便携式移动电源产品检测

发布时间：2024-06-21 作者：中析研究所浏览：

GB/T 9813.2-2016计算机通用规范第2部分:便携式微型计算机

GB/T 9813的本部分规定了便携式微型计算机（以下简称：产品）的技术要求、试验方法、质量评定程序及标志、包装、运输和贮存等。本部分适用于产品的设计和制造。本部分是制定产品标准的依据。

GB/T 31023-2014移动实验室设备工况测试通用技术规范

本标准规定了设备工况测试移动实验室的术语和定义、分类和代号、要求、试验方法、检验规则、标志、包装、运输及贮存。本标准适用于各种陆路使用的机械设备在工况条件下进行检测的移动实验室。

GB 31241-2022便携式电子产品用锂离子电池和电池组安全技术规范

本文件规定了便携式电子产品用锂离子电池和电池组的安全要求和试验方法。本文件适用于便携式电子产品用的锂离子电池和电池组(以下简称为电池和电池组)，属于本文件范围内的便携式电子产品示例如下：a)　便携式办公产品：笔记本电脑、平板电脑等；b)　移动通信产品：手机、无绳电话、对讲机等；c)　便携式音/视频产品：便携式电视机、便携式音/视频播放器、照相机、摄像机、录音笔、蓝牙耳机、便携式音箱等；d)　其他便携式产品：电子导航器、数码相框、游戏机、电子书、移动电源、便携式储能电源、便携式投影仪、可穿戴设备等。与上述示例类似用途的锂离子电池和电池组可参考使用本文件。对于在车辆、船舶、飞机上等特定场合使用，以及对于医疗、采矿、海底作业等特殊领域使用的便携式电子产品用锂离子电池或电池组可能会有附加要求。本文件不适用于电子烟用锂离子电池和电池组。

GB/T 35590-2017信息技术便携式数字设备用移动电源通用规范

本标准规定了便携式数字设备用移动电源(以下简称“移动电源”)的要求、试验方法、质量评定程序以及标志、包装、运输和贮存。本标准适用于便携式数字设备用的输入电压不大于250 V，输出直流电压不大于60 V，单端口输出电流不大于5 A，采用有线输出方式的移动电源。

GB/T 36095-2018信息技术学习、教育和培训电子书包终端规范

本标准规定了电子书包终端的技术要求、试验方法、质量评定程序、标志、包装、运输和贮存的要求。本标准适用于各种类型的电子书包终端的设计、制造、测试和验收。

CJJ 207-2013城镇供水管网运行、维护及安全技术规程

本规程适用于城镇供水管网、总表后的埋地管网、自备水源的供水管网和农村集中式供水管网的运行、维护及安全技术管理。

YD/T 2960-2015移动互联网术语

本标准规范了移动互联网领域的术语和定义。本标准适用于移动互联网领域。

DL/T 1033.10-2016电力行业词汇第10部分:电力设备

本部分规定了电力设备的名词词汇。本部分适用于电力行业工作人员、高等院校师生在对外交流、定货、签订合同、设备验收和学术交流时使用。

UL 399-2008饮用水冷却器

1.1 These requirements cover self-contained drinking-water coolers which employ hermetic refrigerantmotor-compressors and which are designed for connection to alternating-current circuits rated not greaterthan 600 volts in accordance with the National Electrical Code, NFPA 70. The requirements also apply towater coolers which supply both hot and cold water.1.2 These requirements do not include additional requirements applicable to equipment designed for usein hazardous locations as defined in the National Electrical Code, NFPA 70.1.3 A product that contains features, characteristics, components, materials, or systems new or differentfrom those covered by the requirements in this standard, and that involves a risk of fire, electric shock, orinjury to persons shall be evaluated using the appropriate additional component and end-productrequirements as determined necessary to maintain the acceptable level of safety as originally anticipatedby the intent of this standard. A product whose features, characteristics, components, materials, orsystems conflict with specific requirements or provisions of this standard cannot be judged to comply withthis standard. Where considered appropriate, revision of requirements shall be proposed and adopted inconformance with the methods employed for development, revision, and implementation of this standard.

BS EN 13534-2006+A1-2010食品加工机械.食品加工填料机.安全性和卫生要求

1.1 This standard applies for curing injection machines with infeed and outfeed devices; curing injection machines with infeed and outfeed devices and loading devices.This standard does not apply to portable/hand guided curing injection devices.!deleted text"This document deals with all significant hazards, hazardous situations and events relevant to curing injectionmachinery when they are used as intended and under conditions of misuse which are reasonably foreseeableby the manufacturer (see Clause 4).This document is not applicable to curing injection machines which are manufactured before the date ofpublication of this document by CEN.1.2 This standard covers the following types of curing injection machines:Curing injection machines consist mainly of a single or multilane curing needle station, holding down clamp,infeed and outfeed devices, machine frame and related drive system, and electrical, electronic, or pneumaticcomponents, depending on machine type.Curing injection machines in the scope of this standard can be equipped with: infeed chute; splash guard flaps; single or multi-lane curing needle bars (needle station); holding down clamp; infeed and outfeed conveyor belt; infeed and outfeed rake; interlocked transport car at the outfeed side; loading device with delivery chute.The product being processed (raw meat, game or raw fish) is fed by hand to the infeed device of the curinginjection machine. The infeed device transports the product to the needle station; the product is then pressedagainst the infeed device by a holding down clamp. The needles of the needle station inject the curing liquid orother fluids into the product. The outfeed device then transports the product away from the needle station.This standard also covers the loading devices, which can be necessary in the case of machines with highcapacity and/or great height.Curing injection machines in the scope of this standard can be stationary or mobile.1.2.1 Curing injection machines with single or multi-lane curing needle bars, infeed and outfeed device atthe infeed and outfeed side (see Figure 1).The distance A between the floor/ standing position and the infeed surface of the infeed and outfeed device is> 750 mm.