黄色闪烁警示灯检测

黄色闪烁警示灯检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB 7956.1-2014消防车 第1部分:通用技术条件

GB 7956的本部分规定了消防车的术语和定义、分类及型号、通用技术要求和试验方法。本部分适用于各类消防车。

GB/T 23421-2009飞机装载设备基本要求

本标准规定了飞机装载设备的基本要求。本标准适用于已制定了功能规范的飞机装载设备。当设备是为装载集装单元设计时，应符合本标准和ISO 4116的要求。

GB/T 24965.1-2010交通警示灯.第1部分:通则

GB/T 24965的本部分规定了交通警示灯的产品分类、通用技术要求、试验方法、检验规则、标志、包装、运输及贮存等。本标准适用于具有交通警示作用的灯具。

GB 24965.2-2010交通警示灯.第2部分:黄色闪烁警示灯

GB/T 24965的本部分规定了黄色闪烁警示灯的构成、分类与命名、技术要求、测试方法、检验规则和标志、包装、运输及贮存。本标准适用于道路危险路段上设置的黄色闪烁警示灯。

GB/T 24965.3-2010交通警示灯 第3部分:雾灯

GB 24965的本部分规定了雾灯的分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本部分适用于具有交通警示、诱导作用的雾灯。

GB/T 24965.4-2010交通警示灯.第4部分:临时安全警示灯

GB/T 24965的本部分规定了临时安全警示灯的分类、技术要求、测试方法、检验规则、标志、包装、运输及贮存等。本部分适用于道路交通使用的临时安全警示灯。

GB/T 28387.2-2012印刷机械和纸加工机械的设计及结构安全规则.第2部分：印刷机、上光机和印前机械

GB/T 28387的本部分规定了印刷机、上光机和印前机械及辅助设备的安全要求，本部分应与GB/T 28387.1-2012一起使用，以共同确定在按制造商预定的条件下使用印刷机、上光机和印前机械及辅助设备时的所有重大危险（见第4章）。本部分未涉及由机器的噪声所引发的危险。这些危险基本包括在GB/T 28387.1-2012中。本部分适用于：——印前机械（用于生产原稿和印版的机械和装置）；用于生产胶片和印版的曝光设备；用于胶片和印版显影的设备；用于清洗印版的机器；用于折弯印版的机器；用于胶片和印版打孔的机器；用于裁切胶片和印版的机器；用于生产凹印版材的机器；扫描仪。——印刷机和上光机：打样机；单张纸印刷机和上光机，包括数字印刷机；卷筒纸平板印刷机和上光机，包括数字印刷机；丝网印刷机。辅助设备：滚筒和辊子清洗装置；连续工作的烘干装置；喷粉装置；供墨和润湿装置的辅助装置；自动夹紧印版装置；印版、辊子和刮墨刀清洗设备；纸堆翻转机；测量和控制装置。本部分不适用于承印物为纺织物的高压清理装置和丝网印刷机。

GB/T 32083-2015机场除冰剂撒布机

本标准规定了机场除冰剂撒布机（以下简称撒布机）的分类、技术要求、试验方法、检验规则、标牌、标志和使用说明书、包装、运输和贮存。本标准适用于在机场道面上撒布除冰剂的撒布机的设计与制造。

CJJ 68-2016城镇排水管渠与泵站运行、维护及安全技术规程

本规程适用于城镇排水管渠与泵站的运行和维护。

GA/T 414-2018道路交通危险警示灯

本标准规定了道路交通危险警示灯的分类及命名、技术要求、试验方法、检验规则、设置要求以及包装、运输和贮存。本标准适用于道路交通安全隐患路段、道路交通事件现场等场所设置的道路交通危险警示灯。

JT/T 1032-2016雾天公路行车安全诱导装置

本标准规定了雾天公路行车安全诱导装置的产品结构与型号、技术要求、试验方法、检验规则，以及标志、包装、运输与储存要求。本标准适用于公路雾天低能见度环境条件下应用的行车安全诱导装置及系统。城市道路在雾天、强降水、沙尘暴、烟雾等低能见度环境条件下，应用的行车安全诱导装置及系统可参照使用。

MH/T 6100-2013飞机管线加油车

本标准规定了民用机场的飞机管线加油车的技术要求、试验方法、检验规则及产品标志、包装、运输、储存等要求。本标准适用于民用机场的飞机管线加油车(以下简称加油车)的制造与验收。

MH/T 6101-2013飞机罐式加油车

本标准规定了民用机场的飞机罐式加油车的技术要求、试验方法、检验规则及产品标志、包装、运输、储存等要求。本标准适用于民用机场的飞机罐式加油车(以下简称加油车)的制造与验收。

