欢迎访问中科光析科学技术研究所官网!

免费咨询热线
400-640-9567|
蒸汽淋浴房检测项目报价? 解决方案? 检测周期? 样品要求? |
点 击 解 答 ![]() |
本部分规定了家用和类似用途电器的基本术语。本部分适用于家用和类似用途电器相关标准的制修订以及其他相关技术文件的编制和技术交流活动。
本标准规定了建筑给水排水设备和器材,包括卫生器具,水嘴,加压、调节和贮存设备,加热贮热设备,地漏,检查井,建筑水处理设备,游泳池、游乐池设备,冷却设备,水景设备,雨水利用设备,管材,管件,阀门,计量、检测仪表等方面的专用术语。本标准适用于建筑给水排水设备和器材的专用术语。
本标准规定了厨房和卫生间及类似场合使用的五金产品的术语、定义及分类。本标准适用于厨卫五金产品的设计、生产、贸易、质量检验、科学研究、教学等领域。
本规范适用于以浮法玻璃生产工艺为主的新建、改建和扩建平板玻璃工厂的设计。
本标准适用于一般工业与民用建筑的新建、扩建、改建工程中的给排水、采暖、燃气安装工程。本标准是施工企业编制施工作业计划、签发施工任务书、考核工效、实行按劳分配和经济核算的依据;是规范建筑劳务合同的签订和履行,指导施工企业劳务结算与财务管理的依据;是各地区、各部门编制预算定额、清单计价规范人工消耗量标准的依据;是各地区建设行政主管部门发布实物工程量人工单价的基础。
本标准规定了桑那房的术语和定义、分类、要求、试验方法、检验规则和标志、使用说明书、包装、运输、贮存。 本标准适用于由桑那加热器、干蒸房体、蒸汽发生器、淋浴房体、喷淋器等配件组成,并带有电器控制装置的干湿蒸桑那房。本标准也适用于由桑那加热器、干蒸房体、淋浴房体、喷淋器等组成的干蒸淋浴房。本标准一般没考虑:无人照看的幼儿和体弱者使用;幼儿拿器具玩耍的情况。本标准不适用于:准备用在特殊场所的器具,如存在腐蚀性和爆炸性气体(灰尘、蒸汽或煤气)的地方;打算仅引起人体的一部分出汗的器具;使用者的头部保持在加热区外的发汗浴器;帐篷及其他可折叠式桑那浴器。
La présente norme spécifie les prescriptions et les méthodes d'essai pour les cabines de douche multifonctions ("cabines" dans la suite du document) à usage domestique.La présente norme ne s'applique pas aux cabines de douche et aux parois de douche.
This standard specifies requirements and test methods for multifunction shower cabinets (subsequently referred to as unit(s)), used for domestic purposes.This standard does not apply to shower cabinets and shower enclosures.NOTE For the purposes of this standard the term "domestic purposes" includes use in hotels, accommodation forstudents and similar buildings, except when special provisions e. g. medical, are required.
This part of BS 5440 specifies requirements for the installation of gasappliances to chimneys, chimney installation work likely to beundertaken by gas engineers and operatives working under UK gasindustry conditions and requirements for the maintenance of chimneys.It is applicable to open flue chimneys for Type B gas appliances androom-sealed chimney configurations for Type C gas appliances, each ofrated input not exceeding 70 kW net (see Note 2 and Note 3), burning1st, 2nd or 3rd family gases. It applies to chimneys of the naturaldraught or fanned draught type and is applicable to open flue chimneysand room-sealed chimneys supplied with the appliance as well as tothose supplied separately.It complements the requirements for the design, installation andcommissioning of chimneys as required in BS EN 15287-1 andBS EN 15287-2 and requires extra details that are specific to the UK gasindustry. This is kept in perspective by quoting some details ofBS EN 15287-1 and BS EN 15287-2.It specifies the following:• requirements for the selection of the appropriate flueing option forgas appliances in the UK;• requirements for the installation of gas appliances to newchimneys, or chimney configurations;• requirements for the installation of gas appliances to existingchimneys or chimney configurations;• requirements for the installation of appliances which carry a CEmark and for which the manufacturer’s instructions are availableto the installer;• requirements installation of appliances which do not carry a CEmark and used/second-hand appliances for which themanufacturer’s instructions are available to the installer.This part of BS 5440 is applicable to:• complete chimney and all chimney components from the applianceconnection to the discharge point into outside air;• the installation of gas appliances to existing chimneys that wereintended originally for appliances burning other fuels;• chimneys for residential park homes but not to chimneys forleisure accommodation vehicles.This part of BS 5440 is not applicable to gas-fired incinerators. Refer toBS 5871-3 for the installation of decorative fuel effect appliances.This part of BS 5440 includes compatibility of appliances installed inthe UK with new chimneys designated under BS EN 1443 and withexisting chimneys, including non-designated chimneys.
This British Standard specifies requirements for the selection,installation, inspection, commissioning and maintenance of gas‑firedwater-heating appliances, which have a rated heat input notexceeding 70 kW, based on net calorific value.It applies to water-heating appliances utilizing 1st, 2nd or 3rd familygases designed to operate in the condensing or non‑condensingmode for the supply of hot water for domestic purposes in domesticdwellings or domestic dwellings in commercial premises.This standard does not apply to:a) water-heating appliances with a rated input of over 70 kW;b) hot water supply systems in multiple dwellings supplied from acentral source.It does not cover the detailed design and installation of the whole hotwater distribution system, which was specified in BS 5449.This standard applies to water-heating appliances which carry aCE mark and also to previously used water-heating appliances whichdo not carry the CE mark (see 5.3.1).
This European Standard gives biological, physical and procedural containment measures for work with genetically modified plants including plants where the transferred genetic material is derived from a non-plant source. It defines measures to minimize hazards identified by risk analysis.nContainment may be provided in a greenhouse or in a growthroom, laboratory or other containment facility.nContainment of genetically modified microorganisms and/or small animals associated with plants is not included in this standard. Containment of microorganisms in laboratories is covered in EN 12128.
This standard specifies requirements and test methods for multifunction shower cabinets (subsequentlyreferred to as unit(s)), used for domestic purposes.This standard does not apply to shower cabinets and shower enclosures.NOTE For the purposes of this standard the term "domestic purposes" includes use in hotels, accommodation forstudents and similar buildings, except when special provisions e. g. medical, are required.
前沿科学
微信公众号
中析研究所
抖音
中析研究所
微信公众号
中析研究所
快手
中析研究所
微视频
中析研究所
小红书