成分分析 · 材料检测 · 食品检测 · 环境检测

专业检测知识科普,帮您选对检测方案

咨询工程师

广场用陶瓷砖检测

发布时间:2024-06-21 作者:中析研究所 浏览:

GB/T 9195-2011建筑卫生陶瓷分类及术语

本标准规定了建筑卫生陶瓷的分类、术语和定义。本标准适用于建筑卫生陶瓷的设计、生产、质量检验、贸易、科学研究、教学等领域。

GB/T 23458-2009广场用陶瓷砖

本标准规定了广场用陶瓷砖的术语和定义、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输及贮存。本标准适用于广场、步行街、社区园林等室外场所地面装饰铺贴的陶瓷制品。

GB/T 35610-2017绿色产品评价 陶瓷砖(板)

本标准规定了绿色产品陶瓷砖(板)的术语和定义、产品分类、评价要求和评价方法。本标准适用于陶瓷砖、陶瓷板(含干挂空心陶瓷板)和广场砖等建筑陶瓷产品。

GB/T 51100-2015绿色商店建筑评价标准

本标准适用于绿色商店建筑的评价。

GB/T 51148-2016绿色博览建筑评价标准

本标准适用于绿色博览建筑的评价。

GB/T 51165-2016绿色饭店建筑评价标准

本标准适用于绿色饭店建筑的评价。

GB/T 51188-2016建筑与工业给水排水系统安全评价标准

本标准适用于新建、扩建、改建和既有建筑与工业的给水排水系统安全评价。本规范不适用于军工等特殊行业建筑与工业的给水排水系统安全评价。

CECS 244-2008砂基透水砖工程施工及验收规程

本规程适用于城市广场、人行道、园林、校园、停车场、车行道、住宅小区和室外运动场等新建和改扩建砂基透水砖工程的施工及验收。

JGJ/T 331-2014建筑地面工程防滑技术规程

本规程适用于新建、扩建、改建的建筑工程中建筑室内外防滑地面的设计、施工及验收。

RB/T 110-2014能源管理体系.建筑卫生陶瓷企业认证要求

本标准规定了建筑卫生陶瓷企业能源管理体系的认证要求。本标准适用于建筑卫生陶瓷企业的能源管理体系认证,可用于企业建立、实施、保持和改进其能源管理体系,也可作为各相关方评价企业能源管理体系的依据。其他陶瓷企业可参照使用本标准。

DB11/T 152-2003城市道路混凝土路面砖

本标准规定了城市道路混凝土路面砖的分类、一般规定、技术要求、试验方法、检验规则、标识、使用说明书、包装、运输、贮存等。本标准适用于以水泥和集料为主要原材料,经加压、振动加压或其他成型工艺制成的,用于铺设城市道路人行道、城市广场等的混凝土路面及地面工程的块、板等。其表面可以是有面层(料)的或无面层(料)的;本色的或彩色的。用于铺设城市道路人行道、城市广场的其它产品材料(如地材),可参照执行。

DB64/ 558-2009建筑工人安全操作规程

本标准规定了建筑工人安全操作的术语和定义、总则、一般规定、架子工、瓦工、抹灰工、石工、木工、钢筋工、混凝土工、普通工、电工、安装电工、防水工、起重吊装工、金属焊割作业工、油漆工、测量工、机械设备维修工、水暖工、铆工、通风工、筑炉工、保温工、桩基施工、大模片施工、钢结构及网架施工、装饰装修施工、拆除施工、土方及筑路机械、桩工机械、吊装及垂直运输机械、混凝土机械、中小型施工机具、市政工程的操作。

