家用家具座椅检测

发布时间：2024-06-21 作者：中析研究所浏览：

SN/T 4038-2014进出口木制品、家具通用技术要求

本标准规定了进出口木制品、家具的技术要求、试验方法，并给出了部分或地区的安全要求。本标准适用于以木制品和家具。

TS EN 1022-2008家用家具. 座椅. 稳定性的测定

This standard specifies test methods and requirements for the determination of the stability of all types of domestic seating for adults. This standard does not apply to adjustable geometry seating where the backrest is at an angle of 100 or less to the horizontal Stability can be determined by either the experimental or the calculative method. Both methods are based on the same forces and points of application The calculative method does not apply to seating, which have variable geometry and to seating, which visibly flex under the applied loads. If the result of the calculative method is uncertain or marginal the result shall be checked, if possible, by the experimental method.

TS EN 1728-2015家用家具. 座椅. 测定强度和耐用性的试验方法

This European Standard specifies test methods for the determination of strength and durability of the structure of all types of seating without regard to use, materials, design/construction or manufacturing process. This European Standard does not apply to children?s highchairs, table mounted chairs and bath seats which are covered by other European Standards. Test methods for the assessment of ageing, degradation, ergonomics and electrical functions are not included.

DIN 68878-2011对家用椅子性能特性的要求和试验方法

This standard applies to chairs in the domestic area which are not fixed to the floor. It does not apply to children's high chairs, folding chairs and chairs for exterior use. This standard determines functional dimensions and requirements on performance and test methods.

DIN 68888-2009家具.座椅.家具装饰品耐久性的测定

This standrad specifies a test method for the determination of durability of upholstery complete and on the seating.

DIN EN 581-2-2017室外家具.野营区、住宅区和商业区用桌椅.第2部分:接卸安全要求座椅测试方法;德文版本EN 581-2-2015+AC-2016

This European Standard specifies the minimum requirements for the safety, strength and durability of all types of outdoor seating for adults, without regard to materials, design/construction or manufacturing processes. It does not apply to street furniture. It does not apply to removable upholstery and covering. It does not include requirements for the durability of castors/wheels and height adjustment mechanisms. It does not include requirements for electrical safety. It does not include requirements for the resistance to ageing and degradation caused by light, temperature and moisture. The test requirements contained within this standard are based on use by persons weighing up to 110 kg.

DIN EN 12520-2016家具.强度,耐久性和安全.家用座椅的要求.德文版本EN 12520-2015

This European Standard specifies the minimum requirements for the safety, strength and durability of all types of domestic seating for adults. It does not apply to ranked seating, seating for non-domestic use, office work chairs, office visitors chairs, chairs for educational institutions, outdoor seating and to links for linked seating for which European Standards exist. It does not include requirements for the durability of upholstery materials, castors, reclining and tilting mechanisms and seat height adjustment mechanisms. It does not include requirements for electrical safety. It does not include requirements for the resistance to ageing, degradation, flammability and ergonomics. The tests are based on use by persons weighing up to 110 kg.

DIN EN ISO 5999-2013软质多孔聚合材料. 不包括地毯底衬的过载设施用聚氨酯泡沫塑料. 规范 (ISO 5999-2013); 德文版本EN ISO 5999-2013

This International Standard specifies requirements for flexible load-bearing polyurethane foam of the polyether type. It is applicable to flexible polyurethane cellular materials manufactured in block, sheet and strip form, in moulded and fabricated shapes, and as reconstituted material, used for load-bearing applications in general, but excluding carpet backing and underlay. It thus primarily relates to the quality of polyurethane foam used for comfort cushioning purposes. The foam is classified according to performance during a fatigue test, indentation hardness index being used as a secondary means of grading material. This International Standard is not applicable to polyurethane foams foamed in place or to foams for use in heat-welded systems unless for load-bearing purposes.

DS/EN 1022-2007家用家具.座椅.稳定性的测定

This European Standard specifies test methods and requirements for the determination of the stability of all types of domestic seating for adults. The European Standard does not apply to adjustable geometry seating where the backrest is at an angle of 10º or less to the horizontal.Stability can be determined by either the experimental or the calculative method. Both methods are based on the same forces and points of application. The calculative method does not apply to seating, which have variable geometry and to seating, which visibly flex under the applied loads.If the result of the calculative method is uncertain or marginal the result shall be checked,

BS 5459-2-2000+A2-2008办公家具性能要求和试验规范.体重在150kg以下人员每天使用时间小于24小时的办公室支架座椅并包括单个部件类型的验收试验

This part of BS 5459 specifies performance requirements and test methods for the structural safety andstability of office pedestal seating when used by persons weighing up to 150 kg, or when used for upto 24 hours a day, including chairs for use with tables and desks higher than those specified in BS EN 527-1.This Part of BS 5459 also specifies requirements and test methods for type approval of bases, columns, seatactions, back stems and locking devices.NOTE 1 BS EN 1335-2 and BS EN 1335-3 contain requirements and test methods for office pedestal seating which is intended for use forup to 8 hours a day by persons weighing up to 110 kg.This standard does not apply to office visitors' chairs.NOTE 2 Office visitors' chairs are chairs used in the office environment which are not classed as office work chairs and which are usedfor long or short meetings or consultations, as well as for reading, writing, listening and waiting.