塑料、橡胶、泡沫及漆膜检测
CNS 7407-1981 泡沫橡胶及泡沫塑料视密度测定法
本标准适用于泡沫橡胶及泡沫塑料视密度之测定
Determination of Apparent Density of Cellular Rubbers and Plastics
GB/T 6343-2009 泡沫塑料及橡胶.表观密度的测定
本标准规定了测定泡沫塑料及橡胶的表观总密度和表观的试验方法。 模制或自由发泡或挤出时形成表皮的材料表观总密度、表观芯密度可用本标准测试。 术语“表观总密度”不适用于在模制时未形成表皮的材料。 对于不规则形状的产品应采用如浮力法等方法进行测定
Cellular plastics and rubbers.Determination of apparent density
GOST 24616-2017 泡沫塑料和泡沫橡胶 硬度测定方法
Plastics cellular and foam rubber. Method for determination of hardness
UNE 53-498-1991 橡胶及泡沫塑料的线形尺寸测定
Esta norma especifica las características y la elección del procedimiento y equipo de medida para la determinación de las dimensiones lineales de l
Cellular plastics and rubbers. Determination of linear dimensions
CSN ISO 4651:1992 泡沫橡胶及塑料．动态缓冲性能测定
Zpracovatel a oborové normaliza?ní st?edisko: IMADOS s. p., Institut manipula?ních, dopravních, obalov?ch a skladovacích systém? Praha, I?O 001597
Cellular rubbers and plastics - Determination of dynamic cushioning performance
GM 9985301-1992 双层包覆塑料泡沫膜胶粘剂
Freigabemuster, für die diese Vorschrift zutrifft, müssen nach dieser Vorschrift geprüft werden und von der Produktentwicklung genehmigt sein, ehe
Adhesive, Foam Tape, Vinyl, Double Coated Revision C
NBN T 46-006-1983 泡沫塑料和橡胶．线性尺寸测量
Cellular plastics and rubbers - Determination of linear dimensions
NF T56-103:1979 橡胶或塑料基泡沫材料.刚性泡沫材料抗拉性能的测定
Cellular materials based on rubber or plastics. Determination of tensile properties of rigid cellular materials.
NF T56-104:1978 橡胶或塑料基泡沫材料 刚性泡沫材料抗穿孔应力的测定
Ruber or plastics based cellular products. Determination of punching proof stress of rigid cellular materials.
KS M ISO 1923:2010 泡沫塑料和橡胶.线性尺寸的测定
이 표준은 발포 재료의 시험편 또는 시트, 블록의 길이 측정을 위한 측정 도구와 절차의 특
Cellular plastics and rubbers-Determination of linear dimensions
KS M ISO 4651:2008 泡沫橡胶和塑料.动态弹性的测定
이 표준은 시험편 위에 추를 떨어뜨렸을 때 추의 최대 감속도를 측정함으로써 발포 고무 재료
Cellular rubbers and plastics－Determination of dynamic cushioning performance
KS M ISO 845:2012 泡沫橡胶和塑料.表观密度的测定
이 표준은 경질 발포 플라스틱의 겉보기 전체 밀도, 겉보기 코어 밀도 및 반경질 또는 연질
Cellular plastics and rubbers－Determination of apparent density
BS EN ISO 845:1995 泡沫橡胶和塑料.表观密度的测定
This International Standard specifies a method for determining the apparent overall density and the apparent core density of rigid cellular plastics
Cellular plastics and rubbers - Determination of apparent (bulk) density
NBN T 46-005-1978 泡沫橡胶和塑料．表观密度的测定
Cellular rubbers and plastics - Determination of apparent density
NBN-ISO 845:1990 泡沫橡胶和塑料．表观密度的测定
Cellular plastics and rubbers - Determination of apparent (bulk) density
CNS 7407-1981 泡沫橡胶及泡沫塑料视密度测定法
本标准适用于泡沫橡胶及泡沫塑料视密度之测定
Determination of Apparent Density of Cellular Rubbers and Plastics
GB/T 6343-2009 泡沫塑料及橡胶.表观密度的测定
本标准规定了测定泡沫塑料及橡胶的表观总密度和表观的试验方法。 模制或自由发泡或挤出时形成表皮的材料表观总密度、表观芯密度可用本标准测试。 术语“表观总密度”不适用于在模制时未形成表皮的材料。 对于不规则形状的产品应采用如浮力法等方法进行测定
Cellular plastics and rubbers.Determination of apparent density
GOST 24616-2017 泡沫塑料和泡沫橡胶 硬度测定方法
Plastics cellular and foam rubber. Method for determination of hardness
UNE 53-498-1991 橡胶及泡沫塑料的线形尺寸测定
Esta norma especifica las características y la elección del procedimiento y equipo de medida para la determinación de las dimensiones lineales de l
Cellular plastics and rubbers. Determination of linear dimensions
CSN ISO 4651:1992 泡沫橡胶及塑料．动态缓冲性能测定
Zpracovatel a oborové normaliza?ní st?edisko: IMADOS s. p., Institut manipula?ních, dopravních, obalov?ch a skladovacích systém? Praha, I?O 001597
Cellular rubbers and plastics - Determination of dynamic cushioning performance
GM 9985301-1992 双层包覆塑料泡沫膜胶粘剂
Freigabemuster, für die diese Vorschrift zutrifft, müssen nach dieser Vorschrift geprüft werden und von der Produktentwicklung genehmigt sein, ehe
Adhesive, Foam Tape, Vinyl, Double Coated Revision C
NBN T 46-006-1983 泡沫塑料和橡胶．线性尺寸测量
Cellular plastics and rubbers - Determination of linear dimensions
NF T56-103:1979 橡胶或塑料基泡沫材料.刚性泡沫材料抗拉性能的测定
Cellular materials based on rubber or plastics. Determination of tensile properties of rigid cellular materials.
NF T56-104:1978 橡胶或塑料基泡沫材料 刚性泡沫材料抗穿孔应力的测定
Ruber or plastics based cellular products. Determination of punching proof stress of rigid cellular materials.
KS M ISO 1923:2010 泡沫塑料和橡胶.线性尺寸的测定
이 표준은 발포 재료의 시험편 또는 시트, 블록의 길이 측정을 위한 측정 도구와 절차의 특
Cellular plastics and rubbers-Determination of linear dimensions
KS M ISO 4651:2008 泡沫橡胶和塑料.动态弹性的测定
이 표준은 시험편 위에 추를 떨어뜨렸을 때 추의 최대 감속도를 측정함으로써 발포 고무 재료
Cellular rubbers and plastics－Determination of dynamic cushioning performance
KS M ISO 845:2012 泡沫橡胶和塑料.表观密度的测定
이 표준은 경질 발포 플라스틱의 겉보기 전체 밀도, 겉보기 코어 밀도 및 반경질 또는 연질
Cellular plastics and rubbers－Determination of apparent density
BS EN ISO 845:1995 泡沫橡胶和塑料.表观密度的测定
This International Standard specifies a method for determining the apparent overall density and the apparent core density of rigid cellular plastics
Cellular plastics and rubbers - Determination of apparent (bulk) density
NBN T 46-005-1978 泡沫橡胶和塑料．表观密度的测定
Cellular rubbers and plastics - Determination of apparent density
NBN-ISO 845:1990 泡沫橡胶和塑料．表观密度的测定
Cellular plastics and rubbers - Determination of apparent (bulk) density
