半自动捆扎机检测

发布时间：2024-06-21 作者：中析研究所浏览：

GB/T 15069-2008罐头食品机械术语

本标准规定了罐头食品机械常用术语，包括一般术语、空罐备料术语、罐身设备术语、封罐设备术语、原料处理设备术语、物料加工设备术语、装罐（充填）设备术语、杀菌设备术语、包装设备术语、其他设备术语、各类容器术语，以及常用相关术语。本标准适用于罐头食品机械。

GB/T 26960-2011半自动捆扎机

本标准规定了半自动梱扎机（以下简称"捆扎机"）的术语和定义、型号、型式与基本参数、技术要求、试验方法、检验规则及标志、包装、运输与贮存。本标准适用于以机用塑料打包带（以下简称"打包带")作为梱扎材料，接头型式为热熔搭接的半自动捆扎机。

YB/T 4085-2008金属材料捆扎机械通用技术条件

本标准规定了金属材料捆扎机械(包括捆扎机、夹紧成形机)的型号编制方法、基本参数、技术要求、检验方法和检验规则、标志、包装和贮运以及捆扎范围。本标准适用于采用钢带或钢丝作为捆扎材料，对冶金工厂钢材或其他金属材料进行夹紧、捆扎的设备。

HG/T 20533-1993化工机械化运输设计常用名词术语统一规定

本标准规定了化工机械化运输设计常用名词术语，适用于化工机运制订行业标准、编制技术文件、编写和翻译资料等。

HG/T 20560-1997化工机械化运输工艺设计施工图内容和深度规定

1.0.1本规定作为指导性文件，旨在统一化工机械化运输工艺设计施工图的内容和深度，使之准确、完整，确保设计质量，方便施工安装。 1.0.2本规定对化工粉粒体和块状物料储运系统工艺施工图设计文件的组成及其深度、格式和表示方法等作了规定。 1.0.3本规定适用于新建大、中型化工企业工程建设的固体物料储运系统(由HG 20518《化工机械化运输设计原则规定》之总则所界定的单元操作和生产装置)工艺设计。扩建、建或小型化工企业固体物料储运系统工艺设计可参照执行。 1.0.4本规定以我国历年沿用的设计体制为基本架构，但设计文件(图纸、表格等)的表示方法和格式，则力求向通用设计体制靠近，并与HG 20519、HG 20546、HG 20557～20559相一致。

JC/T 2355-2016五金卫生洁具安全生产规范

本标准规定了五金卫生洁具生产企业(以下简称企业)的术语和定义、机构和人员、管理制度、设备设施安全、作业安全、承包商和主要供应商的安全管理以及事故预防和处理。本标准适用于企业开展安全生产标准化工作以及对标准化工作的咨询、认证服务和评审，其他相关生产企业可参照执行。

QB/T 6003-2015真空制盐工业设备安装工程施工及验收规范

本规范适用于新建、扩建、改建、迁建及设备大修的真空制盐工厂整体安装设备和现场组焊设备安装工程施工及验收，包括卤水净化、蒸发结晶、脱水、干燥、包装、储运工序和副产品芒硝及石膏等的生产设备以及与之配套的循环水设备。其他类似采用真空蒸发制盐工艺及装置生产的无机盐(如芒硝)的设备安装工程施工及验收亦可参照本规范执行。热压制盐工程的施工及验收参照本规范执行。本规范未包括供热、发电、机修、供水(不含制盐循环水)、自控、电气等和国外设备的安装，其施工及验收，应按有关现行或行业标准的规定和国外随机技术条件(含设计图)的规定执行。本规范涉及的管道安装工程，其施工与验收，应按现行标准GB 50235《工业金属管道工程施工规范》、GB 50184《工业金属管道工程施工质量验收规范》和GB 50236《现场设备、工业管道焊接工程施工规范》的相关规范规定执行。本规范所引用的标准，凡是注日期的引用标准，仅所注日期的版本适用于本规范。凡是不注日期的引用标准，其新版本(包括所有的修改单)适用于本规范。

WS/T 118-1999卫生行业药疗器械、仪器设备(商品、物资)分类与代码

本标准规定了卫生行业医疗器械、仪器设备（商品、物资）的分类与代码。本标准适用于卫生行业各医疗、教学、科学研究和生物制品等单位对物资管理、计划、统计及会计业务等使用。

YC/T 384.2-2018烟草企业安全生产标准化规范第2部分:安全技术和现场规范

YC/T 284的本部分规定了烟草企业安全生产标准化的安全技术和现场规范要求，包括设备设施、作业活动、作业环境和现场运行的安全要求。本部分适用于省级烟草公司(局)、省级工业公司等省级公司、烟草加工和烟草商业生产经营单位。其中，烟草商业生产经营单位特指地市级烟草公司，烟草加工单位含烟叶复烤、卷烟制造、雪茄烟制造、再造烟叶生产的单位。烟草配套和多元化投资的其他生产经营单位，如醋酸纤维、烟草印刷等单位可参照执行。

