伏特加（俄得克检测

伏特加（俄得克检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB 2760-2014食品安全标准 食品添加剂使用标准

本标准规定了食品添加剂的使用原则、允许使用的食品添加剂品种、使用范围及大使用量或残留量。

GB 2761-2017食品安全标准 食品中真菌毒素限量

本标准规定了食品中黄曲霉毒素B<下标1>、黄曲霉毒素M<下标1>、脱氧雪腐镰刀菌烯醇、展青霉素、赭曲霉毒素A及玉米赤霉烯酮的限量指标。

GB/T 11858-2008伏特加(俄得克)

本标准规定了伏特加的术语和定义、要求、分析方法、检验规则以及标志、包装、运输和贮存。本标准适用于伏特加的生产、检验与销售。

SB/T 10391-2005酒类商品批发经营管理规范

　　本标准规定了酒类批发经营者从事酒类商品批发交易活动应具备的经营技术条件与应实行的经营管理技术要求。 本标准适用于酒类商品的批发经营者。

SB/T 10736-2012酒吧经营服务规范

本标准规定了酒吧的术语和定义、吧台基本用具、基本酒水配置、环境和设备安全要求、卫生要求、酒吧服务人员基本要求、调酒师知识和技能要求、酒吧人员服务流程与规范、制度规范。本标准适用于以提供酒水即时消费服务为主的餐饮服务经营场所。

WB/T 1053-2015酒类商品物流信息追溯管理要求　

本标准规定了酒类商品物流信息追溯体系、信息采集、信息管理的基本要求。本标准适用于酒类商品物流过程中的信息追溯管理与信息共享，生产和销售过程的信息追溯可参照使用。

SN/T 3625-2013出口食品中细辛醚含量的测定 液相色谱法

本标准规定了食品中白菖蒲油主要成分α-细辛醚和β-细辛醚含量的液相色谱测定方法。本标准适用于伏特加、白酒、猪肉、熏鱼肉、绿豆糕、调料粉、奶粉等出口食品中α-细辛醚和β-细辛醚含量的测定。

UL 17-2008燃油器具用通风或烟囱连接件调节器

The dodument cover requirements for electrically operated damper assemblies, that are intended for installation in the vent or chimney connector of automatically operated oil-fired appliances employing an atomizing type oil burner. The damper assembly is intended to restrict or block the connector opening when the burner is not firing. These requirements cover automatic vent or chimney connector dampers for oil-fired appliances having a flue gas temperature not in excess of 538 ?C (1000 ?F), unless marked for a lower temperature. The vent or chimney connector dampers covered under these requirements are not for use on oil-fired appliances that employ vaporizing type oil burners. Automatic vent or chimney connector dampers are intended for installation in accordance with the following standards of the National Fire Protection Association: a) Oil-Burning Equipment, NFPA 31. b) Chimneys, Fireplaces, and Vents, NFPA 211. c) National Electrical Code, ANSI/NFPA 70. A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shock or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.

UL 38-2008火灾报警系统用手动信令盒

1.1 These requirements cover manual signaling boxes for fire alarm systems intended for permanentinstallation and used in ordinary locations in accordance with the National Electrical Code, NFPA 70, and the National Fire Alarm Code, NFPA 72.1.2 A manual signaling box is an assembly of a mechanism having electrical contacts designed totransmit a signal when an integral part is operated manually. The signaling contacts are intended to beconnected to circuits of fire alarm systems. The types of boxes covered by these requirements are coded boxes and non-coded boxes, including signaling boxes, fire and guard’s tour reporting stations, and guard’s tour reporting stations for suppressed-signal tour combinations.1.3 A manual signaling box having a pre-wound signaling mechanism and equipped with a trippingelectromagnet to permit automatic actuation by separate detectors, and similar combination devices, shall be evaluated with regard to compliance with the applicable requirements for both manual signaling boxes and electrically-actuated transmitters.1.4 A manual signaling box shall be constructed for use with system-control units, electrically-actuatedtransmitters, or similar units that will permit its application in compliance with applicable codes andstandards of the National Fire Protection Association.1.5 These requirements do not cover electrically-actuated transmitters.

UL 296-2003燃油炉

These revisions are to the UL 296 proposals announced in the March 18, 2005 issue of ANSI's "Standards Action.

UL 372 (ND)-2007家用和类似用途自动电控制器.第2部分:燃烧器点火系统和组件的特殊要求

Automatic Electrical Controls for Household and Similar Use.Part 2: Particular Requirementsfor Burner Ignition Systems and Components

UL 399-2008饮用水冷却器

1.1 These requirements cover self-contained drinking-water coolers which employ hermetic refrigerantmotor-compressors and which are designed for connection to alternating-current circuits rated not greaterthan 600 volts in accordance with the National Electrical Code, NFPA 70. The requirements also apply towater coolers which supply both hot and cold water.1.2 These requirements do not include additional requirements applicable to equipment designed for usein hazardous locations as defined in the National Electrical Code, NFPA 70.1.3 A product that contains features, characteristics, components, materials, or systems new or differentfrom those covered by the requirements in this standard, and that involves a risk of fire, electric shock, orinjury to persons shall be evaluated using the appropriate additional component and end-productrequirements as determined necessary to maintain the acceptable level of safety as originally anticipatedby the intent of this standard. A product whose features, characteristics, components, materials, orsystems conflict with specific requirements or provisions of this standard cannot be judged to comply withthis standard. Where considered appropriate, revision of requirements shall be proposed and adopted inconformance with the methods employed for development, revision, and implementation of this standard.