绿松石 鉴定检测

GB/T 9649.9-2009地质矿产术语分类代码.第9部分:结晶学及矿物学

本部分规定了矿物的成因、形态、物理性质（侧重肉眼鉴定方面）、化学成分、矿物分类和名称及晶体发生学、几何结晶学等结晶学及矿物学方面的数据分类与代码。本部分适用于各类地质矿产信息系统建设，是确定数据库标准体系和数据字典，制定各类地质数据文件格式标准的基础标准。

GB/T 16552-2017珠宝玉石 名称

本标准规定了珠宝玉石的术语和定义、定名规则和表示方法。本标准适用于珠宝玉石定名。

GB/T 16553-2017珠宝玉石 鉴定

本标准规定了珠宝玉石的术语和定义、鉴定方法和项目选择及鉴定特征。本标准适用于珠宝玉石鉴定。

GB/T 25071-2010珠宝玉石及贵金属产品分类与代码

本标准规定了珠宝玉石及贵金属产品的材质和品种的分类及代码。本标准适用于珠宝玉石及贵金属产品的信息处理与信息交换。

GB/T 36168-2018绿松石 鉴定

本标准规定了天然和经优化处理绿松石的鉴定特征及鉴定方法。本标准适用于绿松石鉴定。

GB/T 36169-2018绿松石 分级

本标准规定了天然或优化的未镶嵌抛光绿松石的术语和定义，绿松石颜色、质地、表面洁净度的分级规则，绿松石透明度、光泽、花纹的描述，绿松石分级要求、质量计量和分级证书。本标准适用于天然或优化的未镶嵌抛光绿松石的分级，镶嵌抛光绿松石可参照使用。

EN ISO 10416-2009石油和天然气工业.钻探泥浆.实验室试验

This International Standard provides procedures for the laboratory testing of both drilling fluid materials and drilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-based drilling fluids, as well as the base or “make-up” fluid.

DIN EN ISO 10416-2010石油和天然气工业.钻井液.实验室试验

This International Standard provides procedures for the laboratory testing of both drilling fluid materials and drilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-based drilling fluids, as well as the base or make-up fluid.

DIN EN ISO 21871-2006食品和动物饲料的微生物学.少量推定的蜡样芽胞杆菌测定的水平法.大可能数技术和检测方法

This International Standard specifies a horizontal method for the detection or the enumeration of Iow numbersof viable presumptive Bacillus cereus by means of the most probable number technique. This InternationalStandard is applicable to products intended for human consumption and the feeding of animals, and-- environmental samples in the area of food production and food handling.

BS 6739-2009过程控制系统仪表的实施规范:安装设计和实施

This British Standard gives recommendations for, and guidance on,the design for the installation of instrumentation of measurementand control systems in the process industry, and the implementationand commissioning of this installation. It is intended to be used asa manual of good practice on the site and also to assist those whodesign the installation.

BS EN ISO 10414-1-2008石油和天然气工业.钻井泥浆的现场测试.第1部分:水基泥浆

This part of ISO 10414 provides standard procedures for determining the following characteristics ofwater-based drilling fluids:a) drilling fluid density (mud weight);b) viscosity and gel strength;c) filtration;d) water, oil and solids contents;e) sand content;f) methylene blue capacity;g) pH;h) alkalinity and lime content;i) chloride content;j) total hardness as calcium.Annexes A through K provide additional test methods which may be used for- chemical analysis for calcium, magnesium, calcium sulfate, sulfide, carbonate and potassium;- determination of shear strength;- determination of resistivity;- removal of air;- drill-pipe corrosion monitoring;- sampling, inspection and rejection;- rig-site sampling;- calibration and verification of glassware, thermometers, viscometers, retort-kit cup and drilling-fluidbalances;- permeability-plugging testing at high temperature and high pressure for two types of equipment;- example of a report form for water-based drilling fluid.

BS EN ISO 10416-2009石油和天然气工业.钻探泥浆.实验室试验

This International Standard provides procedures for the laboratory testing of both drilling fluid materials anddrilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-baseddrilling fluids, as well as the base or “make-up” fluid.It is not applicable as a detailed manual on drilling fluid control procedures. Recommendations regardingagitation and testing temperature are presented because the agitation history and temperature have aprofound effect on drilling fluid properties.