金属手铐检测

GB/T 15732-1995汉字键盘输入用通用词语集

本标准规定了汉字键盘输入用通用词语。 本标准适用于汉字键盘输入、方案优化和评测。中文信息处理的其他领域也可参照执行。

GA 172-2014金属手铐

本标准规定了金属手铐的术语和定义、分类和代号、技术要求、试验方法、检验规则、包装、运输和贮存。本标准适用于金属手铐的研发、生产和检验。

GA 890-2018公安单警装备 多功能腰带

本标准规定了公安单警装备多功能腰带的术语和定义、分类和编号、技术要求、试验方法、检验规则、包装、标志、运输与贮存。本标准适用于以尼龙机织带为主要材料，具有内带和斜挂带，悬挂放置多种装具套的公安单警装备多功能腰带产品的生产、检验与验收。

GA 915-2010讯问椅

本标准规定了讯问椅的术语和定义、代号、技术要求、试验方法、检验规则和标志、包装、运输及贮存。本标准适用于讯问椅。

GA 1033-2013公安监管场所装备建设和保障规范

本标准规定了公安监管场所装备建设和保障工作的基本要求。本标准适用于公安监管场所装备的规划、建设、使用、维护、保障和管理工作。

GA/T 1410-2017出所就医防脱逃系统

本标准规定了出所就医防脱逃系统的术语和定义、分类、代号和编号、技术要求、试验方法、检验规则、标志、包装、运输及贮存。本标准适用于公安监管场所出所就医防脱逃系统。

GA 1512-2018公安单警装备 金属手铐

本标准规定了公安单警装备金属手铐的术语和定义、编号、技术要求、试验方法、检验规则、包装、标志、运输与贮存。本标准适用于公安单警装备金属手铐产品的生产、检验和验收。

EN 13889-2003一般提升用锻钢带销U形环.固定D形环钩和弓形环钩.6级.安全要求.包含修改件A1-2008

This European Standard specifies requirements for forged steel Dee and bow shackles of grade 6 for general lifting purposes in a range of working load limits 0,5 t to 25 t maximum. This standard applies only to those shackles with threaded pins. Annex A gives information on the safe use of shackles, annex B gives information on types of pins, and annex C gives an example of a designation system for forged steel shackles. The hazards covered are identified in clause 4.

EN ISO 13628-2-2006石油天然气工业.海底生产系统设计和操作.第2部分:海底和船用自由软管系统

This part of ISO 13628 defines the technical requirements for safe, dimensionally and functionally interchangeable flexible pipes that are designed and manufactured to uniform standards and criteria. Minimum requirements are specified for the design, material selection, manufacture, testing, marking and packaging of flexible pipes, with reference to existing codes and standards where applicable. See ISO 13628-11 for guidelines on the use of flexible pipes and ancillary components.This part of ISO 13628 applies to unbonded flexible pipe assemblies, consisting of segments of flexible pipe body with end fittings attached to both ends. This part of ISO 13628 do

EN ISO 13628-5-2009石油和天然气工业.水下采油系统的设计和操作.第5部分:海底缆线

This International Standard specifies the general, and some of the special, requirements on materials used for the construction of equipment used in gas welding, cutting and allied processes.

EN ISO 19901-6-2009石油和天然气工业.海上建筑物的详细要求.第6部分:船舶管理

This part of ISO 19901 provides requirements and guidance for the planning and engineering of marine operations, encompassing the design and analysis of the components, systems, equipment and procedures required to perform marine operations, as well as the methods or procedures developed to carry them out safely.

NF E52-141-2009一般提升用锻造钢钩环.D形钩环和弓形钩环.6级.安全性

La présente Norme européenne spécifie les prescriptions relatives aux manilles droites et aux manilles lyres forgées en acier de classe 6 pour les applications générales de levage ayant des charges maximales d'utilisation comprises entre 0,5 t et 25 t maximum.La présente norme s'applique uniquement aux manilles ayant des axes filetés.L'Annexe A donne des informations sur l'utilisation sûre des manilles, l'Annexe B donne des informations sur les types d'axes, et l'Annexe C donne un exemple d'un système de désignation pour les manilles forgées en acier. Les phénomènes dangereux couverts sont identifiés à l'article 4.

