家用钢制锅具检测

家用钢制锅具检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 3883.1-2014手持式、可移式电动工具和园林工具的安全 第1部分:通用要求

GB 3883的本部分涉及电动机或电磁铁驱动的:--手持式电动工具(第2部分);--可移式电动工具(第3部分);--园林工具(第4部分)。以下简称“工具”。交流单相或直流工具的额定电压不大于250 V,交流三相工具的额定电压不大于440 V。大额定输入功率不超过3 700 W。本部分涉及人们在正常操作以及合理可预见的使用工具时遇到的由工具引发的危险。带电加热元件的工具属本部分范围。这些加热元件的要求在GB 4706的相关部分中规定。对于不与电网隔离、且基本绝缘由不按工具额定电压设计的电动机,其要求在附录B中规定。对于由可充电电池供电的电动机驱动或电磁铁驱动的工具以及用于这些工具的电池包,其要求在附录K中规定。对于能直接接在市电或非隔离电源上操作和/或充电的这类工具,其要求在附录L中规定。不用对工具自身作任何改造便能够安装到一个支架或工作台当作固定式工具使用的手持式电动工具属于本部分范围,由第3部分来规定。本部分不适用于:--在爆炸性环境(尘埃、蒸汽或气体)中使用的工具;--制备和加工食品用工具;--医疗用工具;--与化妆品和药品一起使用的工具;--加热工具;--电动机驱动的家用或类似用途电器;--工业机床用电气设备;--用来制作模型的由低压变压器驱动的小型台式工具,如制作遥控飞机模型或汽车模型等。

GB/T 32432-2015家用钢制锅具

本标准规定了家用钢制锅具(以下简称锅具)的术语和定义、产品分类、要求、试验方法、检验规则、标志、标签、使用说明书及包装、运输、贮存。本标准适用于以碳素钢板为基材加工成型的家用锅具。本标准不适用于不粘涂层钢制锅具。

CJ/T 28-2013中餐燃气炒菜灶

本标准规定了以城镇燃气为燃料的中餐燃气炒菜灶的术语和定义、分类和型号，结构和材料，要求，试验方法，检验规则，标识、警示和使用说明书以及包装、运输和贮存。本标准适用于每个燃烧器额定热负荷不大于60kW的中餐燃气炒菜灶（以下简称炒菜灶）。本标准所指城镇燃气为符合GB/T 13611的燃气。

CJJ 94-2009城镇燃气室内工程施工与质量验收规范

为统一城镇燃气室内工程的施工与质量验收，保证城镇燃气室内工程的施工质量，确保安全供气，制定本规范。本规范适用于供气压小于或等于0.8MPa（表压）的新建、扩建和改建的城镇居民住宅、商业用户、燃气锅炉房（不含锅炉本体）、实验室、工业企业（不含用气设备）等用户室内燃气管道和用气设备安装的施工与质量验收。

QB/T 1237-2012电炒锅

本标准规定了电炒锅的的术语和定义、器具分类和型号命名、要求、试验方法、检验规则、标志、包装、运输、贮存。本标准适用于额定电压不超过250 V、额定功率不超过2 000 W的家用和类似用途电炒锅。

WS/T 118-1999卫生行业药疗器械、仪器设备(商品、物资)分类与代码

本标准规定了卫生行业医疗器械、仪器设备（商品、物资）的分类与代码。 本标准适用于卫生行业各医疗、教学、科学研究和生物制品等单位对物资管理、计划、统计及会计业务等使用。

YC/T 384.2-2018烟草企业安全生产标准化规范 第2部分:安全技术和现场规范

YC/T 284的本部分规定了烟草企业安全生产标准化的安全技术和现场规范要求，包括设备设施、作业活动、作业环境和现场运行的安全要求。本部分适用于省级烟草公司(局)、省级工业公司等省级公司、烟草加工和烟草商业生产经营单位。其中，烟草商业生产经营单位特指地市级烟草公司，烟草加工单位含烟叶复烤、卷烟制造、雪茄烟制造、再造烟叶生产的单位。烟草配套和多元化投资的其他生产经营单位，如醋酸纤维、烟草印刷等单位可参照执行。

