进出口皮革及皮革制品检测

进出口皮革及皮革制品检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 6565-2015职业分类与代码

本标准规定了我国职业的分类结构、类别、代码及说明。本标准适用于按职业分类的各种普查、调查统计及行政管理和国内外信息交流等。

GB 7691-2003涂装作业安全规程 安全管理通则

本标准规定了涂装(涂覆、涂布，下同)作业使用的涂料及有关化学品、涂装工艺、涂装设备器械、作业场所和涂装施工的安全管理基本原则。 本标准适用于使用涂料及有关化学品(包括有机溶剂)在金属或非金属表面的涂装作业，包括露天涂装作业，建筑物、构筑物内外涂饰作业，塑料制品、纺织品、皮革制品、漆布等非金属的涂覆、涂布、印染、上光等有机溶剂作业。也适用于涂料及有关化学品、涂装工艺、涂装设备器械、涂装厂房(涂装作业场所)的科研、设计、生产、制造、运输、施工安装、经营(包括经营活动的技术交流、商品展览)与管理。 其他有机溶剂作业亦可参照执行本标准。

GB/T 35528-2017低温液化气体安全指南

本标准规定了常用低温液化气体的(装置)设计、充装、储存、运输和使用等过程中与安全密切相关的基本要求。本标准适用于以低温液体形式运输和储存的常用工业气体，即氢、氧、氮、氦、氖、氩、氪和甲烷的低温液化产品。本标准不适用于各种常用工业气体及其液化产品的生产过程。

GB 50084-2017自动喷水灭火系统设计规范

本规范适用于新建、扩建、改建的民用与工业建筑中自动喷水灭火系统的设计。本规范不适用于火药、炸药、弹药、火工品工厂、核电站及飞机库等特殊功能建筑中自动喷水灭火系统的设计。

SN/T 0006-2015检验检疫纺织标准编制指南

本标准规定了进出口纺织品检验检疫行业标准的结构和编写的一般原则。本标准适用于进出口纺织品检验检疫行业标准编写指导。

SN/T 0007.1-2016进出口轻工产品检验标准编写的基本规定 第1部分:检验规程

SN/T 0007的本部分规定了进出口轻工产品检验规程(以下简称检验规程)编写的基本要求、结构和编写顺序。本部分适用于进出口轻工产品检验规程的编写。

SN/T 0193.1-2015出口皮革及皮革制品中五氯酚残留量检测方法 第1部分:液相色谱-质谱/质谱法

SN/T 0193的本部分规定了出口鞣质猪皮、牛皮、羊皮及其制品中五氯酚残留量的液相色谱-质谱/质谱测定方法。本部分适用于鞣质猪皮、牛皮、羊皮中五氯酚残留量定性确证和定量测定。

SN/T 1045.1-2010进出口染色纺织品和皮革制品中禁用偶氮染料的测定.第1部分:液相色谱法

SN/T 1045的本部分规定了染色纺织品和皮革制品中23种禁用芳香胺(见附录A)含量的液相色谱检测方法。本部分适用于进出口染色纺织品(包括棉、麻、丝、毛、化纤等)和染色皮革制品中23种禁用芳香胺的检测。

SN/T 1045.2-2010进出口染色纺织品和皮革制品中禁用偶氮染料的测定.第2部分:气相色谱/质谱法

SN/T 1045的本部分规定了染色纺织品和皮革制品中23种禁用芳香胺(见附录A)含量的气象色谱/质谱检测方法。本部分适用于进出口染色纺织品(包括棉、麻、丝、毛、化纤等)和染色皮革制品中23种禁用芳香胺的检测。

SN/T 1045.3-2010进出口染色纺织品和皮革制品中禁用偶氮染料的测定.第3部分:气相色谱法

SN/T 1045的本部分规定了染色纺织品和皮革制品中23种禁用芳香胺(见附录A)含量的气相色谱检测方法。本部分适用于进出口染色纺织品(包括棉、麻、丝、毛、化纤等)和染色皮革制品中23种禁用芳香胺的检测。

