燃气设备用多功能控制装置检测

燃气设备用多功能控制装置检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 30597-2014燃气燃烧器和燃烧器具用安全和控制装置通用要求

本标准规定了使用GB/T 13611规定的城镇燃气的燃气燃烧器和燃烧器具用安全和控制装置及其组件(以下简称“控制装置”)的术语和定义、分类和分组、结构和材料、要求、试验方法、标识、安装和操作说明书、包装、运输和贮存。本标准适用于以下控制装置:--自动和半自动阀;--燃烧控制装置;--熄火保护装置;--燃气和空气比例调节装置;--压力调节装置;--旋塞阀总成;--温度控制装置;--多功能控制装置;--压力传感装置;--阀门检验系统。

GB 50016-2014(2018)建筑设计防火规范(2018年版)

本规范适用于下列新建、扩建和改建的建筑：厂房；仓库；民用建筑；甲、乙、丙类液体储罐(区)；可燃、助燃气体储罐(区)；可燃材料堆场；城市交通隧道。人民防空工程、石油和天然气工程、石油化工工程和火力发电厂与变电站等的建筑防火设计，当有专门的标准时，宜从其规定。本规范不适用于火药、炸药及其制品厂房(仓库)、花炮厂房(仓库)的建筑防火设计。

GB/T 50680-2012城镇燃气工程基本术语标准

本标准规定了燃气工程技术的基本术语，适用于城镇燃气工程及相关领域。

CJ/T 451-2014商用燃气燃烧器具通用技术条件

本标准规定了商用燃气燃烧器具(以下简称燃具)的术语和定义,分类,结构和材料,要求,试验方法,检验规则,标识、警示和使用说明书,包装、运输和贮存。本标准适用于商用厨房等使用,以符合GB/T 13611规定的燃气为能源,安装在室内、燃烧产物机械排至室外的燃烧器具。

JGJ 57-2016剧场建筑设计规范

本规范适用于新建、扩建和改建的剧场建筑设计。

AQ 7002-2007纺织工业企业安全管理规范

本规范规定了纺织工业企业安全管理的基本要求。 本规范适用于各类纺织工业企业。

DB11/T 302-2005燃气输配工程设计施工验收技术规定

本规定适用于北京市居民生活、商业、工业企业、采暖通风和空调等用燃气作燃料的新建、扩建r或改建的燃气输配工程的设计、施工及验收

UL 1776-2002高压清洗机

These requirements cover inverters ,converters ,charge controllers ,and output controllers intended for use in stand-alone(not grid connected) or utility-interactive (grid-connected) power systems .Utility-interactive inverters and converters are intended to be installed in parallel with an electric supply system or an electric utility to supply common loads.

EN 30-1-1-2008家用燃气灶具.第1-1部分:安全性.一般性;包含修改件A1-2010

This European Standard specifies the construction and performance characteristics as well as the requirements and methods of test for the safety and marking of freestanding and built-in domestic cooking appliances burning the combustible gases given in 4.1 according to the categories specified in 4.2, referred to in the text as "appliances".This European Standard covers the following types of domestic cooking appliances, as defined in Clause 3, and belonging to the classes defined in 4.3 (see Table 1): independent freestanding hotplates; independent built-in hotplates; independent hotplates and grills; table cookers; freestanding ovens; built-in ovens; freestanding or built-in grills; griddles; freestanding cookers; built-in cookers. Unless specifically excluded hereafter,This European Standard applies to these appliances or their component parts, whether or not the component parts are independent or incorporated into a single appliance, even if the other heating components of the appliance use electrical energy (e. g. combined gas-electric cookers).This European Standard includes requirements covering the electrical safety of equipment incorporated in the appliance that is associated with the use of gas. It does not include requirements covering the electrical safety of electrically-heated component parts or their associated equipment1).This European Standard does not apply to: a) outdoor appliances; b) appliances connected to a combustion products evacuation duct; c) appliances having a pyrolitic gas oven; d) appliances having covered burners which are not in conformity with the constructional requirements of 5.2.8.2.2; e) appliances incorporating flame supervision devices and having an automatic ignition device for which the duration of the ignition attempt is limited by design; f) appliances equipped with a burner that is periodically ignited and extinguished under the control of an automatic on/off device; 1) Refer to the electrical safety rules. g) appliances equipped with an oven and/or with a grill having a fan: 1) either for the supply of combustion air or for the evacuation of the products of combustion; 2) or for the circulation of the products of combustion within the compartments; h) appliances supplied at pressures greater than those defined in 7.; i) appliances having one or more burners that are capable of remote operation (type1 or type 2), unless the burner(s) concerned are thermostatically controlled oven burners of time-controlled ovens that are designed for a delayed start without the user being present; j) appliances incorporating one or more hotplate or grill burners that enable the user to program the cooking cycle, including the start and/or the end of the cycle.This European Standard does not cover the requirements relating to third family gas cylinders, their regulators and their connection.This European Standard only covers type testing.

