室内装饰品检测

CNS 15102-2015纺织品－生理舒适性－稳态条件下热阻及湿阻之量测法(流汗保热板试验)

本标准规定如服饰、被褥、睡袋、室内装饰品等纺织品及纺织相关产品所用之织物、薄膜、涂层、泡棉与皮革，包含多层组合件，在稳态条件下热阻及湿阻之量测方法。备考1. 本量测技术之应用，取决于使用设备尺度与结构之大热阻及湿阻的限制(例：本标准中所述设备之小规格分别为2 m2?K/W与700 m2?Pa/W)。备考2. 本标准中所用试验条件，不代表特定舒适性情况，亦未规定生理舒适性有关之性能规格。

NF D80-001-3-2008棺材.棺材使用的合适度检测用性能规范.第3部分:棺材的特性和焚化的要求

Le présent document a pour objet de définir l'aptitude à la crémation de tous les matériaux constituant la structure des parois de la caisse, du fond et du couvercle, des quincailleries d'assemblage ainsi que les accessoires et les capitons d'un cercueil.Le présent document ne s'applique pas au bois massif ou panneauté d'épaisseur nominale supérieure ou égale à 18 mm, associé ou non à une opération de plaquage, exempt de produits de traitement car un tel bois, quelle que soit l'essence, est un matériau satisfaisant pour la crémation.Pour tous les autres matériaux, l'aptitude à la crémation est appréciée conformément aux spécifications de la présente norme.Le présent document concerne tous les types de cercueils à l'exclusion de l'enveloppe étanche du cercueil hermétique (3.2).Les produits absorbants sont exclus de la présente norme.

DIN 55405-2014包装.术语.术语和定义

Taking into account the technical language and the language used in practice this standard specifies uniform terms and definitions in the field of packaging.

DIN 68707-2016家具用成型胶合板和叠层木板. 尺寸要求和质量特征

This standard specifies requirements for dimensions and quality features of moulded plywood and laminated wood of all wood species for all types of furniture. This standard does not apply to moulded plywood and laminated wood for medical products and products for automotive manufacturing.

DIN 68871-2017家具.名称及其使用

This standard specifies designations for all kind of furniture und their use in goods traffic in case of exhibition, offer (e. g. advertisement) and selling.

DIN 68888-2009家具.座椅.家具装饰品耐久性的测定

This standrad specifies a test method for the determination of durability of upholstery complete and on the seating.

DIN 79400-2012松线式索道系统.一般和安全要求和试验方法

This standard applies to slackline systems that are installed in jump height. It specifies terms, safety requirements for the material and all the components including the mounting and the permitted load, assembly, testing, labeling and the user manual. This standard does not apply to slackline systems that are part of a safety system preventing from falling.

DIN CEN/TS 15256-2005防护服装.冰球运动用手、手臂、腿、生殖器和颈部防护设备.除守门员外的运动员用防护设备.要求和试验方法

This Technical Specification applies to personal protective equipment (excluding face and head protectors) for ice hockey players other than goal keepers. This Technical Specification specifies requirements for neck, shoulder, elbow, wrist and hand, genital, hip, coccygeal, thigh, knee and shin protectors. It specifies the cut resistance of all the protectors except those for the shoulders and elbows, and impact performance for all the protectors except the neck protector. Additionally for all protectors it specifies requirements for innocuousness, ergonomics, cleaning, restraint, zone of protection, and provisions for marking and information for users.

DIN EN 1021-1-2014家具.装璜家具可燃性的评定.第1部分:火源:炽热的香烟.德文版本EN 1021-1-2014

This European Standard specifies a test method to assess the ignitability of material combinations, such as covers and fillings used in upholstered seating, when subjected to a smouldering cigarette as an ignition source. The test measures only the ignitability of a combination of materials used in upholstered seating and not the ignitability of a particular finished item of furniture incorporating these materials. They give an indication of, but cannot guarantee, the ignition behaviour of the finished item of furniture. The standard contains four annexes: Annex A (informative) Guidance notes for designers and specifiers Annex B (informative) Model report form Annex C (informative) Cleaning of a rig Annex D (normative) Water soaking procedure

DIN EN 1021-2-2014家具.装璜家具可燃性的评定.第2部分:火源.火柴火焰等同物.德文版本EN 1021-2-2014

This European Standard specifies a test method to assess the ignitability of material combinations, such as covers and fillings used in upholstered seating, when subjected to a small flame as an ignition source. The test measures only the ignitability of a combination of materials used in upholstered seating and not the ignitability of a particular finished item of furniture incorporating these materials. They give an indication of, but cannot guarantee, the ignition behaviour of the finished item of furniture.The standard contains four annexes:Annex A (informative) Guidance notes for designers and specifiersAnnex B (informative) Model report formAnnex C (informative) Cleaning of a rigAnnex D (normative) Water soaking procedure

DIN EN 10300-2006近岸和海上管线用钢管和配件.外涂层用沥青热涂覆材料.德文版本 EN 10300-2005

This European Standard specifies requirements for the application of factory applied external bitumen based hot applied coatings for the corrosion protection of steel tubes and fittings for onshore and offshore pipelines. The coatings described in this standard can be applied to longitudinally or spirally welded tubes or to seamless tubes and fittings used for the construction of pipelines for the conveyance of liquids or gases.

