黑色和热浸镀锌焊接无缝钢管检测
GB/T 2314-2008电力金具通用技术条件
本标准规定了架空电力线路、变电站及电厂配电装置用电力金具（以下简称金具）在设计、制造及安装使用等方面的通用技术条件。本标准适用于额定电压在35kV以上架空电力线路、变电站及电厂配电装置用的金具。对在严重腐蚀、污秽的环境、高海拔地区、高寒地区等条件下使用的金具尚应满足其他相关标准的有关规定。
GB/T 8162-2018结构用无缝钢管
本标准规定了结构用无缝钢管的订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。本标准适用于机械结构和一般工程结构用无缝钢管。
GB/T 8163-2018输送流体用无缝钢管
本标准规定了输送流体用无缝钢管的订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。本标准适用于输送普通流体用无缝钢管。
GB/T 31235-2014±800kV直流输电线路金具技术规范
本标准规定了±800 kV直流架空输电线路导线配套金具的一般技术要求、设计与制造、连接与紧固、检验与试验、标志与包装等。本标准适用于±800 kV直流架空输电线路导线用配套金具。
GB 50974-2014消防给水及消火栓系统技术规范
本规范适用于新建、扩建、改建的工业、民用、市政等建设工程的消防给水及消火栓系统的设计、施工、验收和维护管理。
DL 5009.1-2014电力建设安全工作规程.第1部分:火力发电
本部分适用于新建、扩建和改建的火力发电工程建设项目(含核电站常规岛)建筑、安装、调试等安全生产工作。
UL SUBJECT 213B-2010SUBJECT 213B 防火系统中使用的焊式出口管接头调查大纲发布号:5
Addition of references to Paragraphs 6.2 and 6.3 for otheracceptable pipe threads for threaded fittingsAddition of references to new Paragraph 8.5 to specify the weldmethod and pipe preparation as specified in NFPA 13 whenfabricating test samplesClarification of requirements for the Leakage and HydrostaticTests in Sections 9 and 10 respectivelyAddition of the Bending Moment Test, Section 11, when the outletpipe wall thickness is less than the wall thickness of the run pipeRemoval of the Metallic Material Test and replacing the testingrequirements with the material specification compliance in MetallicMaterial, Section 7
UL SUBJECT 327-2011防火系统的涡轮型流量计的调查大纲
1.1 These requirements cover the construction and performance of turbine type water flowmeters for fireprotection service of Type I, Type II or Type III construction.1.2 The following items are outside the scope of these requirements:a) Materials and construction of the register;b) Evaluation of the by-pass components, including the by-pass meter if provided, except forbody leakage and strength of body;c) Potability and;d) Stationary static gaskets, such as cover gaskets and ring gaskets used between flanges.
ASTM A733-2003焊接及无缝碳素钢和奥氏体不锈钢管接头标准规范
1.1 This specification covers the requirements for welded and seamless carbon steel pipe nipples, black and zinc-coated (hot-dip galvanized), and welded and seamless austenitic stainless steel pipe nipples in standard steel pipe sizes from 1/8to 12 in. inclusive, in standard or special lengths. 1.1.1 Welded Carbon Steel8212;Pipe nipples ordered under these requirements are intended for general uses, as described by Specification A 53. 1.1.2 Seamless Carbon Steel8212;Pipe nipples ordered under these requirements are intended for general and special uses, as described by the applicable Specifications A 53 and A 106 (see 4.1.1). 1.1.3 Austenitic Stainless Steel8212;Pipe nipples ordered under these requirements are intended for high-temperature and general corrosion service, as described by Specification A 312 (see 4.1.2 ). 1.1.4 The text for this specification contains notes and/or footnotes that provide explanatory material. Such notes and footnotes, excluding those in tables, do not contain any mandatory language.
ASTM A795-2000防火用黑色及热浸镀锌的焊接和无缝钢管的标准规范
1.1 This specification covers black and hot-dipped galvanized welded and seamless steel pipe in sizes NPS 1/2 (Note 1) to NPS 10 inclusive, with wall thicknesses as given in Table 1 and Table 2. Pipe having other wall thicknesses may be furnished provided such pipe complies with all other requirements of this specification and the outside diameter is as given in Table 2. Pipe ordered under this specification is intended for use in fire protection systems. The pipe may be bent, but it is not intended for bending made at ambient temperature wherein the inside diameter of the bend is less than twelve times the outside diameter of the pipe being bent (Note 2). Note 1--The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as "nominal diameter," "size," and "nominal size." Note 2--Successful bending of pipe is a function of equipment and technique as well as pipe properties. 1.2 This pipe is suitable for joining by the following methods: 1.2.1 Light-Weight Fire Protection Pipe-- Rolled groove, welding, and fittings for plain end pipe. See Table 1 for dimensions. 1.2.2 Standard-Weight Fire Protection Pipe-- Cut or rolled groove, threading, welding, and fittings for plain end pipe. See Table 2 for dimensions. 1.2.3 For pipe having dimensions other than those of Table 1 and Table 2, the joining method must be compatible with the pipe dimensions. A complete listing of standard light weight dimensions appears in ASME B36.10 and B36.19. 1.3 The following precautionary caveat pertains only to the test method portion, Sections 8, 9, and 10, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 The values stated in inch-pound units are to be regarded as the standard. The SI equivalents may be approximate.