NF D35-354-2008专用液化石油气装置用规范.家用无烟道空间加热器(包括扩散式催化燃烧加热器)

La présente Norme européenne spécifie les prescriptions, les méthodes d'essais et le marquage des appareils domestiques de chauffage non raccordés à un conduit d'évacuation des produits de la combustion, y compris les appareils à combustion catalytique diffusive, dont le débit calorifique nominal est inférieur à 4,2 kW (HS), alimentés par des gaz de la 3e famille sous la pression nominale de service ne dépassant pas 50 mbar, désignés dans le texte par "appareils".La présente Norme européenne est applicable aux types d'appareils suivants : appareils fixes fonctionnant au butane commercial et/ou au propane commercial ; appareils portatifs ou mobiles fonctionnant soit au butane commercial, soit au butane commercial et au propane commercial, y compris ceux qui ont un compartiment d'installation pour une bouteille portative rechargeable de gaz de pétrole liquéfié.Aucune prescription particulière concernant le rendement thermique n'est définie pour ces types d'appareils car toute la chaleur produite par le processus de la combustion se dégage dans l'espace à chauffer ; les exigences concernant la combustion, qui relèvent de la sécurité, garantissent la combustion du combustible gazeux.La présente Norme européenne ne concerne pas les appareils incorporant des dispositifs électriques de contrôle du gaz.L'annexe A donne les détails concernant les catégories d'appareils commercialisées dans les divers pays.Les exigences pour les appareils données dans cette norme européenne supposent que l'alimentation en gaz à partir de la bouteille soit contrôlée par un détendeur dont la pression nominale maximale de détente atteint 50 mbar.La présente norme européenne ne concerne pas les bouteilles de gaz de pétrole liquéfié, ni leurs détendeurs associés, ni les tubes et tuyaux flexibles, qui doivent être conformes aux réglementations nationales en vigueur. La présente norme couvre uniquement les essais de type.

DIN EN 126-2012燃气设备用多功能控制装置

This European Standard specifies the safety, construction and performance requirements for multifunctional controls intended for use with gas burners, gas appliances and similar use, hereafter referred to as "MFC". This European Standard is applicable to MFC with declared maximum inlet pressures up to and including 50 kPa (500 mbar) of nominal connection sizes up to and including DN 150 for use with one or more fuel gases in accordance with EN 437. MFC consist of two or more functions, at least one of which is a mechanical control, as specified in the relevant control standards (see Figure 1). MFC consisting only of electronics are not covered by EN 126 (an example is a combination of functions according to EN 298 and EN 1643).

DIN EN 449-2008专用液化石油气装置用规范.无排气口的居室暖器(包括扩散催化燃烧的加热器)

This European Standard specifies the requirements, the test methods and the marking of domestic flueless spaceheaters, including diffusive catalytic combustion heaters, having a nominal heat input (Hs), not exceeding 4,2 kWburning 3rd family gases at nominal operating pressures not exceeding 50 mbar. referred to in the text as'appliances'.This European Standard is applicable to the following types of appliances:a) fixed heaters burning commercial butane and/or commercial propane;b) portable or mobile heaters burning either commercial butane, or, commercial butane and commercial propane including those that incorporate a LPG container installation compartment for a transportable refillable liquefied petroleum LPG container.There are no specific thermal efficiency requirements appropriate to these types of appliance as:c) all the heat produced by the combustion process is released into the space to be heated;d) the requirements with regard to the combustion performance, which is a safety matter, ensure the effective burning of the fuel gas.It does not cover appliances incorporating electrically operated gas control systems.Annex A gives the details of the categories of appliances marketed in various countries.Requirements for appliances given in this standard assume that the supply of gas from the container will begoverned by a pressure regulator having a maximum nominal outlet pressure of 50 mbar.This European Standard does not cover LPG containers for liquefied petroleum gas neither their associatedregulator nor tubing and flexible hoses which shall comply with national requirements in force.This European Standard only covers type testing.

DIN EN 1596-2005专用于液化石油器的规范.移动式和便携式非家用强制对流直燃式空气加热器

The change A1 of EN 1596 concerns several technical amendments due to need for regulation appearing after ratification of the standard. The standard itself defines for the purpose of type approval the safety characteristics, the test methods and the marking of mobile, non-domestic forced convection direct fired air heaters with a nominal heat input of up to 180 kW (HS) for the combustion of 3rd family gases (liquefied petroleum gases). Most significant technical change stipulated by this draft ist the lowering of the air delivery temperature from 80 °C to 55 °C.

