变速球型摄像机检测

发布时间：2024-06-21 作者：中析研究所浏览：

GB/T 12763.6-2007海洋调查规范第6部分:海洋生物调查

GB／T l2763的本部分规定了海洋生物调查的一般规定、技术要求和调查（测定）要素、采样、样品分析及资料整理的基本要求和方法。本部分适用于海洋环境基本要素调查中的海洋生物调查。

GB/T 15732-1995汉字键盘输入用通用词语集

本标准规定了汉字键盘输入用通用词语。本标准适用于汉字键盘输入、方案优化和评测。中文信息处理的其他领域也可参照执行。

GB/T 17229-1998大洋多金属结核矿产勘查规程

本标准规定了大洋多金属结核调查的基本内容、方法、样品测试和处理、试验测试技术和调查成果等技术内容。本标准适用于大洋多金属结核勘查和室内的测试，对某些如铁锰结壳的调查也可参照使用。

GB/T 34348-2017电站锅炉技术条件

本标准规定了电站锅炉本体、燃烧系统、汽水系统、烟风系统和灰渣系统等的设计及设备配置技术要求，以及节能和环保的指标和要求。本标准适用于额定蒸汽压力≥3.8 MPa的燃煤、燃油、燃气的电站锅炉。其他电站锅炉可参照执行。

GB 37300-2018公共安全区域视频图像信息采集规范

本标准规定了公共安全区域视频图像信息采集部位和采集种类、技术要求和采集设备要求。本标准适用于公共安全视频监控联网系统中公共区域和行业、领域涉及公共区域的视频图像信息采集与管理。

GB 50215-2015煤炭工业矿井设计规范

本规范适用于设计生产能力0.09Mt/a及以上的新建、改建及扩建的煤炭工业矿井的初步可行性研究、可行性研究和设计。

GB 50350-2015油田油气集输设计规范

本规范适用于陆上油田、滩海陆采油田和海上油田陆岸终端油气集输工程设计。

CJJ 68-2016城镇排水管渠与泵站运行、维护及安全技术规程

本规程适用于城镇排水管渠与泵站的运行和维护。

GA/T 645-2014安全防范监控变速球型摄像机

本标准规定了安全防范视频监控系统中变速球型摄像机的分类及标识、技术要求、试验方法、检验规则和标志、包装、运输、贮存等技术要求。本标准适用于安全防范视频监控系统中的变速球型摄像机。

GA/T 1127-2013安全防范视频监控摄像机通用技术要求

本标准规定了安全防范视频监控摄像机的分类与标识、技术要求、试验方法、检验规则、标志、包装、运输和贮存等技术要求。本标准适用于安全防范视频监控系统中使用的摄像机，其他领域应用的摄像机可参考采用。

JTS 257-2008水运工程质量检验标准

本标准适用于港口工程、航道工程和修造船厂水工建筑物工程等水运工程质量的检验。

DIN EN 62388-2014海上导航和无线电通信设备及系统.船用雷达.性能要求、测试方法和要求的试验结果(IEC 62388-2013).英文版本EN 62388-2013

This standard specifies the minimum operational and performance requirements, methods of testing and required test results for shipborne radar installations.

DIN EN ISO 14880-4-2006光学和光子学.显微物镜系列.第4部分:几何学特征的试验办法(ISO 14880-4-2006)

This standard specifies methods for testing geometrical properties of microlenses in microlens arrays. It is applicable to microlens arrays with very small lenses formed on one or more surfaces of a common substrate and to graded index microlenses.

DIN EN ISO 19901-4-2017石油和天然气工业.海上建筑物的特殊要求.第4部分:土工和地基设计考虑(ISO 19901-4-2016);英文版本EN ISO 19901-4-2016,只在CD-ROM

This part of ISO 19901 contains provisions for those aspects of geoscience and foundation engineering that are applicable to a broad range of offshore structures, rather than to a particular structure type. Such aspects are: - site and soil characterization; - identification of hazards; - design and installation of shallow foundations supported by the seabed; - design and installation of pile foundations; - soil-structure interaction for auxiliary structures, e. g. subsea production systems, risers and flowlines (guidance given in A.10); - design of anchors for the stationkeeping systems of floating structures (guidance given in A.11). Particular requirements for marine soil investigations are detailed in ISO 19901-8. Aspects of soil mechanics and foundation engineering that apply equally to offshore and onshore structures are not addressed. The user of this part of ISO 19901 is expected to be familiar with such aspects.

DIN EN ISO 19901-7-2013石油和天然气工业.海上建筑物的专门要求.第7部分:浮动式海上建筑物和移动式海上设备的定位系统(ISO 19901-7-2013).英文版本EN ISO 19901-7-2013,仅为CD-ROM

This part of ISO 19901 specifies methodologies for a) the design, analysis and evaluation of stationkeeping systems for floating structures used by the oil and gas industries to support 1) production, 2) storage, 3) drilling, well intervention and production, 4) production and storage, 5) drilling, well intervention, production and storage, and b) the assessment of stationkeeping systems for site-specific applications of mobile offshore units (e. g. mobile offshore drilling units, construction units, and pipelay units). Most stationkeeping systems used with the class of floating structures covered by a) are termed "permanent mooring systems", for which this part of ISO 19901 is applicable to all aspects of the life cycle and includes requirements relating to the manufacture of mooring components, as well as considerations for in-service inspections. Most stationkeeping systems used with mobile offshore units, the class covered by b), are termed "mobile mooring systems". Throughout this document, the term "floating structure", sometimes shortened to "structure", is used as a generic term to indicate any member of the two classes, a) and b). This part of ISO 19901 is applicable to the following types of stationkeeping systems, which are either covered directly in this document or through reference to other guidelines: - spread moorings (catenary, taut-line and semi-taut-line moorings); - single point moorings, anchored by spread mooring arrangements; - dynamic positioning systems; - thruster-assisted moorings. Descriptions of the characteristics and of typical components of these systems are given in Annex A.

BS EN 61189-6-2006电气材料、互连结构和组件的试验方法.生产电子组件用材料的试验方法

This part of IEC 61189 is a catalogue of test methods representing methodologies andprocedures that can be applied to materials used in manufacturing electronic assemblies.