衣柜锁墙部件检测

GB/T 6769-2016机车司机室布置规则

本标准规定了机车司机室的布置规则。本标准适用于新造的电力机车和内燃机车的司机室布置。其他机车可参照执行。

GB/T 15761-19952×600MW压水堆核电厂核岛系统设计建造规范

本标准规定了电功率2×600MW压水堆核电厂核岛系统设计和建造的要求。 本标准适用于带钢衬里的预应力混凝土安全壳的2×600MW压水堆核电厂核岛系统的设计和建造。本规范仅提出系统的设计准则而不包括设计方法和设计数据。 其他的压水堆核电厂也可参照使用。

GB/T 25915.4-2010洁净室及相关受控环境 第4部分：设计、建造、启动

GB/T 25915的本部分规定了洁净室设施的设计和建造要求，但并未规定满足那些要求所需的具体技术或契约手段。本部分还给出了一份重要性能参数的目录，一并供洁净室设施的需方、供方和设计方使用。本部分给出的包括启动和确认要求的建造指南。在考虑运行和维护的相关事项时，明确了保证持续、满意运行的设计和建造的基本要素。本部分的应用有如下限定：用户要求由需方或规定方提出；对洁净室设施内的具体工艺未做规定；对消防和安全未做专门规定，消防和安全方面应遵守适用的和地方法规；仅涉及了不同洁净度区域内及之间工艺介质和公用设施的路径；仅涉及了与洁净室建造有关的初始运行和维护的具体要求。

GB 50096-2011住宅设计规范

为保障城镇居民的基本住房条件和功能质量，提高城镇住宅设计水平，使住宅设计满足安全、卫生、适用、经济等性能要求，制定本规范。本规范适用于城镇新建、改建和扩建住宅的建筑设计。住宅设计必须执行有关方针、政策和法规，遵守安全卫生、环境保护、节约用地、节约能源资源等有关规定。 住宅设计除应符合本规范外，尚应符合现行有关标准的规定。

GB/T 50155-2015供暖通风与空气调节术语标准

本标准适用于供暖通风与空气调节工程的设计、施工、验收、运行维护及科研、教学等。

CJJ/T 275-2018市政工程施工安全检查标准

本标准适用于市政工程施工安全生产的检查评定。

LD 35-1992制革安全卫生规程

本标准规定了制革行业安全卫生的要求和技术措施。t本标准适用于将原料皮经准备、鞣制、整理．加工为成品革的制革企业、车间和场所。

JGJ 39-2016托儿所、幼儿园建筑设计规范

本规范适用于新建、扩建、改建托儿所、幼儿园的建筑设计。

DIN 4548-2016工业钢存放和车间柜. 设计, 功能和安全要求, 试验和评估

This standard applies for steel storage and workshop cabinets commonly used in companies with sliding doors, swing doors, swivel doors, shutters, folding doors, and its accessories for normal use. These cabinets are used for storage, archivating and in workshops and consist of cabinet casing, front (.eg. doors, shutters), interior decoration (e. g. shelves, drawers), sub-construction and superstructure.

DIN 68871-2017家具.名称及其使用

This standard specifies designations for all kind of furniture und their use in goods traffic in case of exhibition, offer (e. g. advertisement) and selling.

DIN EN 16602-70-01-2015航天产品保证. 清洁和污染控制; 英文版本EN 16602-70-01-2014

The purpose of this standard is to define: ? The selection of critical items, the definition of cleanliness requirements to satisfy the mission performance requirements and control the levels to be met by personnel, items, facilities and operations of space projects.? The management, including organization, reviews and audits, acceptance status and documentation control.It covers design, development, production, testing, operation of space products, launch and mission.In this standard are also guidelines given for identification of possible failures and malfunctions due to contamination and guidelines for achieving and maintaining the required cleanliness levels during ground activities, launch and mission.This Standard applies to all types and combinations of projects, organizations and products, and during all the project phases, exceptmanned missions.It also applies to those ground systems that have a hardware interface to space systems, such as MGSE integration stands.This Standard does not address magnetic, electrical or electrostatic cleanliness.This Standard does not address completely biocontamination aspects. However, references to relevant ECSS standards are provided.This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.