膨润土干燥剂检测

GB/T 5005-2010钻井液材料规范

本标准规定了油气钻井液材料的性能和测试步骤。这些材料包括重晶石粉、赤铁矿粉、钻井级膨润土、未处理膨润土、OCMA级膨润土、凹凸棒石、海泡石、技术级低黏羧甲基纤维素、技术级高黏羧甲基纤维素、淀粉、低黏聚阴离子纤维素、高黏聚阴离子纤维素及钻井级生物聚合物。

GB/T 29170-2012石油天然气工业 钻井液 实验室测试

本标准规定了钻井液材料和钻井液的物理、化学、流变等性能的实验室测试方法。本标准适用于水基钻井液、油基钻井液以及其他基液或人工配制流体。本标准不适用于作为控制钻井液性能的详细手册。由于搅拌条件和测试温度对钻井液性能影响显著,本标准给出了推荐的搅拌条件和测试温度。

GB/T 29172-2012岩心分析方法

本标准规定了岩心的钻取、处理、保存及岩心分析的准备、测试方法、技术要求及编写报告的格式、本标准适用于在油气藏勘探、开发过程中,对钻井取心及井壁取心岩样的测试分析,其他岩心的分析亦应参照执行、

GB/T 36198-2018土壤质量 土壤气体采样指南

本标准给出了有关土壤气体的采样指南。本标准不适用于进入大气的土壤气体测定、大气气体采样或被动采样过程。

HB 7041-1994航空行业非金属材料代码

本标准规定了航空行业常用非金属材料的分类原则、编码方法和具体的分类与代码表。　　本标准适用于航空行业各企事业单位。

JC/T 2266-2014凹凸棒石粘土制品

本标准规定了凹凸棒石粘土制品的术语和定义、标记、分级和要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于以凹凸棒石粘土为原料,制得的吸附脱色剂、干燥剂、粘结剂、涂料用、填料用、宠物垫料用、凹凸棒石粘土复合助留剂、高粘凹凸棒石粘土、凹凸棒石废水处理吸附剂、提纯凹凸棒石、纳米凹凸棒石、凹凸棒石无机凝胶等12种凹凸棒石粘土加工产品。

JC/T 2269-2014膨润土干燥剂

本标准规定了膨润土干燥剂的要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于由天然膨润土加工制得的干燥剂。

JTS 237-2017水运工程地基基础试验检测技术规程

本规程适用于水运工程地基基础的试验和检测。

SY/T 0439-2012石油天然气工程建设基本术语

本标准适用于油田、气田、输油管道、输气管道、油库、储气库、液化天然气等工程设计。

SY/T 5336-2006岩心分析方法

这部分阐述设计一个取心程序的复杂性、决策制定及影响选择的因素。

EN ISO 10416-2009石油和天然气工业.钻探泥浆.实验室试验

This International Standard provides procedures for the laboratory testing of both drilling fluid materials and drilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-based drilling fluids, as well as the base or “make-up” fluid.

DIN EN ISO 10414-2-2011石油和天然气工业.钻井液的现场测试.第2部分:油基液(ISO 10414-2-2011);英文版本EN ISO 10414-2-2011,仅限CD-ROM

This part of ISO 10414 provides standard procedures for determining the following characteristics of oil-based drilling fluids:a) drilling fluid density (mud weight);b) viscosity and gel strength;c) filtration;d) oil, water and solids concentrations;e) alkalinity, chloride concentration and calcium concentration;f) electrical stability;g) lime and calcium concentrations, calcium chloride and sodium chloride concentrations;h) low-gravity solids and weighting material concentrations.The annexes provide additional test methods or examples that can optionally be used for the determination of:- shear strength (Annex A);- oil and water concentrations from cuttings (Annex B);- drilling fluid activity (Annex C);- aniline point (Annex D);- lime, salinity and solids concentration (Annex E);- sampling, inspection and rejection (Annex F);- rig-site sampling (Annex G);- cuttings activity (Annex H);- active sulphides (Annex I);- calibration and verification of glassware, thermometers, viscometers, retort kit cups and drilling fluid balances (Annex J);- permeability plugging apparatus with set-screw secured end cap (Annex K);- permeability plugging apparatus with threaded end cap (Annex L);- elastomer compatibility (Annex M);- sand content of oil-based fluid (Annex N);- identification and monitoring of weight-material sag (Annex O);- oil-based drilling fluid test report form (Annex P).

DIN EN ISO 10416-2010石油和天然气工业.钻井液.实验室试验

This International Standard provides procedures for the laboratory testing of both drilling fluid materials and drilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-based drilling fluids, as well as the base or make-up fluid.

DIN EN ISO 13500-2011石油和天然气工业.钻井液材料.规范和试验(ISO 13500-2008 + AMD 1-2010);英文版本EN ISO 13500-2008 + A1-2010,仅在CD-ROM上

This International Standard covers physical properties and test procedures for materials manufactured for use in oil-and gas-wel drilling fluids.

DIN EN ISO 13501-2011石油和天然气工业.钻井液.工艺设备的评定(ISO 13501-2011);英文版本EN ISO 13501-2011

This International Standard provides a standard procedure for assessing and modifying performance of solids control equipment systems commonly used in the field in petroleum and natural gas drilling fluids processing.

BS EN 14415-2004土工合成物隔层.耐浸出性测定的试验方法

This European Standard describes a method of testing the resistance to leaching of polymeric or bituminous geosynthetic barriers, and the polymeric component of geosynthetic clay barriers, in hot water (method A), aqueous alkaline liquids (method B) and organic alcohols (method C).

BS EN ISO 10414-2-2011石油和天然气工业.钻井液的现场测试.油基液

This part of ISO 10414 provides standard procedures for determining the following characteristics of oil-baseddrilling fluids:a) drilling fluid density (mud weight);b) viscosity and gel strength;c) filtration;d) oil, water and solids concentrations;e) alkalinity, chloride concentration and calcium concentration;f) electrical stability;g) lime and calcium concentrations, calcium chloride and sodium chloride concentrations;h) low-gravity solids and weighting material concentrations.The annexes provide additional test methods or examples that can optionally be used for the determination of:- shear strength (Annex A);- oil and water concentrations from cuttings (Annex B);- drilling fluid activity (Annex C);- aniline point (Annex D);- lime, salinity and solids concentration (Annex E);- sampling, inspection and rejection (Annex F);- rig-site sampling (Annex G);- cuttings activity (Annex H);- active sulphides (Annex I);- calibration and verification of glassware, thermometers, viscometers, retort kit cups and drilling fluidbalances (Annex J);- permeability plugging apparatus with set-screw secured end cap (Annex K);- permeability plugging apparatus with threaded end cap (Annex L);- elastomer compatibility (Annex M);- sand content of oil-based fluid (Annex N);- identification and monitoring of weight-material sag (Annex O);- oil-based drilling fluid test report form (Annex P).

BS EN ISO 10416-2009石油和天然气工业.钻探泥浆.实验室试验

This International Standard provides procedures for the laboratory testing of both drilling fluid materials anddrilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-baseddrilling fluids, as well as the base or “make-up” fluid.It is not applicable as a detailed manual on drilling fluid control procedures. Recommendations regardingagitation and testing temperature are presented because the agitation history and temperature have aprofound effect on drilling fluid properties.