音视和视听设备检测

音视和视听设备检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 6565-2015职业分类与代码

本标准规定了我国职业的分类结构、类别、代码及说明。本标准适用于按职业分类的各种普查、调查统计及行政管理和国内外信息交流等。

GB/T 9002-2017音频、视频和视听设备及系统词汇

本标准界定了音频、视频和视听设备及系统范围内基础和常用词汇的中英文名称及定义，但不包括信号传输方面的词汇。本标准适用于音频、视频和视听设备及系统范围内基础和常用词汇的中英文名称及定义，其他领域可参照使用。

GB/T 15466-2011应用电视术语

本标准规定了应用电视的术语和定义。本标准适用于应用电视系统和设备的科研、生产、教学和使用等有关领域。

GB/T 26270-2010数字电视接收设备标准测试信号

本标准规定了数字电视接收设备测试用的标准测试信号。本标准适用于我国地面、有线和卫星数字电视广播接收设备测试。数字电视投影显示器和投影机用的相应测试信号可参照执行。

GB/T 27936-2011出版物发行术语

本标准界定了出版物发行活动中的术语及其定义，包括出版物发行基础术语、主体术语、客体术语、交易术语、物流术语、信息术语和财务及管理术语。 本标准适用于出版物发行及相关领域。

GB/T 35784-2017视听设备 音频系统小损伤的主观评价方法

本标准规定了视听设备中音频系统的小损伤的主观评价方法。本标准适用于产生小损伤的音频系统的评价；其损伤足够小，不依赖对测试条件的严格限制和适当的统计分析不足以觉察。本标准不适用于较大且易觉察的损伤的音频系统，如果依据本标准将消耗较多时间和精力且得出的结果并不比简单测试更可信。

GB 50799-2012电子会议系统工程设计规范

本规范适用于电子会议系统工程的新建、扩建和改建的设计。

CY/T 50-2008出版术语

本标准规定了出版领域常用术语和定义。本标准适用于出版领域信息交换等工作。

SJ/T 11180.1-2016音频和视听设备 数字音频部分 音频特性基本测量方法 第1部分:总则

SJ/T 11180的本部分规定了消费者用、用和个人计算机用的音频和视听设备的数字音频部分的音频特性的基本测量方法。本部分规定的音频特性通用测量条件和方法适用于以数字形式处理音频信息，且音频带宽约为采样频率一半的系统，例如CD唱机、DAT录音机、数字放大器、数字声音广播接收机和带数字声的电视广播接收机等。本部分规定的测量方法适用于数字入/模拟出和模拟入/数字出的设备，其后的修订版本将包括数字入/数字出和模拟入/模拟出的测量。本部分不适用于有损压缩信号和功率放大器。

JGJ 310-2013教育建筑电气设计规范

本规范适用于新建、扩建和改建的各级各类学校校园电气总体设计及供教学活动所使用建筑物的电气设计。

JY/T 0381-2007数字语言学习系统

本标准规定了数字语言学习系统要求、试验方法、检验规则、标志、包装、运输、贮存等内容。本标准适用于教学和培训用数字语言学习系统，作为研究、设计、评价、生产、检验、使用、运输和贮存等方面应予共同遵守的技术依据。

ITU-T T.124-2007通用会议控制研究小组16

This Recommendation provides a high-level framework for conference management and control ofaudiographic and audiovisual terminals and Multipoint Control Units (MCUs). It encompassesGeneric Conference Control (GCC) functions such as conference establishment and termination,managing the roster of nodes participating in a conference, managing the roster of ApplicationProtocol Entities and Application Capabilities within a conference, registry services for use byApplication Protocol Entities, coordination of conference conductorship, as well as othermiscellaneous functions.This Recommendation is defined within the framework of [ITU-T T.120]. Included within thisframework are companion [ITU-T T.122] and [ITU-T T.125], which define the multipoint deliverymechanism used in this Recommendation, and [ITU-T T.123], which specifies the AudiovisualProtocol Stacks for each of the communication networks supported.Figure 1-1 presents an overview of the scope of this Recommendation and its relationship to theother elements of the T.120 framework within a single node.

DIN EN 62514-2011家用网络多媒体网关.导则(IEC 62514-2010);德文版本EN 62514-2010

The home network gateway device supports and realizes services in such fields as connecting between networks or devices, Audio/Video entertainments, communications, security, and home appliance controls. However, this specification focuses on home multimedia gateway devices, thus it is for media applications processed by gateway devices inside home.

