绿色产品 纸和纸制品检测

绿色产品 纸和纸制品检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 35601-2017绿色产品评价 人造板和木质地板

本标准规定了人造板和木质地板绿色产品评价的术语和定义、评价要求、检验方法和评价方法。本标准适用于室内用人造板和木质地板绿色产品评价。

GB/T 35604-2017绿色产品评价 建筑玻璃

本标准规定了建筑玻璃绿色产品评价的术语和定义、评价要求和评价方法。本标准适用于建筑用钢化玻璃、夹层玻璃、中空玻璃的评价。

GB/T 35607-2017绿色产品评价 家具

本标准规定了家具产品的绿色产品评价要求和评价方法。本标准适用于所有家具产品。

GB/T 35608-2017绿色产品评价 绝热材料

本标准规定了绝热材料绿色产品评价的术语和定义、评价要求、检验方法、指标计算方法和评价方法。本标准适用于建筑用岩棉、玻璃棉、模塑聚苯乙烯泡沫塑料、柔性泡沫橡塑、泡沫玻璃等绝热材料的绿色产品评价。

GB/T 35609-2017绿色产品评价 防水与密封材料

本标准规定了绿色建筑防水与密封材料的术语和定义、评价要求、评价方法。本标准适用于建筑防水卷材、防水涂料和密封胶的绿色产品评价。

GB/T 35611-2017绿色产品评价 纺织产品

本标准规定了绿色纺织产品的评价指标和评价方法。本标准适用于各类纺织产品，包括纤维、纱线、织物、制品及其附件。

GB/T 35612-2017绿色产品评价 木塑制品

本标准规定了木塑制品绿色产品评价的术语和定义、评价要求、判定依据和判定规则。本标准适用于绿色木塑制品的产品评价。

GB/T 35613-2017绿色产品评价 纸和纸制品

本标准规定了纸和纸制品的绿色产品评价要求和评价方法。本标准适用于企业自主生产的生活用纸、生活用纸制品及装饰用纸的绿色产品评价，不适用于企业委托加工生产的生活用纸、生活用纸制品及装饰用纸的绿色产品评价。

GB/T 37422-2019绿色包装评价方法与准则

本标准规定了绿色包装评价准则、评价方法、评价报告内容和格式。本标准适用于绿色包装的评价，也适用于各类绿色包装评价规范的编制。

GB/T 37866-2019绿色产品评价 塑料制品

本标准规定了塑料制品绿色评价要求和评价方法。本标准适用于所有塑料制品。

GB/T 50878-2013绿色工业建筑评价标准

本标准适用于新建、扩建、改建、迁建、恢复的建设工业建筑和既有工业建筑的各行业工厂或工业建筑群中的主要生产厂房、各类辅助生产建筑。本标准规定了各行业评价绿色工业建筑需要达到的共性要求。

EN 12629-1-2000制作混凝土和硅酸钙结构产品的设备的安全性.第1部分:通用要求

This European Standard applies to machines for the manufacture of constructional products from concrete and/or calcium silicate examples of which are listed in annex A of this part. It gives concepts and general and common requirements for the design; operation and maintenance of such machines.This European Standard deals with hazards listed in Clause 4 which can arise during the operation and maintenance; including the interfaces; of the machines for the manufacture of constructional products from concrete and calcium silicate; when carried out as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. Part 2 to 8 of this standard give additional specific requirements and therefore have to be applied together withThis part. The preparation of concrete and/or calcium-silicate mixture and the transport from the mixer to the manufacturing plant are not part of this European Standard (see EN 12151:2007). The equipment for the transport and handling of formed products; other than the integrated transport system; is not covered byThis standard. At the time of drafting; machine specific noise test codes for EN 12629-2 to-8 are not available to fulfill the requirements of 5.7.2 and 7.4.2. When they are available; they will be incorporated in these standards.This document is not applicable to machines for the manufacture of constructional products from concrete and/or calcium silicate; which are manufactured before the date of publication of this document by CEN.