NF M87-208-11-2008石油和天然气工业.水底生产系统的设计和运行.第11部分:海底和海上设备用软管系统

La présente partie de l'ISO 13628 fournit des lignes directrices pour la conception, l'analyse, la fabrication, les essais, la pose et l'exploitation des canalisations flexibles et des systèmes de canalisations flexibles pour les applications terrestres, sous-marines et en milieu marin. La présente partie de l'ISO 13628 vient en complément de l'ISO 13628-2 et de l'ISO 13628-10 qui spécifient respectivement les exigences minimales relatives à la conception, au choix des matériaux, à la fabrication, aux essais, au marquage et au conditionnement des canalisations flexibles non collées et composites.La présente partie de l'ISO 13628 s'applique aux ensembles de canalisations flexibles constitués de tronçons de corps de canalisations flexibles munis de pièces d'extrémité fixées aux deux extrémités. Les canalisations composites et les canalisations non collées sont couvertes. En outre, la présente partie de l'ISO 13628 s'applique aux systèmes de canalisations flexibles, y compris les composants auxiliaires.Les applications couvertes par la présente partie de l'ISO 13628 sont la production de fluides non corrosifs et corrosifs, y compris les applications d'exportation et d'injection. La présente partie de l'ISO 13628 s'applique aux systèmes de canalisations flexibles statiques et dynamiques utilisés comme goulottes, colonnes montantes et tuyaux de raccordement. La présente partie de l'ISO 13628 couvre, en termes généraux, l'utilisation de canalisations flexibles pour les systèmes de chargement en mer.La présente partie de l'ISO 13628 ne couvre pas les canalisations flexibles destinées à être utilisées dans les lignes de duse et dans les conduites d'injection ou dans les ombilicaux et dans les lignes de commande.

BS 6349-8-2007海工建筑物.滚装斜坡道、连桥和人行道设计实施规程

This part of BS 6349 gives recommendations for the design ofroll-on/roll-off (Ro-Ro) ramps, linkspans and walkways, used for thetransfer of passengers and vehicles between shore and ship.It applies to the structural elements only and does not cover the designof any operational equipment, traffic control, mechanical or electricalequipment, heating, lighting, life saving or rescue equipment other thanas the structures forming a facility need to incorporate and/or supportany of these features. Most geometrical aspects of fixed shore ramps arecovered in this part of BS 6349, but recommendations for all otheraspects are given in BS 6349-2.This part of BS 6349 does not apply to Ro-Ro facilities used by railvehicles in that it does not give recommendations for railway loadingand associated ramp gradients. However, many of its recommendationsare applicable to rail Ro-Ro facilities and can be used in the absence ofother guidance.NOTE This part of BS 6349 is generally intended to cover facilitiesconstructed in the British Isles. Although the majority of the contents aredirectly applicable elsewhere, local conditions might necessitatemodifications, e.g. environmental effects and traffic loading.

BS 6739-2009过程控制系统仪表的实施规范:安装设计和实施

This British Standard gives recommendations for, and guidance on,the design for the installation of instrumentation of measurementand control systems in the process industry, and the implementationand commissioning of this installation. It is intended to be used asa manual of good practice on the site and also to assist those whodesign the installation.

BS 7121-4-2010起重机安全使用实施规程.卡车式装载机

This part of BS 7121 gives recommendations for the safe use of lorryloaders. Subjects covered include management, selection of equipment,selection and training of personnel, procedures and precautions,testing, inspection, maintenance and examination.This part of BS 7121 is intended to be used in conjunction withBS 7121-2, which provides general guidance on the inspection, testingand examination of all types of cranes.

BS 7121-13-2009起重机安全使用实施规程.第13部分:液压龙门吊装系统

This part of BS 7121 gives recommendations for the safe use of hydraulicgantry lifting systems (HGLS). Subjects covered include safe systemsof work, management, planning, selection, erection and dismantling,inspection, testing, examination, training, operation and maintenance.NOTE 1 This part of BS 7121 has been developed along the lines ofBS 7121-1 with significant modifications to incorporate HGLS-specificaspects. The modifications include some information contained in theUS Specialized Carriers and Rigging Association (SC&RA) document,Recommended Practices for Hydraulic Jacking Systems [6].This part of BS 7121 is intended to be used in conjunction withBS 7121-2, which provides general guidance on the inspection, testingand examination of all types of cranes.NOTE 2 Annex A and Annex B give detailed recommendations on thetraining of HGLS personnel. Annex C provides background information onthe BS 7121 series.

BS EN 12195-4-2003道路车辆上负荷系固组件.安全性.第4部分:捆绑钢丝绳

This Part 4 of EN 12195¾ specifies safety requirements for lashing steel wire ropes and flat lashing steel wire ropes and lashingcombinations with lashing steel wire ropes for the safe surface transport of loads on load carriers, e.g. trucksand trailers which are used on roads or located on vessels or on rail wagons and/or combinations thereof;¾ stipulates procedures for testing lashing steel wire ropes and flat lashing steel wire ropes;¾ deals with hazards which could occur when lashing steel wire ropes and flat lashing steel wire ropes are in use as intended and under conditions foreseen by the manufacturer (see clause 4 and annex A).

BS EN 13889-2003+A1-2008一般提升用锻钢卸扣.D形和弓形卸扣.6级.安全性

This European Standard specifies requirements for forged steel Dee and bow shackles of grade 6 for general liftingpurposes in a range of working load limits 0,5 t to 25 t maximum.This standard applies only to those shackles with threaded pins.Annex A gives information on the safe use of shackles, annex B gives information on types of pins, and annex Cgives an example of a designation system for forged steel shackles.The hazards covered are identified in clause 4.