工业洗衣机检测

工业洗衣机检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB 25115.5-2010工业洗涤机械的安全要求 第5部分：熨平机、送料机和折叠机

GB 25115的本部分和第一部分给出了熨平机、送料机和折叠机的重要危险。本部分适用于下列产品：工作状态接触面积大于0.25m<上标 2>的滚筒式和槽式熨平机；将平面物料自动送入熨平机或折叠机的送料机；与滚筒式和槽式熨平机配套的自动折叠平面物料的折叠机；自动折叠小件物料的折叠机；多功能熨平机。本部分用以指导设计者如何对危险作出危险性评价以及选择措施以达到所要求的安全级别。本标准不适用于化学物品供给泵、蒸汽阀和供给管道、通风系统、物料进给系统、卸载系统和排气系统等辅助设备。

GB/T 33452-2016洗染术语

本标准界定了洗染行业常用的术语和定义。本标准适用于洗染行业经营、培训及其相关的领域。

GB/T 36931-2018工业洗涤机械术语

本标准界定了工业洗涤机械的术语和定义。本标准适用于工业/商用类的洗涤机械。本标准不适用于制衣行业的专用整理机，也不适用于家用和类似用途的电器。

QB/T 2323-2017工业洗衣机

本标准规定了工业洗衣机及洗涤脱水机的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于工业洗衣机和洗涤脱水机。本标准不涉及隧道式洗涤机组。

QB/T 2329-1997服装机械.钻孔机

本标准规定了服装机械中钻孔机的产品分类、技术要求、试验方法、检验规则及标志、包装、运输和贮存。t本标准适用于服装加工业的钻孔机，也适用于无调温装置的钻孔机(以下简称钻孔机)。

QB/T 2330-2017工业烘干机

本标准规定了工业烘干机(以下简称烘干机)的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于工业洗衣场所的烘干机。

QB/T 5675-2022工业洗衣机节能与用水循环利用技术规范

本文件描述了工业洗衣机节能与用水循环利用的流程、原理，规定了技术要求、验收规则。本文件适用于工业洗衣机、洗脱机、隧道式洗涤机、离心式脱水机、压干机等有关洗涤设备的节能与洗涤用水循环系统的建设与改造。

SB/T 10783-2012洗染业术语

本标准给出了洗染业常用的术语和定义。本标准适用于洗染业经营、培训及其相关的领域。

ISO 9398-1-2003工业洗衣机规范.容量和能耗特性定义和测试.第1部分:家用织物熨烫机

This part of ISO 9398 defines the characteristics of flatwork ironing machines and gives the usual test methods for determining these characteristics with regard to machine capacity, power consumption and hourly productivity. It is applicable for use as a reference in the drafting of purchasing orders for flatwork ironing machines having a contact surface area greater than 0,25 m. It does not cover safety requirements (see ISO 10472-5).nNOTE Where more detailed information on the effect of laundry machines on textiles is required, see ISO 7772 after agreement between the parties involved.

ISO 9398-2-2003工业洗衣机规范.容量和能耗特性定义和测试.第2部分:间歇式转鼓烘燥机

This part of ISO 9398 defines the characteristics of batch drying tumblers and gives the usual test methods for these characteristics with regard to machine capacity, power consumption and productivity. It is applicable for use as a reference in the drafting of purchasing orders for batch drying tumblers whose net usable cage volume is greater than 160 dm (litres). It does not cover safety requirements (see ISO 10472-4).nNOTE If more detailed information on the effect of laundry machines on textiles is required, see ISO 7772 after agreement between the parties involved.

ISO 9398-3-2003工业洗衣机规范.容量和能耗特性定义和测试.第3部分:管道式洗涤机

This part of ISO 9398 defines the characteristics of washing tunnels and gives the usual test methods for determining machine power consumption and hourly productivity. It is applicable for use as a reference in the drafting of purchasing orders for washing tunnels. It does not cover safety requirements (see ISO 10472-3).nNOTE Where more detailed information on the effect of laundry machines on textiles is required, see ISO 7772 after agreement between the parties involved.

ISO 9398-4-2003工业洗衣机规范.容量和能耗特性定义和测试.第4部分:洗涤脱水联合机

This part of ISO 9398 defines the characteristics of washer-extractors and gives the usual test methods for these characteristics with regard to machine capacity, power and water consumption, and hourly productivity. It is applicable for use as a reference in the drafting of purchasing orders for washer-extractors whose net usable cage volume is greater than 60 dm (litres). It does not cover safety requirements (see ISO 10472-2).nNOTE If more detailed information on the effect of laundry machines on textiles is required, see ISO 7772 after agreement between the parties involved.