ASTM C1193-2005a接缝密封剂使用的标准指南

This guide provides information and guidelines for consideration by the designer or applicator of a joint seal. It explains the properties and functions of various materials, such as sealant, sealant backing, and primer, among others; and, procedures such as, substrate cleaning and priming, and installation of the components of a sealed joint. It presents guidelines for the use and application of the various materials, design of a sealant joint for a specific application, and environmental conditions and effects that are known to detrimentally affect a sealant joint. The information and guidelines are also useful for those that supply accessories to the sealant industry and for those that install sealants and accessory materials associated with sealant use. In addition to the design and installation data in this guide, consult the sealant manufacturer about applications for its products and their proper use and installation. Considering the range of properties of commercially available sealants, the variety of joint designs possible, and the many conditions of use, the information contained herein is general in nature. To assist the user of the guide in locating specific information, a detailed listing of guide numbered sections and their descriptors are included in Appendix X2.1.1 This guide describes the use of a cold liquid-applied sealant for joint sealing applications. Including joints on buildings and related adjacent areas, such as plazas, decks, and pavements for vehicular or pedestrian use, and types of construction other than highways and airfield pavements and bridges. Information in this guide is primarily applicable to a single and multi-component, cold liquid-applied joint sealant and secondarily to a precured sealant when used with a properly prepared joint opening and substrate surfaces.1.2 An elastomeric or non-elastomeric sealant described by this guide should meet the requirements of Specification C 834, C 920, or C 1311.1.3 This guide does not provide information or guidelines for the use of a sealant in a structural sealant glazing application. Guide C 1401 should be consulted for this information. Additionally, it also does not provide information or guidelines for the use of a sealant in an insulating glass unit edge seal used in a structural sealant glazing application. Guide C 1249 should be consulted for this information.1.4 Practice C 919 should be consulted for information and guidelines for the use of a sealant in an application where an acoustic joint seal is required.1.5 This guide also does not provide information relative to the numerous types of sealant that are available nor specific generic sealant properties, such as hardness, tack-free time, or curing process, among others. Guide C 1299 should be consulted for information on generally accepted comparative values for the characteristics and properties of the more common generic types of liquid-applied sealant.1.6 The values stated in SI units are to be regarded as the standard. The values given in parenthesis are provided for information only.1.7 The Committee with jurisdiction for this standard is not aware of any comparable standards published by other organizations.1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.1.9 The committee with jurisdiction over this standard is not aware of any comparable standards published by other organizations.

ASTM C1528-2002外用尺寸石选则的标准指南

1.1 This guide is intended to be used by architects, engineers, specifiers, contractors, and material suppliers who design, select, specify, install, purchase, fabricate, or supply natural stone products for construction applications.1.2 Consensus Standard8212;This guide is an industry consensus standard drafted in a cooperative effort among engineers, architects, geologists, producers, and installers of natural stone.

NF P10-204-1-1-2008建筑工程.小型砖石隔墙.第1-1部分:技术模型条款的合同单

Le présent document définit les clauses techniques d'exécution d'ouvrages courants de cloisons de petits éléments de maçonnerie hourdés au mortier d'usage courant, au mortier-colle pour joints minces ou au plâtre.Les dites cloisons ont une épaisseur inférieure ou égale à 15 cm.Les ouvrages concernés sont les cloisons de distribution, les cloisons séparatives non porteuses, les parois de gaines techniques et les cloisons de doublage de bâtiments destinés aux logements, bâtiments scolaires et hospitaliers et aux immeubles de bureaux, pour des conditions normales d'utilisation, c'est-à-dire occupés en permanence et sans surpeuplement.Pour certains ouvrages autres que courants dont les exigences peuvent être différentes (bâtiments à usage industriel, agricole, garages), les prescriptions peuvent être adaptées en tenant compte des caractéristiques particulières des constructions et de leur destination, fonction du programme arrêté par le maître d'ouvrage, précisé dans les Documents Particuliers du Marché.Le présent document ne s'applique donc pas aux murs de remplissage extérieurs ni aux murs participant à la stabilité de la structure qui sont traités par la norme NF DTU 20.1.

ANSI/ASSE A10.7-2011商用炸药和起爆剂的运输,存储,装卸和使用的安全要求

This standard is applicable to the transportation, storage, handling, and use of commercial explosives and blasting agents in the construction industry.

ANSI/ASSE A10.8-2011脚手架安全要求

This standard establishes safety requirements for the construction, operation, maintenance, and use of scaffolds used in the construction, alteration, demolition, and maintenance of buildings and structures. This standard does not cover permanently installed suspended scaffold systems or aerial platforms. Please note that this standard is based on the 2001 version of the A10.8 Standard, which was administratively withdrawn by ANSI. Since the standard was withdrawn it is viewed/processed as a new standard, but the new document is based on the 2001 administratively withdrawn standard.

