光催化空气净化材料检测

光催化空气净化材料检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 23761-2020光催化材料及制品空气净化性能测试方法 乙醛（或甲醛）的降解

本标准规定了光催化材料及制品空气净化性能测试方法的原理、试剂或材料、仪器设备、样品、试验步骤、试验数据处理和试验报告。本标准适用于光催化材料及制品去除空气中乙醛(或甲醛)性能的测试。

GB/T 23763-2009光催化抗菌材料及制品.抗菌性能的评价

本标准规定了光催化抗菌材料及制品的抗菌性能术语和定义、抗菌性能的评定、试验方法和试验报告。本标准适用于在光照激发下产生抗菌性能的光催化抗菌材料及制品，要求试验样品表面平整、与覆盖膜接触良好，其材质可以为玻璃、陶瓷、塑料、涂层、织物等。

GB/T 29909-2013暖通空调系统清洁设备术语

本标准规定了暖通空调系统清洁设备的基础术语、空气系统清洁设备术语、水系统清洁设备术语、消毒与灭菌设备术语和相关术语。本标准适用于暖通空调系统清洁设备的科研、设计、生产、检测、管理与维护。

GB/T 30809-2014光催化材料性能测试用紫外光光源

本标准规定了光催化材料性能测试对紫外光光源的要求。本标准适用于采用主波长为365 nm的单端、双端或自镇流的紫外光光源(不包括LED紫外光光源)。

GB/T 39716-2020光催化材料及制品空气净化性能测试方法 氮氧化物的去除

本标准规定了光催化材料及制品去除空气中氮氧化物测试方法的原理、测试装置、分析方法和试验报告等内容。本标准适用于光催化材料及制品去除空气中氮氧化物性能的测试。

GB/T 42265-2022光催化材料空气净化性能测试方法 甲苯的去除

本文件描述了一种用于含有或表面附着光催化剂的材料的空气净化性能检测方法，所涉及光催化剂通常是半导体金属氧化物，如二氧化钛(TiO<下标2>)或其他陶瓷材料。该测试方法将试样置于紫外光(UV-A)照射下，持续暴露于模拟污染空气中进行。本文件适用于不同类型和用途的板材，如薄板、木板等建筑材料。本文件也适用于结构化的过滤材料，如蜂窝过滤板、针织布或无纺布。同时适用于复合陶瓷微晶的塑料、纸质材料等。本文件不适用于粉状或颗粒状光催化材料。本试验方法通常适用于光催化材料的空气净化检测，不适用于光催化材料的其他性质测定，如水中污染物降解、自清洁、防雾或抗菌等。本方法仅涉及甲苯的去除。

GB/T 42349-2023光催化材料抗病毒活性的测定 Q-β噬菌体试验方法

本文件描述了含有光催化剂或表面有光催化剂或光催化材料涂膜表面的抗病毒活性的测试方法，本方法通过计数经紫外光照之后的Q-β噬菌体的减少来确定其抗病毒活性。本文件适用于建材中使用的不同种类的半导体光催化材料，其基本形制包括片状、块状或平板状等，但不包括粉末、颗粒或多孔光催化材料。本文件适用于具有抗病毒性能的光催化材料的检测，不适用于抗细菌、抗真菌、水中污染物降解、自清洁、防雾和空气净化性能的检测。本文件中的量值表达采用单位制(SI)单位。

ISO 17168-1-2018精细陶瓷.室内光照环境下半导体光催化材料空气净化性能的试验方法. 第1部分: 一氧化氮去除

This document specifies a test method for the determination of the air purification performance, with regards to removal of nitric oxide, of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under illumination from indoor light. This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, which are the basic forms of materials for various applications. This document also applies to materials in honeycomb form and to plastic or paper materials containing ceramic microcrystals and composites. This document does not apply to certain test pieces that contain a large amount of adsorbent, due to unattained adsorption equilibrium. This document does not apply to powder or granular photocatalytic materials. This test method

ISO 17168-2-2018精细陶瓷.室内光照环境下半导体光催化材料空气净化性能的试验方法. 第2部分: 乙醛去除

This document specifies a test method for the determination of the air-purification performance, with regards to removal of acetaldehyde, of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under illumination from indoor light. This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, which are the basic forms of materials for various applications. This document also applies to materials in honeycomb form, and to plastic or paper materials containing ceramic microcrystals and composites. This document does not apply to powder or granular photocatalytic materials. This test method is usually applicable to photocatalytic materials produced for air purification. This method is not suitable for the determination of

ISO 17168-3-2018精细陶瓷. 室内光照环境下半导体光催化材料空气净化性能的试验方法. 第3部分: 甲苯去除

This document specifies a test method for the determination of the air-purification performance, with regards to the removal of toluene, of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under illumination from indoor light. This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, which are the basic forms of materials for various applications. This document also applies to materials in honeycomb form, and to plastic or paper materials containing ceramic microcrystals and composites. This document does not apply to powder or granular photocatalytic materials. This test method is usually applicable to photocatalytic materials produced for air purification. This method is not suitable for the determination of o

