definitions; - this standard assumes that the rolling stock is in its defined operating condition; - where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements. The 'Equipment and Components' standard is written in three parts: - this document is Part 1 and contains: -- toilets; - part 2 contains: -- handholds; -- seats; -- wheelchair spaces; - part 3 contains: -- clearways; -- internal doors.

DIN ISO 7152-2007野营帐蓬和大蓬车蓬布.术语和等效术语表

This International Standard gives a list of the most frequent terms relating to camping tents and caravan awings together with some definitions. It also covers the relevant terms used in ISO 5912:1993, Camping tents, ISO 8936:1988, Caravan awnings - Safety requirements and ISO 8937:1992, Caravan awnings - Functional requirements and test methods.