DIN EN 14465-2006纺织材料.装饰织物.规范和试验方法

This standard specifies a set of properties relevant to the assessment of upholstery fabrics Tor inaoor Turnnure and the appropriate test methods to determine these properties. It also describes a matrix system to express the material properties of an upholstery fabric.This standard applies to upholstery fabrics both in domestic and public use, except when used for the seats of road or railway vehicles, boats or aeroplanes.This standard does not apply to upholstery fabrics with a coating on the wear face.

DIN EN 14931-2006病员用高压仓(PVHO).高压疗法用多位置高压室.性能、安全要求和试验

Pressure chambers for therapeutic use are required for the administration of hyperbaric oxygen therapy and for the treatment of decompression illness. These chambers are made to allow the safe administration of hyperoxic gas mixtures at pressure while avoiding the risks of fire within the chamber and of uncontrolled compression or decompression. This standard is applicable to the performance and safety requirements and their associated test methods for multi-place pressure chambers designed for pressures in excess of ambient atmospheric pressure and employed in medical installations for therapeutic purposes.

DIN EN ISO 3759-2011纺织品.测定尺寸变化试验用服装和织物样品的制备,标记和测量(ISO 3759-2011).德文版本EN ISO 3759-2011

This International Standard specifies a method for the preparation, marking and measuring of textile fabrics, garments and fabric assemblies for use in tests for assessing dimensional change after specified treatment, e.g. washing, dry cleaning, soaking in water and steaming, following the procedures in ISO 3005, ISO 7771, ISO 6330, ISO 3175 or ISO 15797. This International Standard is applicable to woven and knitted fabrics, and made-up textile articles. The procedures are not applicable to certain upholstery coverings.

DIN EN ISO 7493-2006牙科医生用椅

This standard specifies requirements, recommendations and test methods for the operator's sttol as well as requirements for the manufacturer's instructions for use and for marking and packaging. It covers also recommendations to manufacturers on the design of operator's stool. For the purposes of this standard," ""dental operator"" includes dental assistant and dental hygienists.#",#

DIN EN ISO 11092-2014纺织品.生理效应.稳态条件下耐热和耐水蒸汽性能的测量(防护热板排汗试验)(ISO 11092-2014);德文版本EN ISO 11092-2014

This International Standars specifies methods for the measurement of the thermal resistance and water vapour resistance, under steady-state conditions, of e. g. fabrics, films, coatings, foams and leather, including multilayer assemblies, for use in clothing, quilts, sleeping bags, upholstery and similar textile or textile-like products.The application of this measurement technique is restricted to a maximum thermal resistance and water vapour resistance wich depend on the dimensions and construction of the apparatus used (e. g. 2 m2K/W bzw. 700 m2Pa/W respectively, for the minimum specifications of the equipment referred to in this International Standard).The test conditions used in this standard are not intended to represent specific comfort situations, and performance specifications in relation to physiological comfort are not stated.This document (EN 31092:1993 + A1:2012) includes the amendment A1:2012 to EN 31092:1993. The subclauses 5.3 "Test enclosure" and 7.2.1 were changed and an informative annex C "Guidance on test specimen assembly for materials prone to swelling" was added.

DIN EN ISO 20109-2017同声传译.设备.要求(ISO 20109-2016);德文版本EN ISO 20109-2016

This International Standard specifies requirements for equipment used for simultaneous interpreting. It applies also to those aspects of the conference system and of the speech reinforcement system which have a direct impact on the simultaneous interpreting system. In conjunction with either ISO 2603 or ISO 4043, ISO 20108 and ISO 20109 provide the relevant requirements for the equipment needed in the interpreting booths and the quality and transmission of sound and image provided to interpreters.

DIN ISO 2267-2016表面活性剂.某些洗涤效果的评价.未染污棉对照布的制备和使用方法(ISO 2267-1986)

This International Standard specifies the characteristics of a cotton material and the preliminary treatments which are to be applied to it in Order to make it an unsoiled cotton control cloth) for the testing of certain effects of laundering.lt also defines the conditions of use of this control cloth (in the form of control test pieces) during the laundering processes which are being tested from the Point of view of the conservation of the original characteristics of the cloth.The unsoiled cotton control cloth is primarily intended to enable the laundering of white cloth to be tested. lt may be used with all detergents and all types of domestic or industrial machines designed to wash, hydroextract and dry household textile articles.The unsoiled cotton control cloth may also be used for testing the laundering of other categories of textile articles (coloured, for example).

BS 1425-1-1991床上用品、室内装饰品和其他家用制品的填充料的清洁度.羽毛/羽绒除外的填充料规范

Requirements, sampling and test methods for cleanliness of fillings and stuffings, together with their classification into used materials, materials of animal origin, new vegetable and synthetic fibres.