非合金及细晶粒结构钢的冷成型焊接结构空心型材检测
ISO 10799-1-2011非合金及细晶粒结构钢的冷成型焊接结构空心型材.第1部分:技术交货条件
This part of ISO 10799 specifies the technical deliverynrequirements for cold-formed welded structural hollow sections ofncircular, square or rectangular form. It is applicable tonstructural hollow sections formed cold without subsequent heatntreatment.nThe grades, chemical composition and mechanical properties fornnon-alloy steels and fine grain steels are given in Annexes A andnB, respectively.nNOTE 1 For the requirements for tolerances, dimensions andnsectional properties, see ISO 10799-2.nNOTE 2 For hot finished structural hollow sections, see ISOn12633-1.
DIN EN 1993-1-2-2010欧洲规范3:钢结构设计.第1-2部分:一般规则.结构防火设计;德文版本EN 1993-1-2-2005 + AC-2009
EN 1993 spplies to the design of buildings and civil engineering works in steel. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990-Basis of structural design.
DIN EN 1993-1-10-2010欧洲规范3:钢结构设计.第1-10部分:材料韧性和贯穿厚度特性;德文版本EN 1993-1-10-2005 + AC-2009
EN 1993-1-10 contains design rules for selecting and specifying steel materials that are resistant to failure by brittle fracture and lamellar tearing.
DIN EN 1994-1-1-2010欧洲法规4:复合钢和混凝土结构的设计.第1-1部分:一般规则和建筑物规则.德文版本EN 1994-1-1-2004 + AC-2009
Eurocode 4 applies to the design of composite structures and members for buildings and civil engineering works. It complies with the principles and requirements for the safety and serviceabiltiy of structures, the basis of their design and verification that are given in EN 1990 - Basis of structural design.
DIN EN 1994-1-2-2010欧洲规范4:复合钢和混凝土结构的设计.第1-2部分:一般规则.结构防火设计;德文版本EN 1994-1-2-2005 + AC-2008
This part 1-2 of EN 1994 deals with the design of composite steel and concrete structures for the accidental situation of fire exposure and is intended to be used in conjunction with EN 1994-1-1 and EN 1991-2-2. This Part 1-2 only identifies differences from, or supplements to, normal temperature design.
DIN EN 1994-2-2010欧洲法规4:复合钢和混凝土结构的设计.第2部分:通用规则和桥用规则.德文版本EN 1994-2-2005 + AC-2008
Eurocode 4 applies to the design of composite structures and members for buildings and civil engineering works. It complies with the principles and requirements for the safety and serviceability of strucures, the basis of their design and verification that are given in EN 1990: 2002 - Basis of structural design.
DIN EN 10210-1-2006非合金结构钢和细晶结构钢热成型空心型件.第1部分:交货技术要求
The project covers hot finished structural hollow sections in thicknesses up to and including 65 mm of circular, square or rectangular form and applies to hollow sections formed hot with or without subsequent heat treatment or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot formed product.#,,#
DIN EN 10219-1-2006非合金钢和细晶粒钢的冷成形焊接空心结构型材.第1部分:交货技术要求
This part of this European Standard specifies the technical delivery requirements for cold formed welded structural hollow sections of circular, square or rectangular form and applies to structural hollow sections formed cold without subsequent heat treatment.#,,#
DIN EN 14199-2015特殊岩土工程施工.微型桩;德文版本EN 14199-2015
This standard establishes general principles for execution of piles: - which have a small diameter (smaller than 300 mm outside diameter for bored piles and smaller than 150 mm for displacement piles); - and which can be typically installed by means of small rigs.
BS EN 10210-1-2006非合金和细晶结构钢的热精加工空心型材.交货技术要求
This revision permits the publication of BS EN 10210-1 to be adopted as a Harmonised Standard under the Constuction Products Directive (CPD) 89/106/EC - Structural metallic products. Work on the Standard has been undertaken with the guidance of the CEN
BS EN 10219-1-2006非合金和细晶结构钢的冷成形焊接结构空心型材.交货技术要求
This revision permits the publication of BS EN 10219-1 be adopted as a Harmonised Standard under the Constuction Products Directive (CPD) 89/106/EC - Structural metallic products. Work on the Standard has been undertaken with the guidance of the CEN Con
