一般用途镀锌低碳钢丝编织网六角网检测

发布时间：2024-06-21 作者：中析研究所浏览：

QB/T 1925.1-1993一般用途镀锌低碳钢丝编织网.方孔网(镀锌低碳钢丝布)

本标准规定了网孔为0.50~12.70mm的一般用途镀锌低碳钢丝编织方孔网的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。t本标准适用于建筑、围栏、一般筛选、过滤等用途的用镀锌低碳丝钢编织的方孔网。

QB/T 1925.2-1993一般用途镀锌低碳钢丝编织网.六角网

本标准规定了一般用途镀锌低碳钢丝编织的六角网的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。t本标准适用于建筑保温、防护、围栏等一般用途的金属丝编织的六角网。

QB/T 1925.3-1993一般用途镀锌低碳钢丝编织网.波纹方孔网

本标准规定了一般用途镀锌低碳钢丝编织的波纹方孔网的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。t本标准适用于矿山、冶金、建筑及农业生产中的筛选、过滤等一般用途镀锌低碳钢丝编织的波纹方孔网。

ASTM A810-2001热浸镀锌钢管用绕网标准规范

1.1 This specification covers various designs of welded wire mesh or twisted (woven) hexagonal wire mesh, zinc coated before fabrication, to be used as reinforcement for the concrete applied in the manufacture of negative buoyancy pipe needed for laying pipe in marshes or in water. The mesh is also used as reinforcement for concrete applied to pipe as a bendable or nonbendable mechanical protective coating when laying pipe in a harsh environment.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

ASTM A810-2001(2008)镀锌（镀锌）钢管缠绕网的标准规范

1.1 This specification covers various designs of welded wire mesh or twisted (woven) hexagonal wire mesh, zinc coated before fabrication, to be used as reinforcement for the concrete applied in the manufacture of negative buoyancy pipe needed for laying pipe in marshes or in water. The mesh is also used as reinforcement for concrete applied to pipe as a bendable or nonbendable mechanical protective coating when laying pipe in a harsh environment. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

ASTM A810-2001(2009)e1热浸镀锌钢管用绕网的标准规范

1.1 This specification covers various designs of welded wire mesh or twisted (woven) hexagonal wire mesh, zinc coated before fabrication, to be used as reinforcement for the concrete applied in the manufacture of negative buoyancy pipe needed for laying pipe in marshes or in water. The mesh is also used as reinforcement for concrete applied to pipe as a bendable or nonbendable mechanical protective coating when laying pipe in a harsh environment. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

ASTM A810-2001(2014)镀锌钢管用绕网的标准规格

1.1x00a0;This specification covers various designs of welded wire mesh or twisted (woven) hexagonal wire mesh, zinc coated before fabrication, to be used as reinforcement for the concrete applied in the manufacture of negative buoyancy pipe needed for laying pipe in marshes or in water. The mesh is also used as reinforcement for concrete applied to pipe as a bendable or nonbendable mechanical protective coating when laying pipe in a harsh environment. 1.2x00a0;The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3x00a0;The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

SFS 8403-1986造船．热浸镀锌六角网

Tämä standardi koskee laivanrakennuksessa käytettäviä teräksisiä, kuumasinkittyjä kuusikulmaverkkoja.

DIN EN 10223-2-2013栅栏用钢丝和钢丝制品. 第2部分:农业, 隔离和栅栏用六角形网眼钢丝网; 德文版本EN 10223-2-2012

This European Standard specifies requirements for the dimensions and coating of steel wire netting having meshes of hexagonal shape specified for agricultural,insulation and fencing purposes.

DIN EN 10223-5-2013栅栏和网用钢丝和钢丝制品.第5部分:钢丝编制铰链网格和结节网格栅栏.德文版本EN 10223-5-2012

This European Standard specifies preferred dimensions, properties and coatings of zinc and zinc alloy coated steel wire woven hinged joint and knotted mesh fencing.

DIN EN 15381-2008土工布和土工布相关产品.公路和沥青覆盖层要求的使用特性

This European Standard specifies the relevant characteristics of metallic and non-metallic geotextiles andgeotextile-related products used in the construction of pavements and asphalt overlays and the appropriatetest methods to determine these characteristics.The intended use of these geotextiles and geotextile-related products is to fulfil one or more of the followingfunctions: reinforcement, stress relief and barrier. The use of geotextiles and geotextile-related products is tobe considered as a part of an interlayer and asphalt overlay system.This standard is not applicable to geosynthetic barriers, as defined in EN ISO 10318.This standard provides for evaluation of conformity of the product to this European Standard and for factoryproduction control procedures.This standard defines requirements to be met by manufacturers and distributors with regard to thepresentation of product properties.NOTE 1 Particular application cases or national specifications may contain additional requirements regarding productapplication or installation and specifying preferably standardized test methods, if they are technically relevant and notconflicting with European Standards.

BS 8443-2005建立专用混凝土添加剂适用性的规范

This British Standard specifies terms, definitions and requirements for special purpose admixtures in order to establish suitability for use in concrete conforming to BS EN 206-1.The admixtures covered are listed as follows; they are intended for use in plain, reinforced, foamed, prestressed and semi-dry concrete as appropriate. The concrete can be site mixed, ready mixed or pre-cast:— underwater concrete admixtures;— shrinkage reducing admixtures;— corrosion inhibiting admixtures;— pumping aids;— segregation reducing admixtures;— foaming admixtures;— semi-dry concrete admixtures.Provisions governing the practical application of admixtures in the production of concrete, i.e.requirements concerning composition, mixing, placing, curing, etc. of concrete containing admixtures are not within the scope of this standard.