地理标志产品国窖1573检测

GB/T 1573-2018煤的热稳定性测定方法

本标准规定了测定煤的热稳定性的方法提要、仪器设备、样品、测定步骤、结果表述、方法精密度和试验报告。本标准适用于褐煤、无烟煤以及不粘结性烟煤。

GB/T 15730-2008电讯夹扭钳和剪切钳通用技术条件

本标准规定了电讯夹扭钳和电讯剪切钳的的技术要求、试验方法、检验规则和包装、标志、运输与贮存。本标准适用于电讯夹扭钳和电讯剪切钳（以下简称电讯钳）。本标准不适用于带电作业用的电讯钳。

GB/T 15731-2015内河旅游船星级的划分与评定

本标准规定了中华人民共和国境内内河旅游船(以下简称旅游船)星级的划分条件、服务质量和运营规范要求。本标准适用于中华人民共和国境内内河水域,具有24 h(含24 h)以上营运能力的各类旅游船。

GB/T 15732-1995汉字键盘输入用通用词语集

本标准规定了汉字键盘输入用通用词语。 本标准适用于汉字键盘输入、方案优化和评测。中文信息处理的其他领域也可参照执行。

GB 15735-2012金属热处理生产过程安全、卫生要求

本标准规定了热处理生产过程中安全、卫生的通用技术要求。本标准适用于热处理生产和为热处理生产提供生产装置以及与热处理生产有关的安全、卫生。

GB/T 15736-2016燃气轮机辅助设备通用技术要求

本标准规定了燃气轮机辅助设备的通用技术要求。本标准适用于发电用燃气轮机辅助设备的设计、制造、采购和使用。其他类型的燃气轮机可参考使用。

GB/T 15737-2014缩微摄影技术 银-明胶型缩微品的冲洗与保存

本标准规定了中期和超长期存储的缩微品制作过程中有关定影、水洗和干燥的要求以及缩微品的保存条件。本标准适用于符合GB/T 7430-1996规定的以醋酸纤维素酯、聚酯(聚乙烯对苯二甲酸酯)等为片基的常规冲洗的银-明胶型黑白胶片缩微品。本标准不适用于微泡胶片缩微品、重氮胶片缩微品、干银胶片缩微品和彩色胶片缩微品。

GB/T 15738-2008导电和抗静电纤维增强塑料电阻率试验方法

本标准规定了内部加入导电微粒或抗静电剂等而具有导电和抗静电性能的纤维增强塑料电阻率试验方法的原理、仪器和测量装置、试样、试验环境条件、试验步骤、试验结果计算及试验报告等。本标准适用于测量电阻率小于10<上标 6>Ω•m的材料，不适用于因改变表面电阻而具有导电和抗静电的材料。

JJF 1573-2016旋光仪及旋光糖量计型式评价大纲

本规范适用于分类编码为46180500的旋光仪和分类编码为46181000的旋光糖量计的型式评价。

CNS 15732-2014工业用机器人－握持式夹爪之物件处理－词汇及特性描述

本标准规定4.1.2.1所定义握持式夹爪之端效器的功能性。本标准提供物件处理及握持式夹爪之功能、结构及元件的用语。参考性质之附录A，提供握持式夹爪特性之格式。该部分可以下列方式使用。(a) 端效器制造商提供其产品特性给机器人使用者。 (b) 机器人使用者可规范其所需端效器之要求。(c) 机器人使用者可描述所欲处理之物件及其特定机器人应用上物件处理的特性。本标准亦适用于非工业用机器人定义之简易处理系统，例：取放或主从单元等。

AS_NZS 1573-1995铜和铜合金用于工程目的的电线

This Standard specifies requirements for copper and copper alloy wire for general engineering purposes supplied in forms other than straight lengths.NOTE: Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in Appendix A.

ISO 1573-1980茶叶 103℃时质量损耗的测定

The method consists in heating a test portion in an oven at 103 +/-2 degrees centigrade, to constant mass.

ISO 15730-2023

This document specifies the information to be supplied by the purchaser to the finisher, requirements and test methods for electropolishing as a means of smoothing and passivating stainless steel alloys in the S2XXXX, S3XXXX and S4XXXX series, and the precipitation hardened alloys (see ISO 15510 for information on composition).

ISO 15732-2003精细陶瓷(高级陶瓷、高级工业陶瓷).室温下用单边预裂束法(SEPB)测定块体陶瓷破裂韧性的试验方法

This International Standard describes a test method for the determination of fracture toughness of monolithic ceramic materials at room temperature by the Single Edge Precracked Beam (SEPB) method.nThis International Standard is intended for use with monolithic ceramics and whisker- or particulate-reinforced ceramics which are regarded as macroscopically homogeneous. It does not include continuous-fiber-reinforced ceramic composites.nThis International Standard is for material development, material comparison, quality assurance, characterization, reliability and design data generation.nFracture toughness values determined with other test methods cannot be interchanged with KIpb as defined in this International Standard, and may not be interchangeable with each other.nValues expressed in this International Standard are in accordance with the International System of Units (SI).

ISO 15733-2015精细陶瓷 (高级陶瓷, 高级工业陶瓷). 在大气压力和室温下陶瓷复合材料的机械性能. 拉伸性能的测定

This International Standard specifies the conditions forndetermination of tensile properties of ceramic matrix compositenmaterials with continuous fibre reinforcement at room temperatures.nThis International Standard applies to all ceramic matrixncomposites with a continuous fibre reinforcement, unidirectionaln(1D), bi-directional (2D), and tri-directional (xD, with 2n< x ≤ 3), loaded along one principal axis ofnreinforcement.nNOTE In most cases, ceramic matrix composites to be used at highntemperature in air are coated with an antioxidation coating.

ISO 15734-2001小艇 液压静力释放装置

This International Standard specifies performance and testing requirements for hydrostatic release units used in conjunction with float-free lifesaving appliances including inflatable liferafts and Emergency Position Indicating Radio Beacons (EPIRB 's). Hydrostatic release units which comply with this International Standard and which have been formally approved by the cognizant Maritime Safety Administration may be considered to comply with the 1974 Safety Of Life At Sea Convention (SOLAS 74) and the IMO Life-Saving Appliances Code, as amended.

ISO 15736-2006船舶和海上技术.信号救生设备.发生设备的试验、检查和标记

This International Standard specifies production tests, inspections, conformity assessment procedures andmarking requirements for life-saving appliances that utilize pyrotechnic devices in functioning. Specifically, itapplies to products which have been evaluated and tested in accordance with the International MaritimeOrganization (IMO) Recommendation on testing of life-saving appliances, and type approved by maritimeadministrations to the requirements of the IMO Life-Saving Appliance (LSA) Code for use on ships subject tothe requirements of the 1974 Safety of Life at Sea Convention (as amended). The basic principles may beconsidered suitable for pyrotechnic life-saving appliances manufactured to other than the IMO requirements,however this International Standard applies directly only to products for which it contains specific requirements.This International Standard does not affect the requirement in part 2, section 4 of the IMO Recommendationon testing of life-saving appliances to periodically repeat full prototype testing of pyrotechnic life-savingappliances. However, compliance with this International Standard may be taken into account byadministrations in prescribing the frequency of such tests.