短距离设备; 25MHz至1000MHz频率范围的无线电设备; 工作在指定频段的低占空比高可靠性警报设备检测

发布时间：2024-06-21 作者：中析研究所浏览：

GB/T 15629.15-2010信息技术系统间远程通信和信息交换局域网和城域网特定要求第15部分：低速无线个域网（WPAN）媒体访问控制和物理层规范

GB/T 15629的本部分规定了低速无线个域网的物理层和媒体访问控制层的规范。这种低速无线接入适用于固定的、便携的、移动的设备，这些设备不用电池或仅用非常有限的电池电源，并主要工作在有限的个人空间（0m-10m）。本部分不具体规定密码算法，密码算法的具体信息与密码管理局联系。本部分中提及的密码算法仅作为示例。

GB/T 29261.4-2012信息技术自动识别和数据采集技术词汇第4部分：无线电通信

GB/T 29261的本部分规定了自动识别和数据采集技术领域中无线电通信的专用术语和定义。本部分适用于无线电通信领域非用户与专家进行交流。

GB/Z 36442.1-2018信息技术用于物品管理的射频识别实现指南第1部分:无源超高频RFID标签

GB/Z 36442的本部分给出了无源超高频RFID标签(以下简称“RFID标签”)的选择以及媒体、黏合剂、表面层、油墨选择的指南；描述了减轻静电放电以减轻RFID标签损伤的技术。本部分给出了在可搬运的箱子和集装箱、托盘/单元货载物品及不可搬运的物品和不能用托盘装运的物品上安置和附着RFID标签的指南。本部分为用于物流应用中的RFID标签及其包装提供了指导。

YD/T 2653-2013短距离及类似设备电磁照射符合性要求(10Hz ~30MHz)

本标准规定了短距离设备及类似设备的电磁照射的符合性要求。本标准适用于短距离设备及类似应用的无线设备。频率范围为10Hz至30MHz。类似产品例如无线电源设备、近场通信设备、射频识别设备等可以参照本标准。

ITU-R M.1453-2-2005智能传输系统—5.8GHz专用小范围通信

Recommendation ITU-R M.1453 – Transport information and control systems – Dedicated short range communications at 5.8 GHz, was approved at the Radiocommunication Assembly (RA) 2000. In August 2002, the RA approved a revision of the Recommendation as Recom

ITU-R REPORT SM.2057-2005使用超宽带技术设备影响无线电通信业务的相关研究

This Report considers interferences from devices using ultra-wideband (UWB) technology on radiocommunication services. As a main objective, it evaluates UWB e.i.r.p. density required for the protection of radiocommunication services.This Report also includes laboratory and field measurements on the impact of devices using UWB technology on radiocommunication services.

ITU-R SM.1756-2006使用超宽带技术设备的介绍的结构问题ITU-R 226/1

Taking into account that there are two general measurement approaches (time domain and frequencydomain) this Recommendation gives the appropriate techniques to be applied when measuring UWBtransmissions.

EN 54-25-2008火灾探测和火警系统.第25部分:无线电连接件用组件

This European Standard specifies requirements, test methods and performance criteria for components used in fire alarms systems, installed in and around buildings, which use radio frequency links (RF links) to communicate. It also provides requirements forThe evaluation of conformity of the components toThe requirements of this European Standard. Where components work together andThis requires knowledge of the system design,This document also specifies requirements onThe system. WhenThe fire detection and fire alarm systems (FDAS) use wired and RF links,The relevant parts of EN 54 apply together withThis document. Requirements relevant to wire links are superseded or modified by those included inThis European Standard.This document does not restrict:the intended use of radio spectrum, e. g. frequency, power output of devices;The allowed maximum number of the components using RF links withinThe FDAS or one transmission path and/or RF link;The allowed maximum number of the components affected by loss of one transmission path and/or RF link.These requirements relate to national regulations and can vary from member state to member state.