家用和类似设备用互连耦合器检测

发布时间：2024-06-21 作者：中析研究所浏览：

GB 21748-2008教学仪器设备安全要求.仪器和零部件的基本要求

本标准规定了学校和培训机构课堂教学和实验室用的仪器和零部件的安全质量要求以及机械性能、高温和低温、噪声和振动、电离辐射、非电离辐射和电气安全的附加要求。本标准仅涉及教学仪器零部件的安全而不涉及其他特性，如式样和特性。本标准适用于学校和培训机构课堂教学和实验室用的仪器和零部件。

SN/T 3532-2013进出口家用和类似用途电器的安全技术要求通用要求

本标准规定了进出口家用和类似用途电器的通用安全要求。本标准涉及了单相器具额定电压不超过250 V、其他器具额定电压不超过480 V的家用和类似用途电器的安全。不打算作为一般家用但仍可能对公众构成危险的器具，例如在商店、轻工业以及农场中打算由非人员使用的器具，也包括在本标准的范围内。注1：这种器具的示例为：工业和商业用炊事设备、清洁器具以及理发师使用的器具。就实际情况而言，本标准涉及在住宅内和住宅周围所有人员可能遇到的由器具产生的公共危险。然而，本标准通常不考虑：--以下类型的人(包括儿童)：·其身体、感官或精神方面的能力，或·在经验和知识方面的缺乏使得他们在没有受到监督或指导的情况下无法安全地使用器具；--儿童玩耍器具的情况。注2:注意以下事实：--对于打算用在车辆、船舶或飞机上的器具，可能需要附加要求；--在许多中，性的卫生保健部门、性劳动保护部门、性供水管理部门以及类似的部门都对器具规定了附加要求。本标准不适用于：--专为工业用途设计的器具；--打算用在有腐蚀性或爆炸性气体(如粉尘、蒸汽或可燃气)的特殊环境场所的器具；--音频、视频和类似电子设备(IEC 60065)；--医用电气设备(IEC 60601)；--手持式电动工具(IEC 60745)；--个人电脑及类似设备(IEC 60950)；--可移动式电动工具(IEC 61029)。

JS 60320-2-2-2011家用和类似一般用途的电器用耦合器.第2-2部分:家用和类似设备用互连耦合器

This standard is applicable to two-pole interconnection couplers for a.c only with without earthing contact with a rated voltage not exceeding 250 V and a rated current not exceeding 16 A, for household and similar appliances and equiment and intended for the unterconnection of the electrical supply to electrical appliances or equipment for 50 Hz or 60 Hz supply .

TS EN 60320-2-2-2005家用和类似一般用途的器具耦合器. 第2-2部分: 家用和类似设备用互连耦合器

This standard is applicable to two-pole interconnection couplers for a.c.only,with and witthout earthing contact, with a rated voltage not exceeding 250 V and rated current not exceeding 15 A, for household and similar appliances and equipment and intended for the interconnection of the electrical supply to electrical appliances or equipment for 50 hz or 60hz supply.

AS/NZS 60320.2.2-2004 (R2016)家用和类似一般用途电器耦合器.家用和类似设备用互连耦合器（IEC 60320-2-2，Ed.2.0（1998）MOD）

Specifies essential safety and associated requirements for two-pole interconnection couplers for a.c. only, with or without an earthing contact and having a rated voltage not exceeding 250 V and a rated current not exceeding 16？A. The couplers are intended for the interconnection of the electrical supply to electrical appliances or equipment. Annex？ZZ lists variations for Australian and New Zealand conditions.nRECONFIRMATION NOTICEnTechnical Committee EL-004 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.nCertain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.nApproved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 23 December 2015.nApproved for reconfirmation in New Zealand on behalf of the Standards Council of New Zealand on 18 May 2016.nThe following are represented on Technical Committee EL-004:nAssociation of Accredited Certification BodiesnAustralian Chamber of Commerce and IndustrynAustralian Industry GroupnConsumer Electronics Suppliers AssociationnConsumers Federation of AustralianElectrical Compliance Testing AssociationnElectrical Regulatory Authorities CouncilnEngineers AustralianInternational Accreditation New ZealandnNew Zealand Manufacturers and Exporters AssociationnNSW Fair TradingnPlastics Industry Pipe Association of AustralianWorksafe New Zealand