气雾上光剂检测

气雾上光剂检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 13962-2009光学仪器术语

本标准规定了光学基本术语,几何光学、物理光学、像质评定、光学零部件及工艺、光学仪器名称、光学测量及产品技术要求等方面的术语共1028条。 本标准适用于光学仪器标准制定、技术文件编制、教材和书刊编写及文献翻译等。

GB/T 15732-1995汉字键盘输入用通用词语集

本标准规定了汉字键盘输入用通用词语。 本标准适用于汉字键盘输入、方案优化和评测。中文信息处理的其他领域也可参照执行。

GB 51145-2015煤矿电气设备安装工程施工与验收规范

本规范适用于煤矿建设电气设备安装工程的施工及验收。

GBZ/T 224-2010职业卫生名词术语

本标准规定了职业卫生术语的分类和定义或含义。本标准适用于职业卫生工作，特别是职业卫生标准的编写和实践。

MT 5010-1995煤矿安装工程质量检验评定标准

本标准适用于煤矿矿井及选煤厂的工业设备、钢结构井架、井筒装备、工作压力小于和等于10MPa的工业管道、小于和等于110kV的电气装置、通信、集控和架空索道等安装工程的质量检验评定。本标准主要是根据颁发的有关技术标准和施工验收规范并参照行业有关规范、标准等编制的。本标准未包括的工程项目及设备,建设单位可组织设计、施工单位按照本标准的制定原则,根据设计文件及设备出厂技术文件的要求自行补充临时标准,经省、市、自治区煤炭主管部门批准后执行,并报煤炭工业部备案。

QB/T 2550-2002家具用气雾上光剂

本标准规定了家具用气雾上光剂的技术要求、试验方法、检验规则和标志、包装、运输、贮存。t本标准适用于以气雾剂产品用的液化石油气和/或二甲醚作为推进剂的家具用气雾上光剂。

WB/T 1052-2012木地板养护油精

本标准规定了木地板养护用木质油精的定义、技术要求、检验方法、检验规则和标志、包装、运输、储存等要求。本标准适用于以植物油、天然树脂等为原料乳化制备而成的水基质乳液制品。

DIN EN 1010-2-2011机械安全性.打印机和纸加工机的设计和构造的安全性要求.第2部分:包括预压机械的印刷机和涂漆机;德文版本EN 1010-2-2006+A1-2010

This document applies to: Pre-press machinery (machinery and devices for the production of master copies and printing forms): - exposure equipment for the production of films and printing forms; - equipment for developing films and printing forms; - washing machines for printing forms; - machines for bending printing forms; - punching machines for film and printing forms; - cutting machines for film and printing forms; - machines for the production of gravure printing forms; - scanners. Printing and varnishing machines: - proofing presses; - sheet-fed printing presses and varnishing machines including digital printing presses; - web-fed rotary presses and varnishing machines including digital printing presses; - screen printing presses. Auxiliary devices: - cylinder and roller washing devices; - continuous flow drying devices; - powder spraying devices; - auxiliary devices on inking and damping units; - automatic plate clamping devices; - washing equipment for printing forms, rollers and scrapers; - pile turners; - measuring and control devices. This document shall be used together with EN 1010-1:2004+A1. Both parts together identify all significant hazards relevant to printing and varnishing machines including pre-press machinery and auxiliary devices, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements specified in prEN 1010-2 take precedence over respecti¬ve requirements in this standard. This document does not deal with risks generated by noise emitted from the machines. These issues are fundamentally covered in EN 1010-1:2004+A1. This document does not apply to high-pressure cleaning devices and screen printing presses for textile substrates. This document is not applicable to printing and varnishing machines including pre-press machinery which are manufactured before the date of publication of this document by CEN.