上一篇先进陶瓷制品检测 下一篇陶瓷马赛克检测

相关阅读

了解更多检测知识

道桥材料检测

道桥材料检测覆盖水泥、沥青、集料、钢筋及结构混凝土等对象,通过取样规范、力学试验、化学分析与无损检测等手段,测定强度、变形、耐久等关键指标。本文按样品制备、检测方法、指标测定到判定标准的步骤展开,说明各环节操作要点,并给出第三方检测机构的选择要素,可用于工程质量控制与验收参考。

2026-11-13 | [其他]

洗衣凝珠检测

洗衣凝珠检测围绕成分、性能与安全三大维度展开,涵盖取样规范、HPLC法测定活性物含量、表面活性剂鉴定与酶活分光光度法测定、去污力与溶解性能试验、微生物限量与重金属指标判定。本文按流程分述各检测方法与操作要点,供质量控制与委托检测参考。

2026-11-09 | [其他]

绿色食品检测

绿色食品检测覆盖农药残留、重金属、微生物限量及理化品质等维度。本文按样品制备、GC-MS农残测定、ICP-MS重金属测定、平板计数法微生物检验的顺序说明操作要点,并阐述灵敏度、回收率等方法验证指标与判定标准,适合标志申报与质量控制场景参考。

2026-11-07 | [其他]

吐鲁番葡萄检测

吐鲁番葡萄检测围绕样品采集制备、农药残留GC-MS与HPLC分析、糖度及营养成分分光光度测定、重金属与微生物联检等环节展开。检测依据食品安全国家标准中的限量要求判定,报告可用于收购分级、市场准入及地理标志产品核查,检测流程规范、结果可追溯。

2026-10-31 | [其他]

食品过敏原检测

食品过敏原检测覆盖样本制备、ELISA蛋白筛查、PCR基因成分鉴定及LC-MS/MS质谱确证等环节。检测针对乳、蛋、花生、坚果、麸质等常见致敏成分,以检出限、特异性、回收率等指标评价方法性能,判定结果用于交叉污染控制、标签标示与进出口合规管理。

2026-10-29 | [其他]

二硫化钼检测

二硫化钼检测围绕物相结构、微观形貌、粒度分布与化学纯度展开,常用X射线衍射鉴别2H与1T晶型及杂相,拉曼光谱判断层数与缺陷状态,扫描电镜观察颗粒形貌,激光粒度法测定粒径分布,ICP光谱定量杂质元素。本文按制样、表征、指标判定的流程介绍各方法操作要点与适用场景。

2026-10-29 | [其他]

我们的优势

选择中析研究所的八大理由

资质齐全

旗下实验室依法依规开展检测,报告科学公正,获监管与客户广泛认可。

设备先进

上千台精密仪器定期检定校准,量值溯源体系完善。

专家团队

多领域技术专家,十年以上经验,破解各类疑难检测。

标准覆盖广

覆盖GB、行标及ISO、ASTM等国际标准,可定制方案。

周期短

常规项目7-10个工作日出报告,流程标准高效。

加急服务

支持加急检测通道,助力客户快速完成质量把关。

一对一服务

工程师全程对接,需求沟通到报告解读全流程陪伴。

数据保密

严格保密制度,客户样品与检测数据安全无忧。

旗下实验室资质

我司旗下实验室具备CMA资质认定及CNAS认可,具体项目是否在资质认定/实验室认可范围内请与工程师确认。

CMA检验检测机构资质认定证书

CMA检验检测机构资质认定证书

CNAS实验室认可证书

CNAS实验室认可证书

ISO管理体系认证证书

ISO管理体系认证证书

高新技术企业证书

高新技术企业证书

中国分析测试协会会员单位

中国分析测试协会会员单位

中国质量协会会员证书

中国质量协会会员证书

AAA级信用企业证书

AAA级信用企业

绿色低碳诚信示范创建企业证书

绿色低碳诚信示范创建企业

仪器设备

1000余台精密设备 · 点击查看原图

气相色谱-质谱联用仪

气相色谱-质谱联用仪 GC-MS

复杂有机组分的定性鉴定与未知物剖析利器。

高效液相色谱仪

高效液相色谱仪 HPLC

食品添加剂、药品成分等热敏物质的精准检测。

电感耦合等离子体发射光谱仪

电感耦合等离子体发射光谱仪 ICP-OES

一次进样同时读出数十种金属元素含量。

傅里叶变换红外光谱仪

傅里叶变换红外光谱仪 FTIR

通过特征吸收峰快速判断材料种类与分子结构。

X射线荧光光谱仪

X射线荧光光谱仪 XRF

几分钟完成元素快检,且不损伤样品。

扫描电子显微镜

扫描电子显微镜 SEM

放大数十万倍观察表面微观结构,锁定失效根源。

液相色谱-质谱联用仪

液相色谱-质谱联用仪 LC-MS

农兽药残留等痕量物质的高灵敏确证检测。

气相色谱仪

气相色谱仪 GC

溶剂残留、香气成分等挥发性物质的专业检测。

在线工程师 一对一服务

检测需求不知从何入手?立即联系在线工程师,一对一解答检测疑问,免费获取检测方案与报价。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通