平面光波导型光分路器检测

平面光波导型光分路器检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 28511.1-2012平面光波导集成光路器件.第1部分：基于平面光波导(PLC)的光功率分路器

GB/T 28511的本部分规定了基于平面光波导（PLC）技术的光功率分路器（以下简称PLC分路器）的术语和定义、技术要求和测试方法、可靠性试验条件和要求、检验规则以及标志、包装、贮存等条件。本部分适用于PLC分路器。

YD/T 1205-2010城域光传送网波分复用（WDM)环网技术要求

本标准规定了城域光传送网波分复用（WDM）环网的技术要求，包括WDM环网的参考结构、系统类型、中心波长、光分插复用器（OADM）基本功能、主光通道光接口参数、波长转换器（OTU）接口参数、网络保护功能、网络管理要求和网络性能等。本标准适用于城域或本地光传送网。

YD/T 2000.1-2014平面光波导集成光路器件.第1部分:基于平面光波导(PLC)的光功率分路器

本部分规定了基于平面光波导(PLC)技术的光功率分路器(以下简称PLC光分路器)的术语和定义、技术要求、测试方法、型式试验、可靠性试验、检验规则以及标志、包装、运输和储存等。本部分适用于与单模光纤耦合的PLC光分路器均分器件和组件。

DL/T 1574-2016基于以太网方式的无源光网络(EPON)系统技术条件

本标准规定了基于以太网方式的无源光网络(EPON)系统参考模型、业务类型和设备类型、技术要求及其他要求。本标准适用于电力通信接入网EPON系统建设，承载配电自动化、用电信息采集、双向营销互动、电动汽车充换电管理、分布式电源接入及储能管理、电力光纤到户等业务。

DIN CLC/TR 50510-2013终端用户光纤通道.FTTx光纤网建造导则.德文版本CLC/TR 50510-2012

The purpose of this Technical Report is to be a first guideline for those considering to install a high bandwidth (high bit-rate) FTTx-network. After studying the Technical Report operators, communities, energy companies, installers and others will understand the necessary steps to take to plan and install FTTx-networks with high quality and cost effectiveness, and to secure a uniform structure and a high quality level on such networks.

BS EN 60728-13-2010电视信号,声音信号和交互式服务用电缆网络.广播信号传输用光学系统

This part of IEC 60728 is applicable to optical transmission system for broadcast signaltransmission that consists of a head-end equipment, optical transmission lines, in-housewirings and a system outlet. The system is primarily intended for television and sound signalsusing analogue and/or digital transmission technology. This standard specifies the basicsystem parameters and methods of measurement for optical distribution system having asystem outlet in order to assess the system performance and its performance limits.The purpose of this part of IEC 60728 is to describe the system specification of FTTH (fibre tothe home) network for broadcast signal transmission. This standard is also applicable to thebroadcast signal transmission using telecommunication network if it satisfies the opticalportion of this standard. This standard describes RF transmission for broadcast andnarrowcast (limited area distribution of broadcast) signals over FTTH, and introduces xPONsystem as a physical layer media. The detailed description of physical layer is out of thescope of this standard. The scope is limited to RF signal transmission over FTTH, thus, itdoes not include IP transport technologies, such as IP Multicast and associate protocols.Some interference descriptions between telecommunication system and broadcast systemaddressed in Clause 7 and Annex D should be referred to for detailed explanations. Annex Adescribes actual service systems with design consideration based on this standard. Annex Bgives an overview of the optical transmission systems applicable for broadcast signaltransmission.