SN/T 3191-2012进出口包装行业成套设备检验技术要求

本标准规定了进出口包装行业成套设备之包装机械成套设备(以下简称成套包装设备)的检验技术要求。本标准适用于3.1条定义的进出口成套包装设备(含允许进口的旧成套包装机械设备)的检验。本标准不适用于食品、药品包装设备的检验。本标准不适用于包装容器制造设备及包装材料制造设备的检验。

JB/T 3790.2-1994机械式半自动捆扎机

本标准规定了机械式半自动捆扎机的术语、型式和基本参数、技术要求、试验方法、检验规则以及标志、包装、运输、贮存。本标准适用于以机用塑料打包带作为捆扎材料，接头型式为热熔搭接的机械式半自动捆扎机。

EN ISO 10821-2005工业缝纫机械.缝纫机械,设备和系统的安全要求.包含修改件A1-2009

This International Standard identifies hazards and specifies safety requirements applicable to sewingmachines, sewing units and sewing systems designed for professional (industrial, commercial or laboratory)use in industries including the clothing and footwear, leather goods, shirts and blousery, hosiery and knitwear,lingerie, glove, upholstery and packaging industries, and in shoe repair.

DIN EN 415-1-2014打包机的安全.第1部分:打包机及相关设备的专用术语和分类,德文版本EN 415-1-2014

This European standard defines the field of packaging machines in detail, but briefly these are: Filling and Dosing machines; closing machines; labelling, decorating and coding machines; cleaning, sterilising, cooling and drying machines; fill and seal machines; inspection machines; container and component handling machines; form, fill and seal machines; cartoning machines; wrapping machines; group or transit packaging machines; pallet or loading unit forming, dismantling and securing machines.

DIN EN 415-7-2009包装机械的安全.第7部分:组件和二次包装机械,德文版本EN 415-7:2006+A1:2008

This European Standard applies to the following groups of machines:Group and secondary packaging machines and the collating systems associated with them.The individual machines are described in 3.2 of this European Standard.This European Standard deals with safety requirements for machine design, construction, installation,commissioning, operation, adjustment, maintenance and cleaning of group and secondary packagingmachines.The extent to which hazards, hazardous situations and events are covered, are indicated in Clause 4.ExclusionsThis European Standard is not applicable to the following machines: -- machines that were manufactured before the date of publication of this document by CEN; -- strapping machines. These machines are covered by EN 415-8; -- crate loaders and un-loaders for pre-formed rigid containers. These machines are covered by EN 415-2; -- cartoning machines. Cartoning machines are covered by EN 415-3.This European Standard does not consider the following hazards: -- use of group and secondary packaging machines in potentially explosive atmospheres; -- health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject; -- hazards that may be associated with electromagnetic emissions from group and secondary packaging machines; -- hazards that may be associated with decommissioning group and secondary packaging machines.

DIN EN 415-8-2011包装机械的安全性.第8部分:捆包机;德文版本EN 415-8-2008

This European Standard applies to the following groups of machines: - powered hand strapping tools; - semi-automatic strapping machines; - automatic strapping machines; - horizontal pallet strapping machines; - vertical pallet strapping machines. The individual machines are described in 3.3. This European Standard deals with safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of strapping machines. The extent to which hazards, hazardous situations and events are covered, are indicated in Clause 4. Exclusions This European Standard is not applicable to the following machines: - strapping tools that are powered exclusively by manual effort; - strapping machines that were manufactured before the date of publication of this document by CEN. This European Standard does not consider the following hazards: - the use of strapping machines in potentially explosive atmospheres; - the health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject; - hazards that can be associated with electromagnetic emissions from strapping machines; - hazards that can be associated with decommissioning strapping machines.

DIN EN 415-8 Berichtigung 1-2016包装机械的安全性. 第8部分: 捆扎机; 德文版本EN 415-8-2008, DIN EN 415-8-2011-06勘误表

This European Standard establishes safety requirements for power operated strapping machines and the collating systems that are associated with them. This group of machines is defined in detail in clause 3 of this standard, with diagrams illustrating examples of the principle of operation of each machine type. This standard covers the safety requirements for machine design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning. This part of EN 415 applies primarily to machines manufactured after the date of issue of this standard. Exclusions: This standard does not cover strapping tools that are powered exclusively by hand. This standard does not cover in detail the health, safety or hygiene hazards associated with the products which may be handled by strapping machines, but does include general advice on these subjects. This standard does not cover the hazards that may be associated with decommissioning strapping machines.

DIN EN 1010-1-2011机械安全性.印刷和纸加工机械的设计和建造的安全性要求.第1部分:通用要求.德文版本EN 1010-1-2004+A1-2010

This document applies to: - printing machines for printing on paper and similar materials, including screen printing presses; equipment used in the preparation of the printing process and additional equipment on printing machines are also considered to be printing machines. This standard also covers machinery used for the handling of paper, products, printing formes and checking the print quality (auxiliary printing machinery).- paper converting machines, i.e. machines to process, convert or finish paper, board and similar materials which are processed, converted or finished in a similar manner.