ISO 17168-4-2018精细陶瓷. 室内光照环境下半导体光催化材料空气净化性能的试验方法. 第4部分: 甲醛去除

This document specifies a test method for the determination of the air-purification performance, with regards to the removal of formaldehyde, of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under illumination from indoor light. This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, which are the basic forms of materials for various applications. This document also applies to materials in honeycomb form, and to plastic or paper materials containing ceramic microcrystals and composites. This document does not apply to powder or granular photocatalytic materials. This test method is usually applicable to photocatalytic materials produced for air purification. This method is not suitable for the determination

ISO 17168-5-2018精细陶瓷(高级陶瓷、高级工业陶瓷). 在室内照明环境下半导体光催化材料空气净化性能的试验方法. 第5部分: 去除甲硫醇

This document specifies a test method for the determination of the air-purification performance, with regards to removal of methyl mercaptan, of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under illumination with indoor light. This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, which are the basic forms of materials for various applications. This document also applies to materials in honeycomb form, and to plastic or paper materials containing ceramic microcrystals and composites. This document does not apply to powder or granular photocatalytic materials. This test method is usually applicable to photocatalytic materials produced for air purification. This method is not suitable for the determination

ISO 22197-1-2016精细陶瓷(高级陶瓷, 高级工业陶瓷). 半导体光催化材料空气净化性能试验方法. 第1部分: 一氧化氮净化

This document specifies a test method for the determination of the air-purification performance of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides, such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under illumination with ultraviolet light. This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, that are the basic forms of materials for various applications. This document also applies to materials in honeycomb-form and to plastic or paper materials if they contain ceramic microcrystals and composites. This document does not apply to powder or granular photocatalytic materials. This test method is usually applicable to photocatalytic materials produced for air purification. This method is not suitable for the determination of other performance attributes of p

ISO 22197-2-2019精细陶瓷(高级陶瓷,高级工业陶瓷). 半导体光催化材料空气净化性能的试验方法. 第2部分: 乙醛的清除

This document specifies a test method for the determination of the air-purification performance of materials that contain a photocatalyst or have photocatalytic films, usually made from semiconducting metal oxides, such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under irradiation with ultraviolet light (UV-A). This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, that are the basic forms of materials for various applications. This document also applies to structured filter materials including honeycomb-form, woven and nonwoven fabrics, and to plastic or paper materials if they contain ceramic microcrystals and composites. This document does not apply to powder or granular photocatalytic materials. This test method is usually applicable to photocatalytic materials produced for air purification. This method is not suitable for the deter

ISO 22197-3-2019精细陶瓷(高级陶瓷,高级工业陶瓷). 半导体光催化材料空气净化性能的试验方法. 第3部分: 甲苯的清除

This document specifies a test method for the determination of the air-purification performance of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides, such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under irradiation with ultraviolet light (UV-A). This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, that are the basic forms of materials for various applications. This document also applies to structured filter materials including honeycomb-form, woven and nonwoven fabrics, and to plastic or paper materials if they contain ceramic microcrystals and composites. This document does not apply to powder or granular photocatalytic materials. This test method is usually applicable to photocatalytic materials produced for air purification. This method is not suitabl

ISO 22197-4-2021精细陶瓷(高级陶瓷、高级工艺陶瓷). 半导体光催化材料空气净化性能的试验方法. 第5部分: 甲醛的清除

This document specifies a test method for the determination of the air-purification performance of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides, such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under irradiation with long-wave ultraviolet (UV) light. This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, that are the basic forms of materials for various applications. This document also applies to structured filter materials including honeycomb-form, woven and non-woven fabrics, and to plastic or paper materials if they contain ceramic microcrystals and composites. This document does not apply to powder or granular photocatalytic materials. This test method is usually applicable to photocatalytic materials produced for air purification. This method is no

ISO 22197-5-2021精细陶瓷(高级陶瓷、高级工艺陶瓷). 半导体光催化材料空气净化性能的试验方法. 第5部分: 甲硫醇的清除

This document specifies a test method for the determination of the air-purification performance of materials that contain a photocatalyst or have photocatalytic films on the surface, usually made from semiconducting metal oxides, such as titanium dioxide or other ceramic materials, by continuous exposure of a test piece to the model air pollutant under irradiation with long-wave ultraviolet (UV) light. This document is intended for use with different kinds of materials, such as construction materials in flat sheet, board or plate shape, that are the basic forms of materials for various applications. This document also applies to structured filter materials including honeycomb-form, woven and non-woven fabrics, and to plastic or paper materials if they contain ceramic microcrystals and composites. This document does not apply to powder or granular photocatalytic materials. This test method is usually applicable to photocatalytic materials produced for air purification. This method is no