DIN EN 14829-2007不超过6kW的普通供热用独立式燃气无烟筒对流加热器

This document specifies, for the purpose of type examination, the requirements and test methods for construction, safety, marking and rational use of energy of 2ne and 3rd family gas-fired domestic flueless space heating appliances having a nominal input not exceeding 6 kW (based on net calorific value). It covers the following Type AAS fixed flueless heaters: NOTE These are type A appliances fitted with an atmosphere sensing device, with or without a fan. a) heaters with or without a catalytic converter; b) Category 1 appliances burning gases of the second family; c) Category 2 appliances burning gases of the second and third families. It does not cover qi. Mobile heaters.ii. Category 1 appliances burning gases of the third family.iii. Portable flueless heaters.iv. Diffusive catalytic combustion heaters. There are no specific thermal efficiency requirements appropriate to these types of appliance as: -- All the heat produced by the combustion process is released into the space to be heated. -- The requirements with regard to the combustion performance, which is a safety matter, ensure the effective burning of the fuel gas. This standard is only applicable to appliances which are to be type tested. Matters related to quality assurance systems, tests during production and to certificates of conformity of auxiliary devices are not dealt with by this standard.

DIN EN 15033-2007车辆和船舶用液化石油气生产卫生热水储水加热器封闭室

This European Standard defines the specifications and test methods for the construction, safety, rational use of energy and fitness for purpose, environment, classification and marking of room sealed storage water heaters for the production of sanitary hot water using LPG for:— vehicles as defined in article 1 of Directive 70/156/EEC (see 3.12);— caravan holiday homes;— agricultural, forestry and mobile machinery, and— boats;hereafter called "appliance".This standard applies to appliances:«— type Ci, €3 and Cs (room sealed, see CEN/TR 1749) with combustion air intake and outlet for the products of combustion (combined or not) in the wall or roof;— fitted with atmospheric burners;— appliances fitted with or without a fan on the combustion circuit;— using LPG at the pressure ^BPOO) indicated in EN 437, (for caravan holiday homes and boats see Annex A);— of nominal heat input not exceeding 7 kW (//,);— appliances whether connected to the water mains pressure or on board water supply;— appliances using, where appropriate, 12 V or 24 V DC electrical supply (or appliances with an additional230 V heating element).This standard does not contain all the necessary requirements for:— appliances which fulfil a dual purpose role of space heating and heating water for sanitary hot water use.This standard covers type testing only.

BS 5990-2006额定热输入在330 kW－2 MW之间的工业和商业空间加热用直接燃气式强制对流空气加热器规范.安全性和性能要求（不包括电气要求）（第2版）

This British Standard gives detailed requirements, including safety andperformance requirements and methods of test, for direct gas firedforced convection air heaters having heat inputs greater than 330 kWbut not exceeding 2 MW, intended for industrial and commercialapplications. Appliances covered by this standard are not intended forinstallation in domestic dwellings.The scope of this standard includes direct gas fired forced convectionair heaters for use both with and without ducting, and intendedprimarily for space heating applications. It therefore includes airheaters designed to provide make-up air, door curtain heaters, spraybooth heaters, portable air heaters and direct fired air heaters capableof providing full space heating.This standard specifies the requirements for direct gas fired forcedconvection air heaters designed for permanent outdoor installation. Italso specifies the requirements for transportable direct gas fired forcedconvection air heaters.This standard applies to appliances designed to operate on normal lowpressure district supplies of 2nd family gas.For appliances fitted with gas boosters, additional requirements mayapply.

BS 5991-2006额定热输入在330 kW－2 MW之间的工业和商业空间加热用直接燃气式强制对流空气加热器规范.安全性和性能要求（不包括电力需求）（第2版）

This British Standard specifies detailed requirements, including safetyand performance requirements and methods of test, for indirect gasfired forced convection air heaters having heat inputs greaterthan 330 kW but not exceeding 2 MW, intended for industrial andcommercial applications. Appliances covered by this standard are notintended for installation in domestic dwellings.The scope of this standard includes indirect gas fired forced convectionair heaters for use both with and without ducting, and intendedprimarily for space heating applications.This standard also specifies the requirements for indirect gas firedforced convection air heaters designed for permanent outdoorinstallation.It applies to appliances designed to operate on normal low pressuredistrict supplies of 2nd family gas.For appliances fitted with gas boosters and/or flue dampers, additionalrequirements may apply.This standard does not apply to portable and transportable indirect gasfired forced convection air heaters.

BS EN 88-2-2007燃气器具用压力调节器和相关的安全装置.第2部分:入口压力大于500毫巴、小于等于5巴的压力调节器

This European Standard specifies the safety, construction and performance requirements for pressureregulators (hereafter referred to as regulators) intended for use with gas burners and gas-burningappliances using fuel gases of the 1st, 2nd and 3rd families. This European Standard covers typetesting only. It also provides additional information for the purchaser and user.This European Standard is applicable to regulators that may be tested independently of gas burnersand gas-burning appliances, which have a declared working pressure from above 500 mbar up to andincluding 5 bar.This European Standard is also applicable to regulators incorporating safety devices.NOTE 1 For safety accessories and pressure accessories, the requirements of EN 13611:2007, Annex F alsoapply.NOTE 2 Regulators conforming to EN 88-2 fulfil also the requirements of EN 88-1.Regulators intended to be used on pipe work installations for third family gases are also covered byEN 13785 and EN 13786.This European Standard is not applicable to:a) pressure regulators that are connected directly to mains pipe-work or to a container thatmaintains a standard distribution pressure;b) pressure regulators which use electrical auxiliary energy.