医用X射线诊断设备性能检测

医用X射线诊断设备性能检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

YY/T 0481-2004 医用诊断X射线设备.测定特性用辐射条件

本标准适用于医用诊断X射线设备系统或部件的特性测定试验程序，该程序要求定义明确的辐射条件。 除了乳腺摄影外。本标准不适用于为了改善辐射束的特性而特意选用辐射吸收元素的不连续性的情况(例如用稀土滤过板)。 有屏片系统的速度测量不包括在本标准中考虑。这个主题将由一份ISO标准概括

Medical diagnostic X-ray equipment-Radiation conditions for use in the determination of characteristics

YY/T 0481-2016 医用诊断X射线设备.测定特性用辐射条件

本标准适用于医用诊断X射线设备系统或部件的特性测定试验程序，该程序要求定义明确的辐射条件。除了乳腺摄影外，本标准不适用于为了改善辐射束的特性而特意选用具有不连续性辐射吸收元素的情况（例如用稀土滤过板）。有屏-片系统的感光度测量的辐射条件不包括在本标准中。本标准涉及用什么辐射条件产生辐射束的方法，这些

Medical diagnostic X-ray equipment.Radiation conditions for use in the determination of characteristics

EN 61267:1994 医用诊断X射线设备-测定特性用辐射条件

Medical Diagnostic X-Ray Equipment - Radiation Conditions for Use in the Determination of Characteristics

NF C74-120*NF EN 61267:2006 医用诊断X射线设备 测定特性用辐射条件

Medical diagnostic X-ray equipment - Radiation conditions for use in the determination of characteristics

KS C IEC 61267-2005(2016 医用诊断X射线设备特性测定用辐射条件

Medical diagnostic X-ray equipment－Radiation conditions for use in the determination of characteristics

KS C IEC 61267-2005(2021 医用诊断X射线设备特性测定用辐射条件

Medical diagnostic X-ray equipment－Radiation conditions for use in the determination of characteristics

YY/T 0481-2016/IEC 61267:2005 医用诊断X射线设备 测定特性用辐射条件

Radiation conditions for the determination of characteristics of medical diagnostic X-ray equipment

YY/T 0063-2007 医用电气设备 医用诊断X射线管组件 焦点特性

本标准适用于工作 X 射线管电压不高于 200 kV（包括 20O kV）医用诊断 X 射线管组件的焦点。 本标准叙述评价焦点特性的试验方法和描述符合性的方法

Medical electrical equipment X-ray tube assemblies for medical diagnosis- Characteristics of focal spots

AS/NZS 4358:1996 医疗诊断X射线设备．测定特性用辐射条件

Specifies methods for identifying the most important characteristics of diagnostic X-ray equipment and the relevant associated test methods, so

Medical diagnostic X-ray equipment - Radiation conditions for use in the determination of characteristics

JJG 744-2004 医用诊断X射线辐射源

Medical Diagnostic X-ray Radiation Source

YY 91029-1999 400mA医用诊断X射线机

本标准规定了400mA医用诊断X射线机的有关术语、技术要求、试验方法、检验规则等。 本标准适用于不低于100kV/400mA的医用诊断X射线机，该产品可供医疗单位作透视、摄影用

400 mA X-ray equipment for medical diagnosis

GOST R IEC 60336-2010 医用电气设备.医用诊断X射线管组件.焦点特性

X-ray tube assemblies for medical diagnosis. Sharacteristics of focal spots

SIS SS IEC 336:1986 X射线设备．医疗用诊断型X射线管组件焦点特征

This standard deals with methods of determining characteristics of FOCAL SP?TS of diagnostic X-RAY TUBE ASSEMBLIES for medical use, operating at X-RAY

X-ray equipment - Characteristics of focal sp?ts in diagnostic X-ray tube assemblies for medical use

WS 76-2020 医用X射线诊断设备质量控制检测规范

Quality control and testing specifications for medical X-ray diagnostic equipment

DIN EN 60336:2006-09 医用电气设备-医学诊断用X射线管组件-焦点特性

Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Characteristics of focal spots (IEC 60336:2005); German version EN 60336:2005 / Note: To be replaced by DIN EN 60336 (2020-04).

