建筑产品和建筑构件的防火分类检测

建筑产品和建筑构件的防火分类检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 5169.45-2019电工电子产品着火危险试验 第45部分:着火危险评定导则 防火安全工程

GB/T 5169的本部分旨在为产品委员会提供一个通用指南，涉及内容包括：?　防火安全工程的原理和使用说明；?　防火安全工程在电工电子产品设计方面的使用导则；?　防火安全工程的术语和概念；?　防火安全工程评估所需的性能、数据和试验指引；?　参考文献。本部分并不作为详细的技术设计指南，而是旨在为产品委员会提供有关防火安全工程方法和基于性能的试验信息的指导，以用于基于性能的设计和电工材料、部件、成品和系统的着火危险评定。更多关于防火安全工程的信息参见ISO/TR 13387系列标准(见第2章及参考文献[1-6])和ISO 23932。

GB/T 36271.1-2018交流1 kV以上电力设施 第1部分:通则

GB/T 36271的本部分规定了标称电压1 kV以上交流系统中电力设施设计与安装要求，以保障投运设施的安全和正常运行。本部分的电力设施包括：a)　变电站，包括铁路供电变电站。b)　柱上、电线杆、杆塔上的电力设施：位于封闭的电气运行区域外的开关和(或)变压器类设备。c)　一个厂址上的一个或多个电厂设施：包括发电机、变压器组及相关的开关设备和电气辅助系统。不包括不同厂址发电厂之间的电气连接设施。d)　厂矿企业或其他工业、农业、商业、公共设施的电气系统。e)　海上风力发电场等海上平台电力设施。电力设施还包括下列设备：——旋转电机；——开关设备；——变压器和电抗器；——换流器；——电缆；——布线系统；——蓄电池；——电容器；——接地系统；——封闭的电气运行区域的建筑物与围墙；——相关的保护、控制及辅助系统；——大型空心电抗器。本部分不适用于下列设施的设计与安装：——独立设施之间的架空线路与地下电缆；——电气化铁路；——矿山开采设备及设施；——荧光灯设施；——IEC 60092(所有部分)规定的船上设施和GB/T 25444(所有部分)规定的海上设施；——静电设备，如静电除尘器和喷涂装置；——试验现场；——医疗设备，如医用X光设备。本部分不适用于预装式开关设备及高压/低压预装式变电站内部设计。本部分不适用于带电作业。低压电气设施可参照GB/T 16895执行。

GB 50360-2016水煤浆工程设计规范

本规范适用范围如下：制浆规模0.25Mt/a及以上，生产燃料水煤浆或气化水煤浆的新建、改建和扩建工程设计；单台锅炉容量35t/h及以上，以水煤浆为燃料的新建、改建、扩建的发电、供热工程设计。

GB/T 50878-2013绿色工业建筑评价标准

本标准适用于新建、扩建、改建、迁建、恢复的建设工业建筑和既有工业建筑的各行业工厂或工业建筑群中的主要生产厂房、各类辅助生产建筑。本标准规定了各行业评价绿色工业建筑需要达到的共性要求。

GB/T 51100-2015绿色商店建筑评价标准

本标准适用于绿色商店建筑的评价。

GB/T 51148-2016绿色博览建筑评价标准

本标准适用于绿色博览建筑的评价。

GB/T 51165-2016绿色饭店建筑评价标准

本标准适用于绿色饭店建筑的评价。

GB/T 51232-2016装配式钢结构建筑技术标准

本标准适用于抗震设防烈度为6度到9度的装配式钢结构建筑的设计、生产运输、施工安装、质量验收与使用维护。

JGJ/T 229-2010民用建筑绿色设计规范

本标准适用于新建、改建和扩建民用建筑的绿色设计。

JGJ/T 316-2013单层防水卷材屋面工程技术规程

本规程适用于新建、扩建和改建的工业建筑、民用建筑采用单层防水卷材的屋面工程的设计、施工及质量验收。

JGJ/T 398-2017装配式住宅建筑设计标准

本标准适用于采用装配式建筑结构体与建筑内装体集成化建造的新建、改建和扩建住宅建筑设计。

DB11/T 512-2007建筑装饰工程石材应用技术规程

本规程适用于建筑装饰工程中装饰石材的材料、设计、加工制作、施工、验收以及防护、保养和翻新。

CEN/TR 15985-2010热绝缘产品.工厂生产多孔聚苯乙烯(EPS).自愿认证原材料

It is essential that EPS products with a reaction to fire performance better than Euroclass F be manufactured from raw materials with a chemical composition, which is under the control of the raw material producer.This Technical Report specifies the conditions allowing reduction of the FPC frequency for testing the reaction to fire of specimens made from flame retardant EPS raw material. The preconditions are that products are manufactured solely from a specified, certified raw material, within defined density limits, and produced in the way specified by the raw material supplier. The frequency of testing the final product can be reduced in accordance with EN 13163:2008, Annex B, Table B.2 footnote to table h. It is essential that the reaction to fire performance of the raw material be labelled according to 9.2 in the certificate from an approved body (see EN 13172:2008, 5.3.3 and Annex A). The certification of the raw material relates only to products for which the reaction to fire Euroclass E according to EN 13501-1 is being claimed. The manufacturer of the EPS boards / products continues to be responsible for the FPC of the EPS boards / products.This Technical Report is in accordance with the general rules of EN 13172.

EN 81-31-2010电梯制造与安装安全规范.仅货运电梯.第31部分:仅运送货物的电梯

This European Standard applies to new electric accessible goods only lifts with traction or positive drive and new hydraulic accessible goods only lifts; permanently installed in restricted areas and/or only used by authorised and instructed persons (users); serving fixed and permanent landing levels; having a load carrying unit made of a single load carrying area; designed for the transportation of goods only; moving along a fixed path (e. g. scissor lifts; lifts with guide rails) and inclined not more than 15° to the vertical; with rated speed not exceeding 1 m/s.This European Standard covers accessible goods only lifts with rated load exceeding 300 kg and not intended to move persons.This standard deals with all significant hazards; hazardous situations and events with the exception of those listed in below; relevant to accessible goods only lifts; when they are used as intended and under the conditions foreseen by the manufacturer.

EN 520-2004石膏板.定义,要求和试验方法.包含修改件A1-2009

This document specifies the characteristics and performance of gypsum plasterboards intended to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster.This document covers the following product performance characteristics: reaction to fire, water vapour permeability, flexural strength (breaking load), impact resistance and thermal resistance. The following performance characteristics are linked to systems assembled with plasterboards: shear strength, fire resistance, impact resistance, direct airborne sound insulation and acoustic absorption to be measured according to the corresponding European test methods. If required, tests should be done on assembled systems simulating the end use conditions.This document covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Construction Industry and the reference tests for these characteristics. It provides for the evaluation of conformity of the product toThis document.This document does not cover plasterboards, which have been subject to any secondary manufacturing operations (e. g. insulating composite panels, plasterboards with thin lamination, etc.).