便携式电气控制或调节设备检测

发布时间：2024-06-21 作者：中析研究所浏览：

GB/T 5226.33-2017机械电气安全机械电气设备第33部分:半导体设备技术条件

GB/T 5226的本部分规定了半导体设备相关的制造、测量、组装和测试的电气、电子和可编程电子设备及系统的安全要求。本部分所论及的设备是从机械电气设备的电源引入处开始的(见5.1)。本部分适用的电气设备或电气设备部件，其标称电压不超过1 000 Va.c.或1 500 Vd.c.，额定频率不超过200 Hz。对于更高的电压或频率，可能需要特殊的要求。本部分包括针对电气安全隐患的防护措施和针对非电气安全隐患的电气联锁保护电路，但不涵盖由其他标准或法规规定的对人身安全保护的所有要求(如化学品危险、机械危险、辐射危害)。每种类型的机械适应其特定要求以提供足够的安全。下列半导体制造设备的电气装置应提供附加和特殊技术要求：——使用、加工或生产易爆材料；——在易燃易爆环境中使用；——当生产或使用某种材料时有特殊风险；——作为起重机械(包括在IEC 60204-32)。本部分不包括半导体设备的性能或功能特性规范。本部分不涉及对人类健康可能造成影响的源于半导体设备的排放(如电磁场，噪声)。本部分没有规定电磁兼容性(EMC)的要求。

GB/T 51188-2016建筑与工业给水排水系统安全评价标准

本标准适用于新建、扩建、改建和既有建筑与工业的给水排水系统安全评价。本规范不适用于军工等特殊行业建筑与工业的给水排水系统安全评价。

AS_NZS 3197-2005认证和测试规范便携式电气控制或调节设备

This Standard specifies essential safety requirements for portable electrical control or conditioning devices as defined in Clause 4 below, which are designed for operation at low voltage and which have a maximum operating current not exceeding 20 A.Typical examples of devices having a control or conditioning function are those which incorporate energy regulators, speed controllers, timing devices, photoelectric devices, devices actuated by sound or radiofrequency, devices actuated by signals or impulses generated remotely by manual or automatic means, movement detectors, lighting dimmers, temperature-sensitive devices, overcurrent protection devices of either the manual or automatically resetting type, voltage/frequency conditioning devices and filtering devices.Plugs complying with AS/NZS 3112, cord extension sockets complying with AS/NZS 3120, socket-outlet adaptors complying with AS/NZS 3122 and cord extension sets complying with AS/NZS 3199, which incorporate control or conditioning functions are within the scope of this Standard.This Standard does not apply to the following:(a) Control or conditioning devices which are incorporated in an appliance.(b) Portable residual current (earth-leakage) devices within the scope of AS/NZS 3190.(c) Portable devices incorporating voltage transformation within the scope of the AS/NZS 61558 (all parts).(d) Appliance connectors incorporating control facilities within the scope of AS/NZS 60320.1.(e) Plugs complying with AS/NZS 3112, cord-extension sockets complying with AS/NZS 3120 and socket-outlet adaptors complying with AS/NZS 3122 which incorporate indicating devices, e.g. neons, light-emitting diodes.(f) Plugs complying with AS/NZS 3112 incorporating fuses.(g) Electrical portable outlet devices complying with AS/NZS 3105.NOTE: Thermostats and energy regulators of the self-contained type but intended for independent mounting are within the scope of AS/NZS 3161.

UL 399-2008饮用水冷却器

1.1 These requirements cover self-contained drinking-water coolers which employ hermetic refrigerantmotor-compressors and which are designed for connection to alternating-current circuits rated not greaterthan 600 volts in accordance with the National Electrical Code, NFPA 70. The requirements also apply towater coolers which supply both hot and cold water.1.2 These requirements do not include additional requirements applicable to equipment designed for usein hazardous locations as defined in the National Electrical Code, NFPA 70.1.3 A product that contains features, characteristics, components, materials, or systems new or differentfrom those covered by the requirements in this standard, and that involves a risk of fire, electric shock, orinjury to persons shall be evaluated using the appropriate additional component and end-productrequirements as determined necessary to maintain the acceptable level of safety as originally anticipatedby the intent of this standard. A product whose features, characteristics, components, materials, orsystems conflict with specific requirements or provisions of this standard cannot be judged to comply withthis standard. Where considered appropriate, revision of requirements shall be proposed and adopted inconformance with the methods employed for development, revision, and implementation of this standard.

UL 935-2001荧光灯镇流器

1.1 These requirements cover ballasts of the resistance, reactance, and electronic (high frequency) types for use with fluorescent lamps involving a potential of 2500 volts or less in accordance with the National Electrical Code, ANSI/NFPA 70.1.2 A fluorescent-lamp ballast may be determined by investigation to be acceptable for use, in a fixtureor other device, with electric-discharge lamps of other than the fluorescent type.1.3 Fluorescent self ballasted lamps and ballast adaptors are evaluated using the Standard forSelf-Ballasted Lamps and Lamp Adapters, UL 1993. The component ballast is evaluated to requirementsin this Standard.1.4 A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shockor injury to persons shall be evaluated using appropriate additional component and end-productrequirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.

UL 1574-2004道路照明系统

1.1 These requirements cover track lighting systems intended for permanent connection to sources of supply in commercial or residential ordinary locations in accordance with the National Electrical Code, NFPA 70. The track lighting systems covered by this standard are rated: a) 300 volts or less; b) 150 volts or less to ground; and c) 50 amperes or less. 1.2 Lighting track is intended to be permanently installed and permanently connected to a branch circuit not exceeding 277 volts, nominal to ground, and 50 amperes. 1.3 These requirements cover: a) Track networks consisting of track and connectors; b) Mono-, duo-, and multi-point canopies; c) Incandescent, fluorescent, and High Intensity Discharge (HID) luminaire assemblies intended to be electrically connected to and physically supported by the track in track networks and canopies; d) Mounting means for the track; and e) Accessories. 1.4 These requirements do not cover: a) Busways intended for lighting, receptacles, or other general-purpose adaptors covered by the Standard for Busways, UL 857, and intended for use in accordance with Article 364 of the National Electrical Code, NFPA 70; or b) Track lighting systems for marine use aboard a ship or boat. 1.5 Track lighting systems are not intended for use: a) In wet or damp locations; b) In installations where the track is concealed; c) In hazardous locations; d) Where subject to physical damage; e) Where the track is extended through walls or partitions of building structures; f) Where subject to corrosive vapors; or g) In storage battery rooms. 1.6 A track lighting luminaire assembly that uses a tungsten-halogen lamp, fluorescent lamp, or high-intensity-discharge lamp shall also comply with the applicable requirements from the Standard for Luminaires, UL 1598.

UL 1776-2002高压清洗机

These requirements cover inverters ,converters ,charge controllers ,and output controllers intended for use in stand-alone(not grid connected) or utility-interactive (grid-connected) power systems .Utility-interactive inverters and converters are intended to be installed in parallel with an electric supply system or an electric utility to supply common loads.