EN 15746-1-2010轨道交通.钢轨.公路铁路两用机器及相关设备.第1部分:运行和作业的技术要求

This European Standard deals with the technical requirements to minimize the specific railway hazards of self propelled road-rail machines-henceforward referred to as machines-and associated equipment, which can arise during the commissioning, the operation and the maintenance of machines when carried out in accordance with the specification given by the manufacturer or his authorised representative. Part 1 of EN 15746 defines requirements for approval of the machine by an authorised body; Part 2 defines requirements for the machine to be declared conformant by the manufacturer, except in the case of machines classified under Annex 4 of the Machinery Directive, which require a conformity check in conjunction with a notified body. Additional requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilizing other than adhesion between the rail and rail wheels and underground infrastructures.This European Standard is also applicable for machines and associated equipment that in working configuration are partly supported on the ballast or the formation.This European Standard does not apply to the following: the requirements for quality of the work or performance of the machine; the specific requirements established by the machine operator for the use of machines, which will be the subject of negotiation between the manufacturer and the infrastructure manager; running and working whilst not on rails; separate machines temporarily mounted on machines and associated equipment; demountable machines as defined in 3.2; trailers as defined in 3.3, including road-rail trailers.This European Standard does not establish the additional requirements for the following: operation subject to special rules, e. g. potentially explosive atmospheres; hazards due to natural causes, e. g. earthquake, lightning, flooding; working methods; operation in severe working conditions requiring special measures, e. g. work in tunnels or in cuttings, extreme environmental conditions such as: freezing temperatures, high temperatures, corrosive environments, tropical environments, contaminating environments, strong magnetic fields; hazards due to errors in software; hazards occurring when used to handle suspended loads which may swing freely. Other track construction and maintenance machines used on railway tracks are dealt with in other European Standards, see Annex G.This European Standard applies to all machines which are ordered one year after the publication date by CEN of this European Standard.

DIN 75079-2009紧急手术车辆.定义,要求,试验

The document is for fast emergency car for first aid by special medical doctor and described concepts, requirements, test.

DIN EN 1010-2-2011机械安全性.打印机和纸加工机的设计和构造的安全性要求.第2部分:包括预压机械的印刷机和涂漆机;德文版本EN 1010-2-2006+A1-2010

This document applies to: Pre-press machinery (machinery and devices for the production of master copies and printing forms): - exposure equipment for the production of films and printing forms; - equipment for developing films and printing forms; - washing machines for printing forms; - machines for bending printing forms; - punching machines for film and printing forms; - cutting machines for film and printing forms; - machines for the production of gravure printing forms; - scanners. Printing and varnishing machines: - proofing presses; - sheet-fed printing presses and varnishing machines including digital printing presses; - web-fed rotary presses and varnishing machines including digital printing presses; - screen printing presses. Auxiliary devices: - cylinder and roller washing devices; - continuous flow drying devices; - powder spraying devices; - auxiliary devices on inking and damping units; - automatic plate clamping devices; - washing equipment for printing forms, rollers and scrapers; - pile turners; - measuring and control devices. This document shall be used together with EN 1010-1:2004+A1. Both parts together identify all significant hazards relevant to printing and varnishing machines including pre-press machinery and auxiliary devices, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements specified in prEN 1010-2 take precedence over respecti¬ve requirements in this standard. This document does not deal with risks generated by noise emitted from the machines. These issues are fundamentally covered in EN 1010-1:2004+A1. This document does not apply to high-pressure cleaning devices and screen printing presses for textile substrates. This document is not applicable to printing and varnishing machines including pre-press machinery which are manufactured before the date of publication of this document by CEN.

DIN EN 12352-2006交通管制设备.告警和安全灯装置

This European Standard specifies the requirements for individual electrically operated light devices, called warning lights, emitting a continuous or regular intermittent light of a single colour which, by their colour and position alone, are used to warn, inform or guide road users. It specifies the requirements for visual, structural and operational performances and the relevant test methods to be used. This European Standard is not applicable to lighting devices which convey messages by additional means (e. g. traffic signals) or which are covered by vehicle lighting regulations.

DIN EN 15059-2015扫雪设备的安全要求;德文版本DIN EN 15059-2009+A1-2015

This standard applies to snow grooming equipment as defined in 3.1 and its use with attachments as described in 3.2. With the exception of rear-mounted snow tillers and front blade attachments, this standard does not deal with the specific hazards of the attachments themselves. This standard is not applicable to snowmobiles. This standard deals with all significant hazards, hazardous situations and events relevant to snow grooming equipment, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It also deals with hazards during commissioning, use, fault-finding and maintenance. This standard is not applicable to snow grooming equipment manufactured before the date of publication of this document by CEN. NOTE For travelling on public roads, national traffic regulations apply until harmonised requirements are available.

BS EN 1010-2-2006+A1-2010机械安全性.印刷机和换纸机的设计和构造的安全性要求.包括预压机械的印刷机和涂漆机

This document applies to: Pre-press machinery (machinery and devices for the production of master copies and printing forms): exposure equipment for the production of films and printing forms; equipment for developing films and printing forms; washing machines for printing forms; machines for bending printing forms; punching machines for film and printing forms; cutting machines for film and printing forms; machines for the production of gravure printing forms; scanners. Printing and varnishing machines: proofing presses; sheet-fed printing presses and varnishing machines including digital printing presses; web-fed rotary presses and varnishing machines including digital printing presses; screen printing presses. Auxiliary devices: cylinder and roller washing devices; continuous flow drying devices; powder spraying devices; auxiliary devices on inking and damping units; automatic plate clamping devices; washing equipment for printing forms, rollers and scrapers; pile turners; measuring and control devices.This document shall be used together with !EN 1010-1:2004+A1". Both parts together identify allsignificant hazards relevant to printing and varnishing machines including pre-press machinery and auxiliary devices, when they are used as intended and under the conditions foreseen by the manufacturer (see clause4). The specific requirements specified in prEN 1010-2 take precedence over respective requirements in thisstandard.This document does not deal with risks generated by noise emitted from the machines. These issues arefundamentally covered in !EN 1010-1:2004+A1"This document does not apply to high-pressure cleaning devices and screen printing presses for textilesubstrates.This document is not applicable to printing and varnishing machines including pre-press machinery which aremanufactured before the date of publication of this document by CEN.