EN 12629-3-2002制作混凝土和硅酸钙结构产品的机械的安全性.第3部分:滑动和转台机械

This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to machines for the manufacture of constructional products of calcium-silicate or concrete, where the mould(s) is(are) mounted on a turning or slide table. The motive power for compressing the mixture is effected either mechanically (Annexes A, B), or hydraulically (Annexes C and D). EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium-silicate.This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers.This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.This European Standard applies to the machines from the point at which the mixture enters the machine (see point 1 of annexes A, B, C, D) and the point where the pallets for concrete products are brought to the assembly (see point 8 at annexes C and D) until the point where the green products are removed from the machine to the curing system (see point 2 of annexes A, B, C, D).This European Standard deals with the hazards listed in Clause 4 which can arise during the operation and maintenance, including the interfaces, of the slide and turntable machines, when carried out in accordance with the specifications given by the manufacturer or his authorised representative.This standard establishes safety requirements and/or methods of protection which apply to these machines.This document is not applicable to side and turntable machines, which are manufactured before the date of publication of this document by CEN.

EN 12629-6-2004生产混凝土和硅酸盐建筑产品用机器.安全.第6部分:生产预制加筋产品的固定和移动设备

This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to stationary and mobile equipment for the manufacture of precast reinforced products as defined in Clause 3 and applies to these machines also when used for the manufacture of non-reinforced moulded products. EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium-silicate.This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers.This document applies to the modules comprising production machines (with or without turnover demoulding) for the manufacturing of reinforced moulded products as shown below and illustrated in informative Annexes A and B. NOTEThis machinery can consist of three modules and they are generally designed to obtain a large moulding capacity (middle length of the products from 3 to 4 meters), with a limit height of demoulding of 1 m and a maximum width of 1,50 m. Module A: Manufacturing machines by vibration or compression and floating, with or without turnover. Module B: Stocking/hardening unit. Module C: Assembly for palletising/packaging of the concrete products.This module also permits the inspection of the products. These machines are designed to perform the following cyclic operations: manufacturing by vibration and even compression (oiling, mould feeding-concrete + reinforcement-, vibration, floating, interlocking, turnover, removing from mould); storage of moulds and pallet boards for concrete hardening; products destacking and packaging; moulds and pallet boards return to the manufacturing module. Any of these operations may be manual, semi-automatic or automatic.This document deals with automatic and semi-automatic operations of modules A and C and with automatic operations of module B. There are two main types of stationary and mobile equipment for manufacture of precast reinforced products: equipment with instant removing from mould on pallet boards or on the floor; equipment with delayed removing from mould (collection of moulds: the concrete products are hardened in the mould).This standard does not deal with the machines for: mixing of concrete; manufacturing of the reinforcing steel; evacuation of the products to the stockyard; manufacturing of products (e. g. slabs or blocks) covered by other parts of EN 12629. Annex A shows the most common types of units as well as their variations: immediate demoulding unit and delayed demoulding unit.This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.This document is not applicable to stationary and mobile equipment for the manufacture of precast products, which are manufactured before the date of publication of this document by CEN.

DIN EN 12629-1-2011生产混凝土和硅酸钙建筑产品用机器.安全.第1部分:一般要求;德文版本EN 12629-1-2000+A1-2010

This European Standard applies to machines for the manufacture of constructional products from concrete and/or calcium silicate examples of which are listed in Annex A of this part. It gives concepts and general and common requirements for the design, operation and maintenance of such machines.

DIN EN 12629-3-2011混凝土和硅酸钙结构产品生产设备.安全性.第3部分:滑式和转盘机;德文版本EN 12629-3-2002+A1-2010

This part of EN 12629, taken together with EN 12629-1-2000+A1-2010, applies to machines for the manufacture of constructional products of calcium-silicate or concrete, where the mould(s) is (are) mounted on a turning or slide table. The motive power for compressing the mixture is effected either mechanically (Annexes A,B),or hydraulically(Annexes C and D).