不锈钢厨房设备 餐车检测

GB/T 4549.1-2004铁道车辆词汇 第1部分;基本词汇

本部分界定了铁道车辆(以下简称车辆)的种类、方向和位置、主要尺寸、重量、性能及参数、试验等综合性方面的名词的术语。 本部分适用于有关铁道车辆的标准、技术文件及科技出版物等。

GB/T 15732-1995汉字键盘输入用通用词语集

本标准规定了汉字键盘输入用通用词语。 本标准适用于汉字键盘输入、方案优化和评测。中文信息处理的其他领域也可参照执行。

GB/T 30785-2014食品加工设备术语

本标准规定了食品加工设备、装置和相关组件的术语和定义。本标准适用于商用食品加工设备的信息处理与信息交换。

GB 51039-2014综合医院建筑设计规范

本规范适用于新建、改建和扩建的综合医院的建筑设计。

QB/T 2139.1-1995不锈钢厨房设备.调理作业类名词术语和型号编制

本标准规定了用调理作业类不锈钢厨房设备的产品分类、部件名称和型号编制。t本标准适用于用不锈钢调理作业类厨房设备。

QB/T 2139.7-1995不锈钢厨房设备.餐车

本标准规定了不锈钢餐车的产品分类、技术要求、试验方法、检验规则、标志和包装。t本标准适用于用不锈钢餐车。

SB/T 10443-2007早餐经营规范

本标准规定了开展早餐经营活动应满足的基本要求和早餐店、早餐亭、早餐车、早餐经营供应单位、食品供应商等的具体要求。本标准适用于早餐店、早餐亭、早餐车、早餐经营供应单位、食品供应商。

TB/T 1719-1998铁道客车采暖装置通用技术条件

本标准规定了铁道客车独立温水采暖装置的主要技术参数、一般技术耍求、零部件及材料技术要求、电气性能要求、组装技术要求和检验规则。t本标准适用于装有独立燃煤温水采暖装置和独立煤电两用温水采暖装置的新造客车。装有独立撼油温水锅护新造客车也可参照使用。

TB/T 2041-1997铁路餐车电冰箱型式及技术条件

本标准规定了铁路餐车电冰箱的型式和基本参数，材料、设计、制造、性能要求、检脸规则、标志、包装、运物、贮存与保修。t本标准适用于铁路餐车食品储藏保鲜使用的电机驭动压缩机分装式电冰箱(以下简称“电冰箱").特种车辆怪车分装式电冰箱应参服使用。t本标准不适用食品冷冻和冷截冷冻电冰箱。

TB/T 3418-2015餐车结构性能设计要求

本标准规定了铁道餐车车内设备的基本要求、结构性能、安全要求和卫生要求。本标准适用于新造铁道客车餐车及动车组餐车，其他餐车可以参照执行。

TB 10010-2016铁路给水排水设计规范

本规范适用于新建、改建铁路给水排水工程设计。

TB 10621-2014(条文说明)高速铁路设计规范（条文说明）

本规范适用于新建旅客列车设计速度为250 km/h~350 km/h的标准轨距高速铁路设计,明确了高速铁路运行动车组列车,一般不开行货车和机车牵引的客车。明确了速度分级为250 km/h、300 km/h、350 km/h 三挡。

DB11/T 218-2003旅游星级餐馆服务质量

本标准规定了北京旅游星级餐馆服务要求、设施设备维修保养要求、卫生要求、安全服务要求、客人投诉处理要求。n本标准适用于北京地区各种经济性质的旅游餐饮企业（含旅游星级和定点的酒楼、餐厅、饭庄、茶楼、酒吧、咖啡吧）。

DIN 18867-1-2012大型烹饪设备.车载烹饪设备.第1部分:快餐车,要求与测试

This standard contains requirement for design and function of runabout carts for using in professional kitchens, including the testing, technical safety and hygienic characteristic feature. Against DIN 18867-1:1997-01 the section 2 and the safety requirements were reviewed, the tests to the requirements attributed and hygienic aspects integrated.

DIN 18867-3-2011商用烹饪设备.车载烹饪设备.第3部分:托盘和食品容器送餐车的试验和要求

This standard contains requirement for design and function of unheated tray service and food container trolleys for commercial use; in particularly for the distribution and transportation of food, including the testing, technical safety and hygienic characteristic feature. These alliances are moved only by hand. Additional requirement for cooling components are integrated. Against DIN 18867-3:1997-01 the section 2 and the safety requirements were reviewed, the tests to the requirements attributed and hygienic aspects integrated.

DIN 18867-4-2011商业厨房设备.车载烹饪设备.第4部分:可拆卸托盘送餐车试验和要求

This standard contains requirement for design and function of tray removal trolley for using in professional kitchens, including the testing, technical safety and hygienic characteristic feature. Against DIN 18867-2:1997-01 the section 2 were reviewed, the tests to the requirements attributed and hygienic aspects integrated.

DIN EN 12312-2-2014航空器地勤支援设备.专门要求.第2部分:餐车

This European Standard specifies health and safety requirements, as well as some functional and performance requirements, for catering vehicles intended for cabin re-supply and servicing or loading and unloading of catering equipment and supplies on all aircraft types commonly in service in civil air transport. The minimum essential criteria are considered to be of primary importance in providing safe, serviceable, economical, and practical catering vehicles. Deviations from the recommended criteria should occur only after careful consideration, extensive testing, risk assessment and thorough service evaluation have shown alternative methods or conditions to be satisfactory. Such deviations are outside the scope of this standard and a manufacturer should be able to demonstrate an equivalent level of protection. This European Standard is a Type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this document. When provisions of this Type C standard are different from those stated in Type A or B standards, the provisions of this Type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this Type C standard. Deviations from requirements do not fall within the presumption of conformity given by the standard.