云母氧化铁颜料检测

云母氧化铁颜料检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 1863-2008氧化铁颜料

本标准规定了氧化铁颜料的分类、要求、命名、取样、试验方法、检验规则及标志、包装、运输和贮存。这些颜料以下列颜色索引号标识：红101和红102、黄42和黄43、棕6和棕7以及黑11，也包括快速分散颜料。未包括云母氧化铁颜料、透明氧化铁颜料、粒状氧化铁灰和除颜色索引号为黑11的颜料外的磁性氧化铁颜料。本标准适用于一般用途的氧化铁颜料，主要应用于涂料、建筑、造纸、橡胶和塑料等工业领域。

GB/T 28699-2012钢结构防护涂装通用技术条件

本标准规定了钢结构防护涂装的涂层体系技术要求、检验方法、检测及验收规则及典型的涂层体系，规定了涂装作业的安全、卫生和环境保护的要求。本标准适用于钢结构及钢结构附属件的防护涂装。

GB/T 31415-2015色漆和清漆 海上建筑及相关结构用防护涂料体系性能要求

本标准规定了海上建筑及相关结构(即那些暴露于海洋大气和浸于咸水或微咸水中的结构)所用防护涂料体系的性能要求。这些结构暴露于ISO 12944-2定义的C5-M腐蚀性等级和Im2浸渍等级的环境中,ISO 12944-2:1998中4.3以及附录B对这些腐蚀环境中的特殊应力进行了说明。本标准也适用于其他采用符合本标准的涂料或防护涂料体系的建筑结构。本标准着重于高耐久性涂料体系,以达到小化维护费用的目的,并因此减少安全性支出和环境影响。本标准在ISO 12944-6中用于对C5-M腐蚀性等级的要求基础之上指定了额外的测试要求。因此,满足ISO 12944-6中C5-M等级高耐久性要求的涂料体系未必满足本标准的要求,并可能需要做更进一步的测试。这些涂料体系适用的温度范围一般在-20 ℃~80 ℃,而性能试验也是为了证实涂料体系在该温度范围的适应性。在此温度范围之外使用涂料体系应得到终用户的认可。这些认可应包括在合适的温度下进行的测试。用于浸渍条件(Im2)下的涂料体系针对的是环境温度高达到50 ℃的情况。对于更高的环境温度,则需要特定的评价和性能说明。所选择考察的性能要求应考虑与阴极保护的设计参数相结合。本标准包括:——确定防护涂料体系不同组分成分的测试方法;——评定防护涂料体系预期耐久性的实验室性能测试方法;——评价性能测试结果的准则。

HG/T 3006-2012云母氧化铁颜料

本标准规定了云母氧化铁颜料的分类、要求、试验方法、检验规则及标志、包装、运输和贮存等内容。本标准适用于合成的和天然的云母氧化铁颜料。该产品呈干粉状，主要用于钢构件防护涂料。本标准不包括薄片状粒子含量低于30%的颜料。

HG/T 4340-2012环氧云铁中间漆

本标准规定了环氧云铁中间漆产品的要求、试验方法、检验规则、标志、包装和贮存等内容。 本标准适用于由环氧树脂为主要成膜物质，加入云母氧化铁颜料等制成的双组分涂料，主要用作防腐涂装体系的中间层。

ISO 10601-2007涂料用云母氧化铁颜料.规范和试验方法

This International Standard specifies the requirements and corresponding test methods for manufactured andnatural micaceous iron oxide (MIO) pigments, in dry form, used primarily in protective coatings for steelwork.In accordance with current practice, the general requirements for micaceous iron oxide pigments have beensub-divided to givea) those requirements that are essential (see Table 2)andb) those requirements that are conditional upon prior agreement between the interested parties (seeTable 3).In certain instances, reference may be made to an agreed reference pigment.