DB11/T 512-2007建筑装饰工程石材应用技术规程

本规程适用于建筑装饰工程中装饰石材的材料、设计、加工制作、施工、验收以及防护、保养和翻新。

DB11/T 301-2005燃气室内工程设计施工验收技术规定

本规定适用于北京市居民生活、商业及工业企业生产、采暖通风和空调使用的天然气、气态液化r石油气、人工煤气作燃料的新建、扩建、改建燃气室内工程的设计、施工及验收

UL 399-2008饮用水冷却器

1.1 These requirements cover self-contained drinking-water coolers which employ hermetic refrigerantmotor-compressors and which are designed for connection to alternating-current circuits rated not greaterthan 600 volts in accordance with the National Electrical Code, NFPA 70. The requirements also apply towater coolers which supply both hot and cold water.1.2 These requirements do not include additional requirements applicable to equipment designed for usein hazardous locations as defined in the National Electrical Code, NFPA 70.1.3 A product that contains features, characteristics, components, materials, or systems new or differentfrom those covered by the requirements in this standard, and that involves a risk of fire, electric shock, orinjury to persons shall be evaluated using the appropriate additional component and end-productrequirements as determined necessary to maintain the acceptable level of safety as originally anticipatedby the intent of this standard. A product whose features, characteristics, components, materials, orsystems conflict with specific requirements or provisions of this standard cannot be judged to comply withthis standard. Where considered appropriate, revision of requirements shall be proposed and adopted inconformance with the methods employed for development, revision, and implementation of this standard.

BS 5440-1-2008额定热输入不超过70kW的燃气器具用烟道及通风设备(第1、2和3类家用燃气).烟囱燃气器具的安装和烟囱的维修用规范

This part of BS 5440 specifies requirements for the installation of gasappliances to chimneys, chimney installation work likely to beundertaken by gas engineers and operatives working under UK gasindustry conditions and requirements for the maintenance of chimneys.It is applicable to open flue chimneys for Type B gas appliances androom-sealed chimney configurations for Type C gas appliances, each ofrated input not exceeding 70 kW net (see Note 2 and Note 3), burning1st, 2nd or 3rd family gases. It applies to chimneys of the naturaldraught or fanned draught type and is applicable to open flue chimneysand room-sealed chimneys supplied with the appliance as well as tothose supplied separately.It complements the requirements for the design, installation andcommissioning of chimneys as required in BS EN 15287-1 andBS EN 15287-2 and requires extra details that are specific to the UK gasindustry. This is kept in perspective by quoting some details ofBS EN 15287-1 and BS EN 15287-2.It specifies the following:• requirements for the selection of the appropriate flueing option forgas appliances in the UK;• requirements for the installation of gas appliances to newchimneys, or chimney configurations;• requirements for the installation of gas appliances to existingchimneys or chimney configurations;• requirements for the installation of appliances which carry a CEmark and for which the manufacturer’s instructions are availableto the installer;• requirements installation of appliances which do not carry a CEmark and used/second-hand appliances for which themanufacturer’s instructions are available to the installer.This part of BS 5440 is applicable to:• complete chimney and all chimney components from the applianceconnection to the discharge point into outside air;• the installation of gas appliances to existing chimneys that wereintended originally for appliances burning other fuels;• chimneys for residential park homes but not to chimneys forleisure accommodation vehicles.This part of BS 5440 is not applicable to gas-fired incinerators. Refer toBS 5871-3 for the installation of decorative fuel effect appliances.This part of BS 5440 includes compatibility of appliances installed inthe UK with new chimneys designated under BS EN 1443 and withexisting chimneys, including non-designated chimneys.