SN/T 1649-2012进出口纺织品安全项目检验规范

本标准规定了进出口纺织品的基本安全项目的技术要求、试验方法和检验规则，并给出了其他安全项目的限定指标及主要内容等。本标准适用于进出口纺织品安全项目的检验。

SN/T 1654-2005进出口皮革及皮革制品中2,3,5,6-四氯苯酚残留量的测定 乙酰化气相色谱法

本标准规定了皮革、皮革制品中2，3，5，6-四氯苯酚及其盐类残留量测定方法。 本标准适用于各种皮革及其制品中2，3，5，6-四氯苯酚及其盐类残留量的测定。

SN/T 1929-2007进出口纺织品安全项目检验术语

本标准规定了进出口纺织品安全项目检验的通用术语。

SN/T 2583-2010进出口纺织品及皮革中烷基酚类化合物残留量的测定 气相色谱-质谱法

本标准规定了纺织品及皮革制品中壬基苯酚、辛基苯酚和十二烷基苯酚残留量测定方法。本标准适用于各种纺织品及皮革制品中壬基苯酚、辛基苯酚和十二烷基苯酚残留量的测定。

SN/T 2791.1-2011进出口玩具检验检疫通用技术要求.第1部分:玩具卫生

SN/T 2791的本部分规定了进出口玩具及玩具材料的卫生要求及检验方法。本部分适用于下列玩具及玩具材料的检验：--软性造型黏土；--玩具中含有的液体、膏体、油灰、凝胶和粉末；--玩具填充物；--玩具上使用的动植物天然材料(如：羽毛、皮革制品等)；--玩具化妆品；--供3岁及以下儿童使用的玩具；--与食品一起提供的玩具。

EN 12044-2005鞋,皮革和仿皮革产品制造机械.切割和打孔机.安全要求.包含修改件A1-2009

This European Standard specifies safety requirements for the design and operation of the machines defined in 1.2. It takes account of intended use, foreseeable misuse and component and system failure.This European Standard applies for cutting and punching machines used in the manufacture of footwear, leather and imitation leather goods and other related components.This European Standard applies to the following cutting and punching machines: swing arm cutting presses with manual or powered swing arm; manual and automatic travelling head cutting presses with powered travelling head; manual and automatic beam cutting presses; punching and perforating presses; C-frame cutting presses.This European Standard is not applicable to: mechanical presses; presses intended for working cold metal; fastening, riveting, stitching, stapling, bending or folding machines; guillotines, shears and similar machines; shoe and leather presses as described in EN 12203.This European Standard deals with all significant hazards, hazardous situations and events relevant to the footwear, leather and imitation leather goods manufacturing machinery defined in 1.2, when it is used as intended and under the conditions foreseen by the manufacturer (see Clause 4) and is intended for operation in applications by trained persons.This European Standard deals with material feeding and handling devices, when attached to the machine.This European Standard is not applicable to machines which are manufactured before the date of publication of this European Standard by CEN.

EN 13457-2004鞋靴,皮革和仿皮货物的生产机械.片皮机,剖革机,裁切机,擦胶机和干胶机.安全要求.包含修改件A1-2010

This document applies to splitting, skiving, edge trimming, strip cutting, cementing and cement drying machines used inThe manufacture of footwear, leather and imitation leather goods and other related components.This document does not apply to:trimming machines with rotary milling tool forThe purpose of trimming edges of material, see EN 930; splitting and band knife machines used in tanneries, see EN 13112; portable machines.This document specifies safety requirements for construction, transport, installation, adjustment, setting, teaching or process change-over, operation, cleaning, maintenance, decommissioning, dismantling and, as far as safety is concerned, disposal for machines mentioned in 1.1. It takes account of intended use, foreseeable misuse, component and system failure.This document deals with significant hazards relevant toThe footwear, leather and imitation leather goods manufacturing industries. (For a list of hazards see Clause 4.)The document does not deal with precise technical measures for reducingThe risks of fumes and dusts detrimental to health.The use of machines falling withinThe scope of this document for purposes other than those specified in 1.1, may give rise to hazards not considered during its preparation.This document also applies to equipment for material handling and operations which are an integral part of the machine.This document assumesThe machines are operated by adequately trained persons are used with adequate workplace lighting conformingThe local regulations or to EN 12464-1.This document is not applicable to splitting, skiving, edge trimming, strip cutting, cementing and cement drying machines which are manufactured beforeThe date of its publication as EN.

