钻井液用液体润滑剂检测

钻井液用液体润滑剂检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 28911-2012石油天然气钻井工程术语

本标准规定了石油天然气钻井工程专用的术语。本标准适用于石油天然气钻井工程领域，也适用于石油天然气工业的其他领域。

GB/T 29172-2012岩心分析方法

本标准规定了岩心的钻取、处理、保存及岩心分析的准备、测试方法、技术要求及编写报告的格式、本标准适用于在油气藏勘探、开发过程中,对钻井取心及井壁取心岩样的测试分析,其他岩心的分析亦应参照执行、

GB/T 30217.1-2013石油天然气工业 钻井和采油设备 第1部分:海洋钻井隔水管设备的设计和操作

GB/T 30217的本部分适用于浮式钻井作业海洋隔水管系统的设计、选择、操作和维护。本部分的目的是供设计人员、系统零部件选择人员以及本设备使用的维护人员参考。本部分依赖于基本工程原理和海洋操作人员、承包商和制造商积累的经验。宜将海洋钻井隔水管视为一个系统。设计人员、承包商和操作人员应认识到,单个构件的推荐和选择方式应适宜于该系统的总性能。在本部分中,海洋钻井隔水管系统包括张紧器系统及UFJ或球接头的顶部连接和下部井口头连接器之间的所有设备,它不包括分流器。并且,GB/T 30217的本部分仅适用于与海底配置的水下防喷器组一起作业。本部分的第1章~第7章直接适用于大多数浮式钻井作业。8.1和8.4表述了涉及深水钻井和挤毁的特殊情况。8.2表述了无导向绳钻井所要求的特殊考虑。此外,8.3和8.5表述了寒冷天气条件和H<下标2>S条件下的作业。重要的是本部分表述的所有隔水管主载荷路径零部件与ISO 13625中规定的载荷分类是一致的。

SY/T 5336-2006岩心分析方法

这部分阐述设计一个取心程序的复杂性、决策制定及影响选择的因素。

DIN EN ISO 10407-2-2010石油和天然气工业.钻井设备.第2部分:使用的钻杆部件的检验和分类(ISO 10407-2-2008+Cor. 1-2009).英文版本EN ISO 10407-2-2008 + AC-2009,仅有光盘版

This part of ISO 10407 specifies procedures for the inspection and testing of used drill stem components.

DIN EN ISO 10414-1-2009石油和天然气工业 钻井液的现场试验 第1部分:水基液

This part of ISO 10414 provides standard procedures for determining the following characteristics ofwater-based drilling fluids:a) drilling fluid density (mud weight);b) viscosity and gel strength;c) filtration;d) water, oil and solids contents;e) sand content;f) methylene blue capacity;g) pH;h) alkalinity and lime content;i) chloride content;j) total hardness as calcium.Annexes A through K provide additional test methods which may be used for-- chemical analysis for calcium, magnesium, calcium sulfate, sulfide, carbonate and potassium;-- determination of shear strength;-- determination of resistivity;-- removal of air;-- drill-pipe corrosion monitoring;-- sampling, inspection and rejection;-- rig-site sampling;-- calibration and verification of glassware, thermometers, viscometers, retort-kit cup and drilling-fluid balances;-- permeability-plugging testing at high temperature and high pressure for two types of equipment;-- example of a report form for water-based drilling fluid.

DIN EN ISO 28781-2010石油和天然气工业.钻孔和生产设备.地下不渗透层阀门和相关设备(ISO 28781-2010).英文版本EN ISO 28781-2010

This International Standard provides the requirements for subsurface barrier valves and related equipment as they are defined herein for use in the petroleum and natural gas industries. Included are the requirements for, design, design validation, manufacturing, functional evaluation, repair, redress, handling and storage.

BS EN ISO 10407-2-2008石油和天然气工业.旋转钻井设备.使用的钻杆部件的检验和分类

This part of ISO 10407 specifies the required inspection for each level of inspection (Tables B.1 through B.15)and procedures for the inspection and testing of used drill stem elements. For the purpose of this part ofISO 10407, drill stem elements include drill pipe body, tool joints, rotary-shouldered connections, drill collar,HWDP and the ends of drill stem elements that make up with them. This part of ISO 10407 has been preparedto address the practices and technology commonly used in inspection.The practices established within this part of ISO 10407 are intended as inspection and/or testing guidance andare not intended to be interpreted to prohibit the agency or owner from using personal judgement,supplementing the inspection with other techniques, extending existing techniques or re-inspecting certainlengths.This part of ISO 10407 specifies the qualification of inspection personnel, a description of inspection methodsand apparatus calibration and standardization procedures for various inspection methods. The evaluation ofimperfections and the marking of inspected drill stem elements is included.This part of ISO 10407 provides the original equipment manufacturers' requirements regarding the minimuminformation needed for the inspection of their specialized tools in Annex A.

BS EN ISO 10414-1-2008石油和天然气工业.钻井泥浆的现场测试.第1部分:水基泥浆

This part of ISO 10414 provides standard procedures for determining the following characteristics ofwater-based drilling fluids:a) drilling fluid density (mud weight);b) viscosity and gel strength;c) filtration;d) water, oil and solids contents;e) sand content;f) methylene blue capacity;g) pH;h) alkalinity and lime content;i) chloride content;j) total hardness as calcium.Annexes A through K provide additional test methods which may be used for- chemical analysis for calcium, magnesium, calcium sulfate, sulfide, carbonate and potassium;- determination of shear strength;- determination of resistivity;- removal of air;- drill-pipe corrosion monitoring;- sampling, inspection and rejection;- rig-site sampling;- calibration and verification of glassware, thermometers, viscometers, retort-kit cup and drilling-fluidbalances;- permeability-plugging testing at high temperature and high pressure for two types of equipment;- example of a report form for water-based drilling fluid.