YY/T 0481-2004 医用诊断X射线设备.测定特性用辐射条件

本标准适用于医用诊断X射线设备系统或部件的特性测定试验程序，该程序要求定义明确的辐射条件。 除了乳腺摄影外。本标准不适用于为了改善辐射束的特性而特意选用辐射吸收元素的不连续性的情况(例如用稀土滤过板)。 有屏片系统的速度测量不包括在本标准中考虑。这个主题将由一份ISO标准概括

Medical diagnostic X-ray equipment-Radiation conditions for use in the determination of characteristics

YY/T 0481-2016 医用诊断X射线设备.测定特性用辐射条件

本标准适用于医用诊断X射线设备系统或部件的特性测定试验程序，该程序要求定义明确的辐射条件。除了乳腺摄影外，本标准不适用于为了改善辐射束的特性而特意选用具有不连续性辐射吸收元素的情况（例如用稀土滤过板）。有屏-片系统的感光度测量的辐射条件不包括在本标准中。本标准涉及用什么辐射条件产生辐射束的方法，这些

Medical diagnostic X-ray equipment.Radiation conditions for use in the determination of characteristics

EN 61267:1994 医用诊断X射线设备-测定特性用辐射条件

Medical Diagnostic X-Ray Equipment - Radiation Conditions for Use in the Determination of Characteristics

NF C74-120*NF EN 61267:2006 医用诊断X射线设备 测定特性用辐射条件

Medical diagnostic X-ray equipment - Radiation conditions for use in the determination of characteristics

KS C IEC 61267-2005(2016 医用诊断X射线设备特性测定用辐射条件

Medical diagnostic X-ray equipment－Radiation conditions for use in the determination of characteristics

KS C IEC 61267-2005(2021 医用诊断X射线设备特性测定用辐射条件

Medical diagnostic X-ray equipment－Radiation conditions for use in the determination of characteristics

YY/T 0481-2016/IEC 61267:2005 医用诊断X射线设备 测定特性用辐射条件

Radiation conditions for the determination of characteristics of medical diagnostic X-ray equipment

YY/T 0063-2007 医用电气设备 医用诊断X射线管组件 焦点特性

本标准适用于工作 X 射线管电压不高于 200 kV（包括 20O kV）医用诊断 X 射线管组件的焦点。 本标准叙述评价焦点特性的试验方法和描述符合性的方法

Medical electrical equipment X-ray tube assemblies for medical diagnosis- Characteristics of focal spots

AS/NZS 4358:1996 医疗诊断X射线设备．测定特性用辐射条件

Specifies methods for identifying the most important characteristics of diagnostic X-ray equipment and the relevant associated test methods, so

Medical diagnostic X-ray equipment - Radiation conditions for use in the determination of characteristics

JJG 744-2004 医用诊断X射线辐射源

Medical Diagnostic X-ray Radiation Source

YY 91029-1999 400mA医用诊断X射线机

本标准规定了400mA医用诊断X射线机的有关术语、技术要求、试验方法、检验规则等。 本标准适用于不低于100kV/400mA的医用诊断X射线机，该产品可供医疗单位作透视、摄影用

400 mA X-ray equipment for medical diagnosis

GOST R IEC 60336-2010 医用电气设备.医用诊断X射线管组件.焦点特性

X-ray tube assemblies for medical diagnosis. Sharacteristics of focal spots

SIS SS IEC 336:1986 X射线设备．医疗用诊断型X射线管组件焦点特征

This standard deals with methods of determining characteristics of FOCAL SP?TS of diagnostic X-RAY TUBE ASSEMBLIES for medical use, operating at X-RAY

X-ray equipment - Characteristics of focal sp?ts in diagnostic X-ray tube assemblies for medical use

WS 76-2020 医用X射线诊断设备质量控制检测规范

Quality control and testing specifications for medical X-ray diagnostic equipment

DIN EN 60336:2006-09 医用电气设备-医学诊断用X射线管组件-焦点特性

Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Characteristics of focal spots (IEC 60336:2005); German version EN 60336:2005 / Note: To be replaced by DIN EN 60336 (2020-04).