木质门和钢质门检测

木质门和钢质门检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 7633-2008门和卷帘的耐火试验方法

本标准规定了安装在垂直分隔构件开口处的门和卷帘总成的耐火试验方法。如：——铰链门、枢轴门；——水平滑动门、垂直滑动门，包括链接滑动门和分段门；——卷帘门；——其他滑动、折叠门；——翻板门；——可在墙中移动的门。本标准规定的试验方法也可通过类推法用于测定非承重水平门和卷帘的耐火性能，第13章中给出的直接应用范围不适用于水平门。本标准不包括机械适应性方面的要求，例如震动试验或耐久试验，它们包含在相关产品标准中。

GB 50673-2011有色金属冶炼厂电力设计规范

本规范适用于有色金属冶炼厂新建、改建和扩建工程的电力设计。

CJJ 94-2009城镇燃气室内工程施工与质量验收规范

为统一城镇燃气室内工程的施工与质量验收，保证城镇燃气室内工程的施工质量，确保安全供气，制定本规范。本规范适用于供气压小于或等于0.8MPa（表压）的新建、扩建和改建的城镇居民住宅、商业用户、燃气锅炉房（不含锅炉本体）、实验室、工业企业（不含用气设备）等用户室内燃气管道和用气设备安装的施工与质量验收。

JG/T 303-2011木复合门

本标准规定了木复合门的术语和定义、分类、代号及标记、要求、试验方法、检验规则、标志、包装、运输、贮存。本标准适用于民用建筑室内木复合门。

JG/T 453-2014平开户门

本标准规定了平开户门的术语和定义,产品分类,要求,试验方法,检验规则,标志、包装、运输及贮存。本标准适用于居住建筑平开户门及功能相近的其他民用建筑用门。

SC/T 8073-1994渔船舱室木作制作安装质量要求

本标准规定了对钢质渔船起居处所，服务处所和驾驶室、海图室、船员室等舱室及内围壁，天花板、木地板、木质门、窗及木质家具等木作的材质加工、安装、涂装以及检验的技术要求。t本标准适用于船长小于55m的钢质渔船及渔业辅助船舶。对于船长大于55m的渔船，如果防火结构没有特殊要求，也可参照执行。

HJ 454-2009环境标志产品技术要求.编制技术导则

本标准规定了环境标志标准的编制原则、编制程序与方法、构成要素及标准文本、编制说明的编制要求等内容。本标准适用于环境标志标准的制修订工作。

HJ 458-2009环境标志产品技术要求.家用洗涤剂

本标准规定了家用洗涤剂类环境标志产品的基本要求、技术内容和检验方法。本标准适用于家用洗涤剂，包括织物洗涤剂和护理剂、餐具和果蔬用洗涤剂、硬表面清洗剂和洗手液。

HJ 459-2009环境标志产品技术要求.木质门和钢质门

本标准规定了木质门和钢质门环境标志产品的基本要求、技术内容和检验方法。本标准适用于木质门、钢质门和钢木复合门。

DB11/T 301-2005燃气室内工程设计施工验收技术规定

本规定适用于北京市居民生活、商业及工业企业生产、采暖通风和空调使用的天然气、气态液化r石油气、人工煤气作燃料的新建、扩建、改建燃气室内工程的设计、施工及验收

DIN EN 1634-2-2009门、百页窗和可开启窗户建筑五金组件和元件用防火和烟雾控制试验 第2部分:建筑五金组件用防火特性试验

This European Standard specifies a method for characterizing the influence on fire performance ofitems of building hardware for incorporation into hinged or pivoted vertically installed fire doorassemblies (having either one or two leaves) or vertically installed openable window assemblies, ofknown fire resistance of up to and including 240 minutes integrity (and where relevant insulation) inaccordance with EN 1634-1. It applies to the testing of building hardware for use on hinged andpivoted doors and openable windows which include framed glazed doors and windows, but not glassdoors. It does not include a test for durability or other performance characteristics, which should beevaluated according to the product standard for the item of building hardware or as given inEN 14600.The method is suitable for characterizing building hardware for use on non-metallic door or windowassemblies consisting of cellulosic materials or mineral boards faced with cellulosic materials, hung ineither cellulosic, mineral cored or metal frames: or conventional steel doors made from sheet steel,not more than 1,5 mm thick, hung in steel frames (steel doors include doors filled with mineral boardor mineral fibre cores but not steel clad timber/cellulosic doors). The size of these assemblies can beup to that given in the field of direct application for the door leaf construction concerned.This method is not directly appropriate for evaluating building hardware for use on glass or glazeddoors with decorative perimeter framing. The appropriateness of this method of test can beestablished by reference to the flow chart given in Annex A.This European Standard does not constitute a fire resistance test for a leaf, window, frame,intumescent seal, or anything other than the selected item of building hardware. The use of anyresulting field of direct application is restricted to leaf and frame constructions which have beensuccessfully tested to EN 1634-1. The method has been developed primarily to permit the evaluationof building hardware for hinged or pivoted door assemblies and openable windows, but the method isalso suitable for evaluating some items of building hardware, which are non-edge mounted, for usewith sliding doors and openable windows.