EN ISO 13855-2010机械安全.保障措施相对于人体部位接近速度的定位［代替:CEN EN 999］

This International Standard establishes the positioning of safeguards with respect to the approach speeds of parts of the human body

NF G83-102-2008制鞋机械.靴模机械.安全要求

La présente Norme européenne s'applique aux machines de moulage pour chaussures utilisées dans l'industrie de la chaussure pour la production de chaussures et d'articles chaussants.Ces machines sont :- les machines de moulage direct des semelles ;- les machines de moulage d'éléments de chaussures et de semelles (voir Figures 4 à 10) ;- les machines pour moulage complet de chaussures et bottes.La présente Norme européenne s'applique également aux machines mentionnées lorsqu'elles sont utilisées pour des produits autres que les chaussures et articles chaussants, dans la mesure où ces produits ne nécessitent pas d'autre modification qu'un moule différent.La présente Norme européenne spécifie les prescriptions de sécurité relatives à la construction, au transport, à l'installation, à la mise au point, au réglage, à l'apprentissage ou au changement de procédé de fabrication, au fonctionnement, au nettoyage, à la maintenance, à la mise hors service, au démontage et, pour autant que cela concerne la sécurité, à la mise au rebut des machines mentionnées en 1.1.Elle traite de tous les phénomènes dangereux significatifs, situations et événements dangereux applicables aux machines de moulage pour chaussures, lorsqu'elles sont utilisées selon l'usage prévu et dans des conditions de mauvais usage raisonnablement prévisibles par le fabricant.

DIN EN 1845-2008制鞋机械.鞋模机械.安全要求

1.1 This European Standard applies to footwear moulding machines which are intended for use in the shoeindustry for the production of footwear and footwear components.These machines are:-- direct-on sole moulding machines (see Figures 1, 2 and 3);-- unit sole and footwear component moulding machines (see Figures 4 to 10);-- full shoe and boot moulding machines (see Figure 11).This European Standard applies also to the mentioned machines when used for other products than footwearand footwear components, as far as these products require no other changes than a different mould.1.2 This European Standard specifies safety requirements for construction, transport, installation,adjustment, setting, teaching or process change-over, operation, cleaning, maintenance, decommissioning,dismantling and, as far as safety is concerned, disposal for machines mentioned in 1.1.It deals with all significant hazards, hazardous situations and events relevant to footwear moulding machines,when they are used as intended and under conditions of misuse which are reasonably foreseeable by themanufacturer (see Clause 4).1.3 The following machines are excluded from the scope of this European Standard unless used for direct-on sole moulding or reaction moulding:-- moulding machines with static injection units and static mould stations (clamping units);-- moulding machines with static metering and mixing units and mobile stations with linear configuration (mould carriers).1.4 The European Standard does not deal with hazards created by the mixing and metering unit.NOTE For metering and mixing units, see EN 1612-1.The use of machines within the scope of this European Standard in industries other than those specified in 1.1may give rise to hazards not considered during its preparation.NOTE For this application see also EN 201 and prEN 1612-2.1.5 This European Standard also applies to the following additional equipment for material handling andoperation which are an integral part of the machine:-- spraying devices, injection units, casting units, nozzle cleaners, sprue pullers, mould front edge cleaners, activating devices, robots and equipment for preparatory and subsequent treatment (see Figure M.1).1.6 This European Standard assumes the machines:-- are operated by adequately trained persons;-- are used with adequate workplace lighting (see EN 12464-1).1.7 This document is not applicable to footwear moulding machines which are manufactured before thedate of publication of this European Standard by CEN.