斜切割机检测

斜切割机检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 2900.28-2007电工术语 电动工具

本部分规定了电工术语中电动工具的术语和定义。 本部分适用于电工技术中涉及电动工具的技术领域。

GB/T 3883.306-2017手持式、可移式电动工具和园林工具的安全 第3部分:可移式带液源金刚石钻的专用要求

除下述条文外，GB/T 3883.1-2014的这一章适用。增加：本部分适用于连接一个供液系统的可移式金刚石钻。供液系统包括管道供液或容器供液。

GB/T 13960.4-2009可移式电动工具的安全.第二部分:平刨和厚度刨的专用要求

除以下条文外，GB 13960.1的这一章适用。第一段增加：本标准适用于大刨削宽度为260mm的可移式平刨和厚度刨。

GB/T 13960.10-2009可移式电动工具的安全.第二部分:单轴立式木铣的专用要求

除以下条文外，GB 13960.1的这一章适用。第一段增加：本标准适用于大刀轴直径为180mm的可移式单轴立式木铣。

GB/T 13960.13-2005可移式电动工具的安全 第2部分;斜切割台式组合锯的专用要求

本部分适用于如2.101所定义的，锯片直径不大于350mm，用以锯割有色金属材料，诸如铝、木材或类似材料的斜切割台式组合锯。

GB 19517-2009电气设备安全技术规范

本标准适用于交流额定电压1200V以下、直流额定电压1500V以下的各类电气设备。本标准不适用于：本规范规定的电气设备的材料和辅助材料除外;不能独立使用的半成品或初级产品;用于医疗目的的电气设备;爆炸环境中使用的电气设备;电梯;电栅栏激发器;船舶、飞行器和铁路等特殊电气设备。

DIN EN 14886-2008塑料和橡胶机械.块状泡沫塑料用带刀切削机.安全要求

This European standard applies to machines that are designed specifically to cut, split or peel block foams tocommercially required shapes, using a single or double cut.All hazards listed in clause 4 are covered by this document.Cutting of block foams may be by:-- vertical cutting;-- horizontal cutting;-- inclined cutting;-- transverse cutting;-- contour cutting; or-- a combination of the above.The material to be cut may be supported or transported by:-- a fixed table;-- a shuttle table;-- a conveyor;-- a turntable;-- rollers;-- mandrel; or-- a combination of the above.Cutting can be either manual or automatic.Cutting tools can be:-- smooth-edged or toothed bandknives;-- cutting wires.Movement of the cutting tool can be either oscillating or continuous in one direction.This European Standard does not apply to:-- laser and water jet cutting;-- hot wire cutting;-- wood, metal and food cutting machines.The safety requirements for the additional hazards arising from the interaction between bandknife cuttingmachines and ancillary equipment, especially loading and unloading devices, are specified. The safetyrequirements for the ancillary equipment itself are not specified.This European Standard covers machines used for cutting plastics and rubber having a cellular or compactstructure. However, it may also be applied when these machines are used for cutting other materials, forexample textiles, fibres and mineral wool, if cutting these materials does not create additional hazards.This document is not applicable to bandknife cutting machines manufactured before the date of its publicationas an EN.

BS EN 14886-2008橡胶和塑料机械.块状塑料泡沫用带刀切削机.安全要求

This European standard applies to machines that are designed specifically to cut, split or peel block foams tocommercially required shapes, using a single or double cut.All hazards listed in clause 4 are covered by this document.Cutting of block foams may be by: vertical cutting; horizontal cutting; inclined cutting; transverse cutting; contour cutting; or a combination of the above.The material to be cut may be supported or transported by: a fixed table; a shuttle table; a conveyor; a turntable; rollers; mandrel; or a combination of the above.Cutting can be either manual or automatic.Cutting tools can be: smooth-edged or toothed bandknives; cutting wires.Movement of the cutting tool can be either oscillating or continuous in one direction.This European Standard does not apply to: laser and water jet cutting; hot wire cutting; wood, metal and food cutting machines.The safety requirements for the additional hazards arising from the interaction between bandknife cuttingmachines and ancillary equipment, especially loading and unloading devices, are specified. The safetyrequirements for the ancillary equipment itself are not specified.This European Standard covers machines used for cutting plastics and rubber having a cellular or compactstructure. However, it may also be applied when these machines are used for cutting other materials, forexample textiles, fibres and mineral wool, if cutting these materials does not create additional hazards.This document is not applicable to bandknife cutting machines manufactured before the date of its publicationas an EN.