EN ISO 1248-2008氧化铁颜料.规范和试验方法

This International Standard specifies the requirements and the corresponding methods of test for all manufactured and natural iron oxide pigments, in dry form, suitable for general use. These pigments are identified by Colour Index Nos.1) red 101 and 102, yellow 42 and 43, brown 6 and 7 and black 11, and includes “rapid-dispersion pigments”.This International Standard does not cover micaceous iron oxide pigments (see Note 1), transparent iron oxide pigments, granular grey iron oxide (see Note 2) or magnetic iron oxide pigments other than those of Colour Index Pigment black 11.NOTE 1 The requirements and the corresponding methods of test for micaceous iron o

GSO ISO 10601-2014涂料用云母氧化铁颜料规范和试验方法

This International Standard specifies the requirements and corresponding test methods for manufactured and natural micaceous iron oxide (MIO) pigments, in dry form, used primarily in protective coatings for steelwork. In accordance with current practice, the general requirements for micaceous iron oxide pigments have been sub-divided to give a) those requirements that are essential (see Table 2) and b) those requirements that are conditional upon prior agreement between the interested parties (see Table 3). In certain instances, reference may be made to an agreed reference pigment.

NF T31-002-2008氧化铁颜料.试验方法和规范

La présente Norme internationale spécifie les exigences et les méthodes d'essai correspondantes pour tous les pigments à base d'oxydes de fer artificiels et naturels, sous forme sèche, destinés à un usage général. Ces pigments sont identifiés par les numéros suivants du Colour Index : Red 101 et 102, Yellow 42 et 43, Brown 6 et 7 et Black 11, et comprennent les "pigments à dispersion rapide".La présente Norme internationale ne couvre pas les pigments à base d'oxydes de fer micacés , les pigments à base d'oxydes de fer transparents, les pigments à base d'oxydes de fer gris granuleux ou les pigments à base d'oxydes de fer magnétiques autres que ceux correspondant au Pigment Black 11 du Colour Index.

TS ISO 10601-2015涂料用云母氧化铁颜料. 规格和试验方法

This standard specifies the requirements and corresponding test methods for manufactured and natural micaceous iron oxide (MIO) pigments, in dry form, used primarily in protective coatings for steelwork.

DIN EN ISO 10601-2008涂料用云母氧化铁颜料.规范和试验方法

This International Standard specifies the requirements and corresponding test methods for manufactured andnatural micaceous iron oxide (MIO) pigments, in dry form, used primarily in protective coatings for steelwork.In accordance with current practice, the general requirements for micaceous iron oxide pigments have beensub-divided to givea) those requirements that are essential (see Table 2)andb) those requirements that are conditional upon prior agreement between the interested parties (see Table 3).In certain instances, reference may be made to an agreed reference pigment.

BS EN ISO 1248-2008氧化铁颜料.规范和试验方法

This International Standard specifies the requirements and the corresponding methods of test for allmanufactured and natural iron oxide pigments, in dry form, suitable for general use. These pigments areidentified by Colour Index Nos.1) red 101 and 102, yellow 42 and 43, brown 6 and 7 and black 11, andincludes “rapid-dispersion pigments”.This International Standard does not cover micaceous iron oxide pigments (see Note 1), transparent ironoxide pigments, granular grey iron oxide (see Note 2) or magnetic iron oxide pigments other than those ofColour Index Pigment black 11.

UNI EN ISO 10601-2008涂料用云母氧化铁颜料.规范和试验方法

La presente norma è la versione ufficiale in lingua inglese della norma europea EN ISO 10601 (edizione maggio 2008). La norma specifica i requisiti e i relativi metodi d'analisi per i pigmenti in polvere a base di ossido di ferro micaceo (MIO) sia prodotti industrialmente sia naturali, principalmente utilizzati nel settore della protezione di manufatti in acciaio.

AS 2855-2004 (R2016)涂料及相关材料. 云母氧化铁颜料

RECONFIRMATION NOTICEnTechnical Committee CH-003 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.nCertain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.nApproved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 30 October 2015.nThe following are represented on Technical Committee CH-003:nAustralasian Corrosion AssociationnAustralian Institute of BuildingnAustralian Paint Manufacturersu0092 FederationnAustralian Wall and Ceiling AssociationnCSIROnInstitution of Professional Engineers New ZealandnMaster Painters AustralianMaster Painters New Zealand AssociationnNational Painting and Decorating InstitutenSafe Work AustralianSurface Coatings Association Australia