BS EN 61606-1-2009音频和视听设备.数字音频部分.音频特性的基本测量方法.总则

This part of IEC 61606 is applicable to the basic methods of measurement of the audio characteristics of the digital audio part of audio and audiovisual equipment for all of consumer use, professional use and personal computer.The common measuring conditions and methods, described in this standard, are used for themeasurement of the performance characteristics of equipment having an audio bandwidth equal to approximately one-half of the sampling frequency of a system, where the audio information is processed in the form of digital data. CD players, DAT recorders, digital amplifiers, digital sound broadcast receivers and television broadcast receivers with digital sound are examples.This standard describes test methods for equipment which has digital input with analogue output and analogue input with digital output. Future revisions of this standard will cover digital-in/digital-out and analogue-in/analogue-out tests.This standard does not apply to a lossy compression signal and also does not apply to power amplifiers.NOTE 1 A digital audio system having an analogue input and an analogue output with digital signal processing may have different characteristics from those of a pure analogue audio system due to sampling of the audio signal and performance of incorporated A/D and D/A converters. Measurement methods described in IEC 60268-3 may not give correct results when applied to a digital system.NOTE 2 The methods described are mostly based on sampling frequencies of 32 kHz and higher.NOTE 3 For tests of those systems of digital-in – digital-out, and analogue-in – analogue-out tests, refer to AES17.NOTE 4 This standard is planned to harmonize with the first edition of IEC 61606 (1997)1, AES17 and EIAJ CP-2i50.

BS EN 61606-2-2009音频和视听设备.数字音频部分.音频特性的基本测量方法.用户使用

This part of IEC 61606 is applicable to the basic measurement methods of the audio characteristics of the digital audio part of audio and audiovisual equipment for consumer use. The common measuring conditions and methods are described in IEC 61606-1. This International Standard specify conditions and methods of measurement for consumer equipment are given in this standard.

BS EN 61606-3-2008音频和视听设备.数字音频部分.音频特性的基本测量方法.使用

This part of IEC 61606 is applicable to the basic measurement methods of audio equipmentfor professional use.The definitions, measuring conditions and methods common to both consumer andprofessional equipment are described in the IEC 61606-1.This standard contains details of definitions and measuring conditions and methods applicableto professional equipment which differ from those described in IEC 61606-1.This standard excludes consideration of− measurement of low-quality audio devices,− measurement of low-bit-rate audio devices (‘sub-band’ or ‘perceptual’ coding devices),− measurement of devices which significantly modify time or frequency characteristics of thesignal, such as pitch shifters or reverberators,− measurement of signals from analogue input to analogue output, beyond the most general,− EMC and safety related testing.

BS EN 61606-4-2006音频和视听设备.数字音频部件.音频特征的基本测量方法.第4部分:个人电脑

This part of IEC 61606 specifies the basic measurement methods of a linear PCM signal for an audio part of personal computers (PCs) and applies to both desktop and portable computers. The common measuring conditions and methods are described in IEC 61606-1.Specific conditions and methods of measurement for PCs are given in this standard.NOTE 1 The methods described are mostly based on sampling frequencies from 8 kHz to 192 kHz and bit lengthfrom 8 bit to 24 bit.NOTE 2 This standard describes tests for equipment which has digital input with analogue output and analogue input with digital output. Digital input data are provided from an internal HDD or other memory media and outputdigital data are recorded to an internal HDD or main memories.NOTE 3 The methods specified in this standard are not applicable to systems incorporating bit-rate reduced digital audio signals that have data loss or to 1-bit signals. This part does not apply to analogue input with analogue output and digital input with digital output as described in IEC 61606-1.NOTE 4 When a CPU in a PC is overloaded by tasks other than those for audio input/output, the PC may fail to record/reproduce the whole audio data. This standard applies only to the measurement in which input/output data are recorded/reproduced without such missing data. The performance of a PC with missing audio data may be evaluated by the short-term distortion measurement although such evaluation is not within the scope of this standard.

BS EN 62379-1-2007网络化数字音频和视频产品的通用控制接口.第1部分:总则

This part of IEC 62379 specifies a control interface for products which convey audio and/orvideo across digital networks.Separate documents specify items specific to a particular type of traffic, a particularnetworking technology, or a particular class of application.