研磨抛光机器人检测

研磨抛光机器人检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 21412.3-2009石油天然气工业.水下生产系统的设计与操作.第3部分:过出油管(TFL)系统

GB/T 21412的本部分规定了过出油管(TFL)系统及设备的设计、制造和操作要求，并给出了相应的推荐做法。 本部分涉及的程序和要求适用于井下设备、水下采油树及油管挂、出油管(包括管线内设备)的液压作业。 本部分主要阐述了TFL系统在海上及水下的应用，同时它也可用于其他场合，如大斜度井和水平井。 本部分不涉及水下分离、增压、计量和井下泵送的相关内容。

GB/T 21412.4-2013石油天然气工业 水下生产系统的设计与操作 第4部分:水下井口装置和采油树设备

GB/T 21412的本部分规定了水下井口装置、泥线井口装置、钻通泥线井口装置以及水下立式和卧式采油树规范,以及设备搬运、试验和安装所需的相关工具。还规定了独立的分总成(用来建造完整的水下采油树总成)和完整的水下采油树总成的设计、材料、焊接、质量控制(包括工厂验收试验)、标志、贮存和运输。用户有责任确保水下设备满足其安装地所属政府法规的任何附加要求。这不在本部分的范围之内。当适用时,本部分也可应用于卫星井、丛式井和用于基盘式的多层完井等方面的设备。本部分适用于下列设备:a)水下采油树--采油树连接装置和油管悬挂器;--阀、阀组和阀驱动器;--节流阀和节流阀驱动器;--排放阀、测试阀和隔离阀;--TFLY形四通;--再入接口;--采油树帽;--采油树管路;--采油树导向架;--采油树送人工具;--采油树帽送入工具;--采油树安装的出油管线或控制管缆连接装置;--油管头和油管头连接装置;--出油管线底座和送入回收工具;--采油树安装的控制装置接口(仪器、传感器、液压管或管配件、电气控制装置电缆和附件);b)水下井口装置--导管头;--井口头;--套管悬挂器;--密封总成;--导向基座;--孔保护装置和耐磨衬套;--防腐帽;c)泥线悬挂系统--井口装置;--送入工具;--套管悬挂器;--套管悬挂器送入工具;--水下完井回接工具;--泥线井口装置水下完井异径连接装置;--油管头;--防腐帽;d)钻通泥线悬挂系统--导管头;--表层套管悬挂器;--井口头;--套管悬挂器;--环空密封总成;--孔保护装置和耐磨衬套;

GB/T 39407-2020研磨抛光机器人系统 通用技术条件

本标准规定了研磨抛光机器人系统的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存等。本标准适用于一般的物理性研磨抛光机器人系统。

WJ 2675-2005兵器产品CAPP工艺设计用基本术语.机械类

本标准定义了兵器产品CAPP工艺设计机械类术语。本标准适用于机械类兵器产品使用CAPP系统进行的工艺设计。

T/CECS 10297-2023建筑机器人 地坪研磨机器人

本文件规定了建筑地坪研磨机器人的标记、要求，描述了相应的试验方法，规定了检验规则，以及随行文件、标志、包装、运输与贮存等方面的内容。本文件适用于以混凝土地面为基层的研磨以及面层抛光等地坪工程施工的地坪研磨机器人的制造和检验。

DIN EN 62047-1-2016半导体装置.微型机电装置.第1部分:术语和定义(IEC 62047-1-2016).德文版本EN 62047-1-2016

This part of DIN EN 62047 defines terms for micro-electromechanical devices including the process of production of such devices.

DIN EN ISO 11148-8-2012非电动手持工具.安全要求.第8部分:檀木和磨光器

This standard applies to nonelectric, handheld power tools intended to be used in operation by one person using one or both hands, where the weight of the power tools is supported by the operator or by a harness or suspended e. g. by a balancer. The power tools are driven by rotary or linear motors powered by compressed air, hydraulic fluid, gaseous or liquid fuel or stored energy (e. g. by a spring). Electrically driven tools are not included. The standard lists the significant hazards caused by handheld power tools.

DIN EN ISO 12679-2015热喷涂.热喷涂用建议(ISO 12679-2011);德文版本EN ISO 12679-2015

The standard contains general rules for a professional production of metallic, metall-ceramic, oxid-ceramic and synthetic material coatings on metallic and non-metallic substrate materials applied by thermal spraying.

DIN EN ISO 16089-2016机床.安全性.固定式磨床(ISO 16089-2015).德文版本EN ISO 16089-2015

This EN ISO Standard specifies the requirements and/or measures to eliminate the hazards or reduce the risks in the following groups of stationary grinding machines which are designed primarily to shape metal by grinding: Group 1: Manually controlled grinding machines without power operated axes and without numerical control Group 2: Manually controlled grinding machines with power operated axes and limited numerically controlled capability, if applicable Group 3: Numerically controlled grinding machines NOTE 1 For detailed information on the groups of grinding machines, see the definitions in 3.1 and 3.4. NOTE 2 Requirements in this EN ISO Standard are, in general, applicable to all groups of grinding machines. If requirements are applicable to some special group(s) of grinding machines only, then the special group(s) of grinding machine(s) is/are specified. NOTE 3 Hazards arising from other metalworking processes (e. g. turning and laser processing) are covered by other Standards

BS EN ISO 10407-2-2008石油和天然气工业.旋转钻井设备.使用的钻杆部件的检验和分类

This part of ISO 10407 specifies the required inspection for each level of inspection (Tables B.1 through B.15)and procedures for the inspection and testing of used drill stem elements. For the purpose of this part ofISO 10407, drill stem elements include drill pipe body, tool joints, rotary-shouldered connections, drill collar,HWDP and the ends of drill stem elements that make up with them. This part of ISO 10407 has been preparedto address the practices and technology commonly used in inspection.The practices established within this part of ISO 10407 are intended as inspection and/or testing guidance andare not intended to be interpreted to prohibit the agency or owner from using personal judgement,supplementing the inspection with other techniques, extending existing techniques or re-inspecting certainlengths.This part of ISO 10407 specifies the qualification of inspection personnel, a description of inspection methodsand apparatus calibration and standardization procedures for various inspection methods. The evaluation ofimperfections and the marking of inspected drill stem elements is included.This part of ISO 10407 provides the original equipment manufacturers' requirements regarding the minimuminformation needed for the inspection of their specialized tools in Annex A.