ISO 10472-1-1997工业洗衣机安全要求 第1部分:通用要求

The individual parts of ISO 10472 identify all significant hazards associated with laundry machinery designed for use in industrial laundry premises, which includes hotels, hospitals, nursing homes, prisons and similar premises, as well as machines designed for use in self-service establishments subject to the minimum capacities stated in the separate parts of ISO 10472. Dry-cleaning presses and garment presses are also included.nCertain specialized finishing machines used for shaped items are excluded. Household and similar electrical appliances (see IEC 335) are not covered by ISO 10472.nThe individual parts of ISO 10472 complement the basic requirements laid down in ISO/TR 12100-1 and ISO/TR 12100-2. They give guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures to attain the required safety level. "Use of machinery" comprises both intended use and reasonably foreseeable misuse.nThe individual parts of ISO 10472 do not give specific technical advice about:n— the phases of life of the machine other than use;n— noise;n— laser;n— maintenance operations and elimination of process faults;n— ergonomics;n— explosions;n— isolation of energy sources;n— pressure vessels;n— hot surfaces necessarily exposed for production purposes [but see ISO 10472-6 (press head surface)].nThe individual parts of ISO 10472 do not cover electromagnetic compatibility.nHazards due to the use of gas within a machine which is not included in the range described in 5.5.2 of this part of ISO 10472 are not covered by the individual parts of ISO 10472.nExamples of layouts of a large- and a medium-size plant which show the machines of parts 2 to 6 of ISO 10472 are given in annex B.nThe individual parts of ISO 10472 apply to machines which are manufactured after the date of issue of the relevant parts.nNOTE — For significant hazards concerned with construction, transport, commissioning, decommissioning, dismantling and disposal of the machine, see ISO/TR 12100-1:1992, 3.11, 3.12 and ISO/TR 12100-2:1992, 5.5.nThe guidance contained in the individual parts of ISO 10472 is based on the assumption that the designer has completed a risk analysis of the machine under consideration. This will enable him to identify and fulfil the significant requirements for the machine as stipulated by the individual parts of ISO 10472.

ISO 10472-2-1997工业洗衣机安全要求 第2部分:洗衣机和洗涤脱水机

This part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with washing machines and washer-extractors of all configurations having a net usable cage volume > 60 |.nThis part of ISO 10472 does not cover particular hazards for drawer-type washer-extractors.nThis part of ISO 10472 does not cover the hazards caused by processing work which may create an explosive or flammable atmosphere inside the machine.nThis part of ISO 10472 complements the basic requirements as laid down in ISO/TR 12100-1 and ISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures for attaining the required safety level.nThis part of ISO 10472 does not apply to ancillary equipment, e.g. chemical supply pumps, steam valves and supply pipe work, vent systems, work feed systems and discharge systems and ducting to the atmosphere.

ISO 10472-3-1997工业洗衣机安全要求 第3部分:管道式洗涤(联合)机及相关机械

This part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with washing tunnel lines including component machines such as:n— continuous tunnel washing machines;n— squeeze presses or centrifugal extraction machines;n— transfer conveyor systems;n— automatic transfer tumblers;n— loading or unloading system interfaces;n— access platform and ladders.nThis part of ISO 10472 does not cover particular hazards for continuous stand-alone washing lines for endless towels.nThis part of ISO 10472 does not cover the hazards caused by processing work which may create an explosive or flammable atmosphere inside the machine.nThis part of ISO 10472 complements the basic requirements laid down in ISO/TR 12100-1 and ISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures for attaining the required safety level.nThis part of ISO 10472 does not apply to ancillary equipment, e. g. chemical store and supply pumps, steam valves and supply pipework, vent systems, work feed systems and discharge systems and ducting to the atmosphere.

ISO 10472-4-1997工业洗衣机安全要求 第4部分:空气干燥机

This part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with air dryers, and in particular with tumble dryers having a net usable cage volume > 160 | and tunnel finishers including associated conveyors and cabinet dryers.nThis part of ISO 10472 complements the basic requirements as laid down in ISO/TR 12100-1 and ISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures for attaining the required safety level.nThis part of ISO 10472 does not apply to ancillary equipment.

ISO 10472-5-1997工业洗衣机安全要求 第5部分:织物熨烫机、进布机和折布机

This part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with flatwork ironers, feeders and folders, such as:n— cylinder and bed ironers for flatwork finishing having a contact area (for bed ironers under pressure) > 0,25 m;n— flatwork feeding machines for the automatic feeding of flatwork into bed or cylinder ironers, or directly to folders;n— flatwork folding machines for the automatic folding of flatwork in association with cylinder and bed ironers;n— folding machines for the automatic folding of small pieces (excluding endless towels);n— multi-function machines.nThis part of ISO 10472 complements the basic requirements as laid down in ISO/TR 12100-1 and ISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures for attaining the required safety level.nThis part of ISO 10472 does not apply to ancillary equipment, e. g chemical supply pumps, steam valves and supply pipe work, vent systems, work feed systems and discharge systems and ducting to the atmosphere.

ISO 10472-6-1997工业洗衣机安全要求 第6部分:熨烫及熔压机

This part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with ironing and fusing presses used in the laundry, garment and dry-cleaning industry, and in particular:n— scissor presses;n— cabinet presses;n— drawer presses;n— rotary presses (carousel) and other presses with multiple bucks.nThis part of ISO 10472 complements the basic requirements as laid down in ISO/TR 12100-1 and ISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards (see EN 1050) and on selecting measures for attaining the required safety level.nThis part of ISO 10472 does not apply to ancillary equipment, e. g steam boilers, steam valves and supply pipe work, vent systems, work feed systems and discharge systems, and ducting to the atmosphere.