铁素体钢检测

铁素体钢检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GM GM6125M-1998 耐腐蚀含铬铁素体钢

Corrosion Resistant Chromium-Bearing Ferritic Steel

GB/T 8363-2007 铁素体钢落锤撕裂试验方法

本标准规定了铁素体钢落锤撕裂试验方法的原理、术语和定义、试样、试验设备、试验步骤、试验结果评定和试验报告。 本标准适用于测定壁厚不大于4Omm的输送钢管或厚度3mm～40mm的铁素体钢、贝氏体钢以及双相钢等钢板的落锤撕裂试验和结果评定

Test method for drop-weight tear tests of steel products

GB/T 8363-1987 铁素体钢落锤撕裂试验方法

本标准适用于测定厚度3～20mm，屈服点δ_s或规定非比例伸长应力δ_p0.2低于825N/mm²的铁素体钢在断裂型式由脆性转变为韧性的温度范围内一次冲断的试样断口形貌特征。 注：本落锤撕裂试验方法简称DWTT

Metallic materials--Drop-weight tear tests of ferritic steels

ONORM M 3001-1985 铁素体钢焊缝的超声波检测

Diese ?NORM ist für die Prüfung von Schmelzschwei?n?hten ferritischer St?hle genügend geringer Ultraschallschw?chung — insbesondere

Ultrasonic testing of welding seams of ferritic steels

KS D 0283-2005 铁素体钢的追重破裂试验方法

이 규격은 3.18~19.1 mm(0.125~0.750 in)두께를 가진 페라이트강의 낙

Standard test method for drop-weight tear tests of ferritic steels

NP EN 10267-2000 用于高温热成形的硬化铁素体钢

1 A presente Norma Europeia indica a condi??o técnica de procedimento dos produtos semi-acabados e barras dos a?os especiais n?o ligados incluídos nos

Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures

JIS Z 3060:1994 铁素体钢焊接用超声波检验方法

Method of ultrasonic examination for welds of ferritic steel

JIS Z 3060:2002 铁素体钢焊缝的超声波检验方法

この規格は，厚さ6mm以上のフエライ下系銅の完全溶込み溶接部を，パルス反射法を用いた基本表示の超音波探傷器(以下，探傷器という。)で，超音波探傷試験(以下，探傷という。)を手動で行う場合のきずの検出方法，位置及び寸法の測定方洗について規定する。ただし，鋼管の製造工程中の継手溶接部には適用しない

Method for ultrasonic examination for welds of ferritic steel

JIS Z 3060:2015 铁素体钢焊缝的超声波检测方法

Method for ultrasonic testing for welds of ferritic steel

IS 8791-1978 铁素体钢锻件超声波探伤操作规程

This standard deals with the ultrasonic testing of ferritic steel forgings. The procedures cover pulse echo direct contact manual ultrasonic flaw

AS 1330:2004 金属材料.铁素体钢的剪切试验方法

Specifies the method for conducting a drop weight test for carbon steel, low alloy steel and similar materials up to 19 mm thickness

Metallic materials - Drop weight tear test for ferritic steels

IS 4260-1976 铁素体钢焊缝超声波检测推荐规程

1.1 This standard prescribes the method for ultrasonic testing and inspection of welds by direct contact reflection method. This method is applicable

IS 10623-1983 铁素体钢和管线管的落锤撕裂试验

1.1 This standard prescribes a method for drop-weight tear test ( DWTT ) on ferritic steels and line pipe 500 mm OD and larger, with thickness

KS B 0896-2020 超声检查为铁素体钢的焊接的方法

Ultrasonic testing for welded joints of ferritic steel

KS D 0283-2005(2020 铁素体钢的跌落试验标准试验方法

Standard test method for drop-weight tear tests of ferritic steels

GM GM6125M-1998 耐腐蚀含铬铁素体钢

Corrosion Resistant Chromium-Bearing Ferritic Steel

GB/T 8363-2007 铁素体钢落锤撕裂试验方法

本标准规定了铁素体钢落锤撕裂试验方法的原理、术语和定义、试样、试验设备、试验步骤、试验结果评定和试验报告。 本标准适用于测定壁厚不大于4Omm的输送钢管或厚度3mm～40mm的铁素体钢、贝氏体钢以及双相钢等钢板的落锤撕裂试验和结果评定

Test method for drop-weight tear tests of steel products

GB/T 8363-1987 铁素体钢落锤撕裂试验方法

本标准适用于测定厚度3～20mm，屈服点δ_s或规定非比例伸长应力δ_p0.2低于825N/mm²的铁素体钢在断裂型式由脆性转变为韧性的温度范围内一次冲断的试样断口形貌特征。 注：本落锤撕裂试验方法简称DWTT

Metallic materials--Drop-weight tear tests of ferritic steels

ONORM M 3001-1985 铁素体钢焊缝的超声波检测

Diese ?NORM ist für die Prüfung von Schmelzschwei?n?hten ferritischer St?hle genügend geringer Ultraschallschw?chung — insbesondere

Ultrasonic testing of welding seams of ferritic steels

KS D 0283-2005 铁素体钢的追重破裂试验方法

이 규격은 3.18~19.1 mm(0.125~0.750 in)두께를 가진 페라이트강의 낙

Standard test method for drop-weight tear tests of ferritic steels

NP EN 10267-2000 用于高温热成形的硬化铁素体钢

1 A presente Norma Europeia indica a condi??o técnica de procedimento dos produtos semi-acabados e barras dos a?os especiais n?o ligados incluídos nos

Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures

JIS Z 3060:1994 铁素体钢焊接用超声波检验方法

Method of ultrasonic examination for welds of ferritic steel

JIS Z 3060:2002 铁素体钢焊缝的超声波检验方法

この規格は，厚さ6mm以上のフエライ下系銅の完全溶込み溶接部を，パルス反射法を用いた基本表示の超音波探傷器(以下，探傷器という。)で，超音波探傷試験(以下，探傷という。)を手動で行う場合のきずの検出方法，位置及び寸法の測定方洗について規定する。ただし，鋼管の製造工程中の継手溶接部には適用しない

Method for ultrasonic examination for welds of ferritic steel

JIS Z 3060:2015 铁素体钢焊缝的超声波检测方法

Method for ultrasonic testing for welds of ferritic steel

IS 8791-1978 铁素体钢锻件超声波探伤操作规程

This standard deals with the ultrasonic testing of ferritic steel forgings. The procedures cover pulse echo direct contact manual ultrasonic flaw

AS 1330:2004 金属材料.铁素体钢的剪切试验方法

Specifies the method for conducting a drop weight test for carbon steel, low alloy steel and similar materials up to 19 mm thickness

Metallic materials - Drop weight tear test for ferritic steels

IS 4260-1976 铁素体钢焊缝超声波检测推荐规程

1.1 This standard prescribes the method for ultrasonic testing and inspection of welds by direct contact reflection method. This method is applicable

IS 10623-1983 铁素体钢和管线管的落锤撕裂试验

1.1 This standard prescribes a method for drop-weight tear test ( DWTT ) on ferritic steels and line pipe 500 mm OD and larger, with thickness

KS B 0896-2020 超声检查为铁素体钢的焊接的方法

Ultrasonic testing for welded joints of ferritic steel

KS D 0283-2005(2020 铁素体钢的跌落试验标准试验方法

Standard test method for drop-weight tear tests of ferritic steels